rswyan
Super Star Member
- Joined
- May 12, 2004
- Messages
- 12,174
- Location
- Northeast Ohio
- Tractor
- Kubota B2910, Cub Cadet Pro Z 154S, Simplicity 18 CFC, Cub Cadet 782
62F and partly cloudy @ 12:00, heading up to around 66F for the day's high. Low this morning was 44.6F.
Looks like there's a chance of rain again in the Ten Day next weekend.
Just fixed my second cup.
After taking inventory yesterday I found we were low on fully coated posts so I went back to coating more sides and got another 10 sides done with 3 more partially done. Should get those finished up today.
That was after cleaning up the mess caused by our last rain.
Thought I had the small cans with the asphalt and the brushes in them covered (under the hay wagon) but apparently not well enough. Full of water ...
Also got the cross brace for the southeast corner post cut to length.
I have two 6' 4 x 4 posts to use as headers for the gates. Both are bowed pretty good and I realized that this would not allow the upright posts that they will be attached to, to remain plumb so I trimmed both the ends on each of those on the Delta chop saw to allow the uprights to be plumb.
With the recent rain and cooler weather grass has really started to grow once more, won't be long until the front will need cut again.
Agenda for the rest of the day:
Trip to Menards for the 12" drill bit and to exchange some items.
Birthday party later for a local friend.
See what else I can get done with whatever daylight remains.
Hope everyone is having a decent Saturday ...
Looks like there's a chance of rain again in the Ten Day next weekend.
Just fixed my second cup.
After taking inventory yesterday I found we were low on fully coated posts so I went back to coating more sides and got another 10 sides done with 3 more partially done. Should get those finished up today.
That was after cleaning up the mess caused by our last rain.
Thought I had the small cans with the asphalt and the brushes in them covered (under the hay wagon) but apparently not well enough. Full of water ...

Also got the cross brace for the southeast corner post cut to length.
I have two 6' 4 x 4 posts to use as headers for the gates. Both are bowed pretty good and I realized that this would not allow the upright posts that they will be attached to, to remain plumb so I trimmed both the ends on each of those on the Delta chop saw to allow the uprights to be plumb.
With the recent rain and cooler weather grass has really started to grow once more, won't be long until the front will need cut again.
Agenda for the rest of the day:
Trip to Menards for the 12" drill bit and to exchange some items.
Birthday party later for a local friend.
See what else I can get done with whatever daylight remains.
Hope everyone is having a decent Saturday ...