Good morning!!!!

   / Good morning!!!! #104,631  
Same issue as you have. Not sure you could fix it with replacing valve. I have 5 different valves on my tractor. They all leak down some. More noticeable with my small cylinders on top and tilt.

I got mine from Agristoreusa.com. 10 1/16" kit.

Rick, if you order one of the valves. Make sure it will fit you cylinders. I need to modify mine to make it work. Which I was aware of before I bought.
 
   / Good morning!!!! #104,632  
28°

In to work a little earlier, but waste lots of time in traffic going early.

Calling for 1-3” snow later. That will shut down this area
 
   / Good morning!!!! #104,633  
When I bought my last house it came with a tiny Jotul wood stove. Was cute. I sold it and bought a stove that would hold a 24” piece of wood.
 
   / Good morning!!!! #104,635  
Rick, if you order one of the valves. Make sure it will fit you cylinders. I need to modify mine to make it work. Which I was aware of before I bought.

Thanks Ron. I’m going to put significant heat on LS to resolve this ... before going that route.
 
   / Good morning!!!! #104,636  
Thanks Ron. I’m going to put significant heat on LS to resolve this ... before going that route.

I’m not sure I’m understanding exactly what you and Ron are talking about with the valves, maybe I’m just dense. I’d like to understand it if you don’t mind dumbing it down a bit.
 
   / Good morning!!!! #104,637  
Just started to snow here in upper MD, but almost quit after about 5 minutes. Forecast is for 1-3”, but I’ll believe it when I see it!
 
   / Good morning!!!! #104,638  
Just started to snow here in upper MD, but almost quit after about 5 minutes. Forecast is for 1-3”, but I’ll believe it when I see it!

I left work before it started there, but was already accumulating at my house.
Was in some heavy snow on I70.
Around 1/2” on now and snowing steady. IMG_3079.JPG
 
Last edited:
   / Good morning!!!! #104,639  
I’m not sure I’m understanding exactly what you and Ron are talking about with the valves, maybe I’m just dense. I’d like to understand it if you don’t mind dumbing it down a bit.

Check valves are an added safety feature that keep the cylinder locked in position and prevent drift.
 

Tractor & Equipment Auctions

2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2020 ISUZU NPR 18FT BOX TRUCK (A52141)
2020 ISUZU NPR...
Massey Ferguson 65 Tractor (AS IS) (A50774)
Massey Ferguson 65...
John Deere 843 Corn Head (A50514)
John Deere 843...
New Kivel Walk Behind Pallet Forks (A50774)
New Kivel Walk...
2020 KUBOTA RTV X1100C UTV (A51406)
2020 KUBOTA RTV...
 
Top