Greasing suggestion needed

/ Greasing suggestion needed #1  

rthrbhntg

New member
Joined
Mar 11, 2012
Messages
9
Location
Delaware Co NY
Tractor
Kubota MX5100
Any advise on after how many hours to grease the pto shaft and best methods for a mx5100?
 
/ Greasing suggestion needed #2  
i grease my mowers after every use.. that includes the telescoping frive shafts and joints and yokes.. pushes dirt out.. good lub for a high stress area..
 
/ Greasing suggestion needed #3  
My Woods RD7200 mower suggest 25 hours. I adhere to that.
 
/ Greasing suggestion needed #4  
I grease about every 10 hours of mowing use, Which where I live is only 2 or 3 times a year at most. When I mowed 7 acres at another location, I greased every mowing session.

James K0UA
 
/ Greasing suggestion needed #5  
Were you referring to the PTO stub on the back of the tractor? If so, a cleaning to get the grit off and a very light coat of grease once in a while is enough. You don't want gobs of grease hanging off and attracting dirt. I use the rubber cover it came with most of the time to keep it clean when I'm not using the PTO.

Sean
 
/ Greasing suggestion needed #6  
Were you referring to the PTO stub on the back of the tractor? If so, a cleaning to get the grit off and a very light coat of grease once in a while is enough. You don't want gobs of grease hanging off and attracting dirt. I use the rubber cover it came with most of the time to keep it clean when I'm not using the PTO.

Sean

Ditto that

Charlie
 

Marketplace Items

2021 Bobcat UV34 4x4 Gas Utility Cart (A64553)
2021 Bobcat UV34...
2012 PREMIER 4NNT PORTABLE PUMP (A63276)
2012 PREMIER 4NNT...
SHOP BUILT TRI-AXLE LOWBOY TRAILER (A63291)
SHOP BUILT...
199 (A64278)
199 (A64278)
2014 Ford Taurus Sedan (A64557)
2014 Ford Taurus...
2014 Chevrolet Impala Sedan (A64557)
2014 Chevrolet...
 
Top