Good morning!!!!

   / Good morning!!!! #104,631  
Same issue as you have. Not sure you could fix it with replacing valve. I have 5 different valves on my tractor. They all leak down some. More noticeable with my small cylinders on top and tilt.

I got mine from Agristoreusa.com. 10 1/16" kit.

Rick, if you order one of the valves. Make sure it will fit you cylinders. I need to modify mine to make it work. Which I was aware of before I bought.
 
   / Good morning!!!! #104,632  
28°

In to work a little earlier, but waste lots of time in traffic going early.

Calling for 1-3” snow later. That will shut down this area
 
   / Good morning!!!! #104,633  
When I bought my last house it came with a tiny Jotul wood stove. Was cute. I sold it and bought a stove that would hold a 24” piece of wood.
 
   / Good morning!!!! #104,635  
Rick, if you order one of the valves. Make sure it will fit you cylinders. I need to modify mine to make it work. Which I was aware of before I bought.

Thanks Ron. I’m going to put significant heat on LS to resolve this ... before going that route.
 
   / Good morning!!!! #104,636  
Thanks Ron. I’m going to put significant heat on LS to resolve this ... before going that route.

I’m not sure I’m understanding exactly what you and Ron are talking about with the valves, maybe I’m just dense. I’d like to understand it if you don’t mind dumbing it down a bit.
 
   / Good morning!!!! #104,637  
Just started to snow here in upper MD, but almost quit after about 5 minutes. Forecast is for 1-3”, but I’ll believe it when I see it!
 
   / Good morning!!!! #104,638  
Just started to snow here in upper MD, but almost quit after about 5 minutes. Forecast is for 1-3”, but I’ll believe it when I see it!

I left work before it started there, but was already accumulating at my house.
Was in some heavy snow on I70.
Around 1/2” on now and snowing steady. IMG_3079.JPG
 
Last edited:
   / Good morning!!!! #104,639  
I’m not sure I’m understanding exactly what you and Ron are talking about with the valves, maybe I’m just dense. I’d like to understand it if you don’t mind dumbing it down a bit.

Check valves are an added safety feature that keep the cylinder locked in position and prevent drift.
 

Tractor & Equipment Auctions

2017 Nissan Frontier Ext. Cab Pickup Truck (A51692)
2017 Nissan...
250ft Roll of Copper-Clad Aluminum Building Wire (A55852)
250ft Roll of...
2017 KUBOTA SVL75-2 SKID STEER (A52707)
2017 KUBOTA...
KUBOTA M7-132 LOT NUMBER 31 (A53084)
KUBOTA M7-132 LOT...
WB 36" PIN ON DITCHER BUCKET (A52707)
WB 36" PIN ON...
2017 FREIGHTLINER M2 BOX TRUCK (A52141)
2017 FREIGHTLINER...
 
Top