Good morning!!!!

   / Good morning!!!! #106,841  
RNG, that's a big tank there. I'd be tempted to buy a couple of those concrete stops they use in parking lots. Get them close and attach them to the 2 feet on the bottom of the tank. Almost anything short of a full slab will still settle and move. The advantage of the parking lot stop is, you can lift one side at a time and throw a little sand under them to re-level them in the future. I'm guessing that you might want that tank to have one end ever so slightly higher to help the liquid pool at the pickup tube end. (For your liquid bottle filler).

Priceless! Thanks, Kyle:thumbsup:
 
   / Good morning!!!! #106,843  
Is python programming for a chip or is that a new language?
.

Python is an object oriented interpreted language. Been around since 1991, so that is almost forever. We are using it for automated software testing. I’ve used it at various times before. I will be writing some smoke tests, testing basic functions through an automated nightly run via Jenkins CI. Will test software written for an FPGA based system.
I’m looking forward to getting back into more software development. Right now my work time is spoken for 120%, but I’d rather be busy.
 
Last edited:
   / Good morning!!!! #106,844  
Getting a cold. Sore throat, etc. everything I don’t need. And I was fine Tuesday when I saw my Dr.

Retrieved my wife from VA yesterday. Her dad having memory issues but overall much better. He Already fell or slid down once trying to get out of bed without help. He can’t remember to use the call button. Couldn’t think of who I was. Still pretty confused. When we left he tried to get up by himself and they had to grab him.
My wife and her sister from NC will take turns going down and helping. Her mom is in good health.
At least he is close, just about 15 min from their house.

2 accidents on I81 forced us onto the back roads going down. Then another accident coming back forced another bypass. I81 is awful with accidents anymore.
 
   / Good morning!!!! #106,846  
Good morning, temp is all of 23°F and going up to 28. Wind WSW 13 mph. 60% chance of flurries.

We got 3" of snow overnight. The tractor block heater is turned on and I will go out and plow today.

That is all that is on my plate for today. After plowing, energy conservation.


Have a safe day all
 
   / Good morning!!!! #106,847  
good morning all. Chilly 27 degrees out, heater blazing away in greenhouse, keeping it around 64 in there overnight.
a little warmer today, up to 58 and then rain tonight.

Bill enjoy your snow plowing and then come in and get extra warm.

I'm going to spend a little time on second floor organization, primarily doing a triage on a huge pile of xmas decorations that I have no need for. Goodwill said they would take it all, xmas stuff sells year round. Not going to lug anything heavy either...just throwing stuff in trash bags and will get someone else to take it down to my truck. It's a long hike out to the parking lot and that's how I messed up my back several months ago. At some point I should learn...

Nut orchard on other side of tree line is covered in onion grass six inches tall.
Sunny day today, might very slowly run the JD mower in that area, if only to get some fresh air.
 
   / Good morning!!!! #106,848  
2HP needed to grate cheese for pimento cheese large blocks of cheese destroyed last one kitchen aid so we are going to try Restrauant grade. Her pimento cheese is very good

27 high of 54 today not sure what we will do today, have some flowers putting on a show forsythia just starting their show

Let’s just say grapple is more than doing the job

Prayers for all
 
   / Good morning!!!! #106,849  
2020-02-16, 0555

26 right now...a lot more pleasant then the minus 11 yesterday at this time! High in the mid-30's today.
I cleared the walks yesterday...didn't do a great job, but the powder atop the frozen snow is off. Then the snow blower's batteries needed recharging.
I'll hit the drive today sometime.
I also want to visit my neighbor's. The wife (50 or 51, I think) has breast cancer which has spread. I don't know all the details or her time left, but we want to support her as much as we can
 
   / Good morning!!!! #106,850  
I see weather forecast for end of week is super cold, 24 here, which is where some varieties of flowers and shrubs get unhappy.
That means even colder weather up North. I'm betting we'll get through this winter here without any snow at all.
You never know though, if the incoming cold air catches the end of some precip and the world turns white. And the cars go in the ditches...

nice to do Roy.
 

Tractor & Equipment Auctions

New/Unused 7ft 35 Drawer Stainless Steel Workbench (A51573)
New/Unused 7ft 35...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
Loader Arm (A51691)
Loader Arm (A51691)
2009 IC Corporation PB105 School Bus (A51692)
2009 IC...
New Wolverine Skid Steer 3pt Hitch Quick Connect (A53002)
New Wolverine Skid...
IMPORTANT PLEASE READ!!!! TERMS AND CONDITIONS (A51572)
IMPORTANT PLEASE...
 
Top