Grasshopper ZTR flail mower

   / Grasshopper ZTR flail mower #51  
Iowa Farm Equipment, the company that retails the flail deck, recommends AT LEAST 25hp diesel, or 30hp gas. I wouldn't run it with less than 28hp. I run a 60" flail on my 25hp Toro Groundsmaster, and it could really use the extra ponies. It gets the job done, but not as fast as I'd like. The new tier 4 emissions has cut Grasshopper diesels back to 24hp... so I'd either find an older 928 or 930-D... or a gas model with over 30hp. I think they're releasing the 38hp gas model later this year.


Here is a video link showing the 63" Flail on the Grasshopper 900D

Grasshopper Peruzzo Flail Mower 16 HD - YouTube
 
   / Grasshopper ZTR flail mower #52  
Thanks IFE. Was thinking I had
read about a shield but hadn't talked to dealer yet. Should help a lot. I am liking this mower so far.
 
   / Grasshopper ZTR flail mower #53  
Hello tractorworks. Wondering if I could get an update on how you got along with your flail mower after a full seasons use? Thanks for any information you would care to give.
 
   / Grasshopper ZTR flail mower #54  
Hello tractorworks. Wondering if I could get an update on how you got along with your flail mower after a full seasons use? Thanks for any information you would care to give.

Got along very well. There were/are a couple issues.

Deck is pretty heavy and rests on front gauge wheels. If property was wet it was easier to get stuck. Last year was very wet so I did not get to use it as much as anticipated.

Still trying to reduce chaff buildup on radiator and drive shaft. Workable on most properties but I have one in particular that I have to use a different mower.

On dry property that is maintained 2 to three times a year it is perfect. It is so nice driving forward in a small very maneuverable brush hog. Ability to trim under trees without having to look back continuously is priceless.

One estimate in particular was 16 hours as a start, to see what needed to be done at the end of that. I actually finished in 6 hours...

Pretty happy with build quality. A little concerned with built in jack but it works if you remember the combination.

Overall happy with purchase. Sorry for the delay. I don't get on here as often as I used too.
 
   / Grasshopper ZTR flail mower #55  
Thanks for the update. I'm still trying to decide.
 

Tractor & Equipment Auctions

2008 CATERPILLAR 304C CR EXCAVATOR (A51242)
2008 CATERPILLAR...
Miller Bobcat 225G Welder (A49461)
Miller Bobcat 225G...
Vacuworx Vacuum Lifter Pad (A50860)
Vacuworx Vacuum...
2025 K0311 UNUSED Galvalume Corrugated Steel Panel (A50860)
2025 K0311 UNUSED...
2020 JLG 1732 4x4 Rough Terrain Telehandler (A49461)
2020 JLG 1732 4x4...
GM Coach Bus (A50860)
GM Coach Bus (A50860)
 
Top