Good morning!!!!

   / Good morning!!!! #41,961  
2016-01-28, 0303

18 right now...high today of 38 and maybe snow showers.

Got the truck back yesterday. Turned out to be a sensor that measured air flow. The mechanic has misdiagnosed the problem, initially. He was getting lean codes from the scanner which would indicate the fuel pump. As jammed up as the sensor was, one would have expected the engine to indicate a rich condition. Anyway, I told him to leave the replacement fuel pump in and replace the sensor. Ran good on the way home...hope it gets me to Connecticut this morning!
So, got a very good break on the tow (free) and the fuel pump price (knocked a hundred bucks off).

BTW, the sensor was clogged due to a mouse in the air cleaner housing....had a **** of a nest built up! I wouldn't expect a mouse moving an staying in a vehicle that is driven daily. I keep an eye on the tractor...but the truck, no...just wouldn't expect that!
 
   / Good morning!!!! #41,962  
We are white over with frost this morning. Hopefully that will have some of the plants thinking twice about making an early appearance.

Not too bad then Roy, that mouse must have appreciated you warming the nest every day.
 
   / Good morning!!!! #41,963  
That's good news, Roy.
Not surprising about to the mouse through. I've had 3 instances. Had my previous Tacoma in for servicing and the tech brought me a filter that had become a home. Twice I've lost the windshield washer function in my Tundra due to mouse munching. I keep some deterrent packets in the engine compartment and my fingers crossed.
 
   / Good morning!!!! #41,965  
14F clear sky upper 30's for high...not bad weather for end of January. :)

Glad you got good break Roy, amazing at times something so small can cause BIG headache. :(

Enjoy the day all.
 
   / Good morning!!!! #41,966  
24 this morning high of 41 later snow melting away maybe some real work Friday
 
   / Good morning!!!! #41,967  
57 going to 68. They claimed it was going to rain all night, I don't even see any dew out yet. Supposed to rain all day, we will see. Got some work in town today hanging a door, then fixing water hammer issue. Easy day.

Drew, brakes are not about law as much as they are safety. And with the hills in Amish country, very much needed be it PA or OH. My wagon has a running gear that was homemade and they used elect. brake hubs due to cost I am sure. The Amish use Hydraulic brakes like what is in your car, or band brakes which is a band that tightens around the outside of the hub like what is on my forecart. Then some period wagons use friction brakes on the outside which is levered like you saw on the old "Wagon Train" shows. What I was doing was trying to save money, and make something work and be appealing. You know, reinventing the wheel. :D

On the way home last night, the wife and I stopped at the furniture store to buy some new pillows and now have a new bed being delivered on the 4th.
 
   / Good morning!!!! #41,968  
20 going to 47. Haircut and gym day.

Roy, have had mice get in engine compartment, but fortunately, no damage. One figured how to get into my wife's SUV, and had to bait a trap to catch him...he was eating my wife's little bag of travel popcorn. On the tractor, the mice build on top of the plastic gas tank under the hood...easy removal...but the Carolina wrens built a nest on top of the rear end/transmission...hated to have to disturb that nest.
 
   / Good morning!!!! #41,969  
39 degrees going up to 48 today in light rain all day
David, I decided not to run conduit because 1)I already have electricity run to the barn overhead; this underground mess was pre-barn. 2) No desire/intention/plans to run heavy trucks back in this area again. And I am going down as far in the mostly sandy soil as the Ditchwitch will go this time. 3)I spent the money on the heavier gauge pipe

You know, reinventing the wheel.
Well Kev I'm glad you said it because I thought it, having come from PA and knowing that buggy/carriage matters are long known there.
Maybe a subscription to Amish Buggy Weekly?
Brakes? Isn't that what a WHOA is for?

Is this for a parking brake or to help the horses stop? I thought they did the stopping...must be for going down hills/slopes?
Clearly I have never been on a horse in my life. :rolleyes:
Hydraulic brakes are proportional and electric is supposed to be, but electric is cruder right? Grabby?
 
   / Good morning!!!! #41,970  
One of the reasons to periodically take the sheet metal engine covers off my Gravely exposing the air cooled fins of the engine is because there is a quarter sized hole on each side allegedly for access to something and the mice go in that hole. Built a nice nest on top of the engine but under the shrouding. Serious burning smell, shut down, clean out the crispy critter and nest. This is where I hope that black snake near the barn is happy and healthy, eat those mice!
 
   / Good morning!!!! #41,971  
Drinking first cup of coffee. 48° with clear skies this morning. Heading to 74° with mostly sunny skies. Going to sped the day at Barret Jackson Auction viewing all the cars. Dealer my Son bought his Shelby from sent all 49 Mustangs here to be auctioned.
Kev T, if wagon has standard electric brakes. The controller I linked with a foot switch should work well. It will need to be mounted in a waterproof container.
Roy, glad truck got repaired.
Good Morning All.
 
   / Good morning!!!! #41,972  
Good morning! 31˚ heading to 71˚ sunny - nice day when it warms up a bit.

Roy, my Moms new Camery had a mouse nest in the air filter also but she only drives it twice a week. I guess they can't put screens in the air entrance.

PW is back together and working as designed, thanks to the morning crew especially RNG.

Yesterday we got new chairs for the dining table. They were all arm chairs that swivel, rock and roll, and did not fit under the table. Since the table is a early 1900 oak table and was low for the smaller people back then, I raised the round legs up two inches with these from Lowes Shop 2-1/2-in Beech-Birch-Hickory Classic Bun Feet Wood Table Leg at Lowes.com

It came out good. Two projects complete in one day I need to slow down.
 

Attachments

  • table.jpg
    table.jpg
    38.9 KB · Views: 127
   / Good morning!!!! #41,973  
29 this morning and headed to 50 today. Still quite a bit of snow hanging around. But with temperatures pushing 60 this weekend it won't hang around much longer.

Going over to help a friend this morning load sheep. He's getting out of the sheep business for the time being. Said he's going to focus on improving his fences so he can do his original plan and run cattle and sheep in the same field. Will look at more sheep in a couple of years after fencing is done.

Then back to work on chicken coops and feed cows. Birds come back next week.

Roy good news on truck.
 
   / Good morning!!!! #41,974  
Good Morning! 46F @ 5:00AM. Showers this morning becoming less numerous during the afternoon hours. High 59F. Winds S at 5 to 10 mph. Chance of rain 60%.

Another storm system rolls in for tonight and Friday, maybe as much as an inch and a half of rain predicted. We shall see. Weatherman on TV last night still saying that this area is still in "Exceptional Drought" condition, and only 95% of normal for rainfall year to date.

Spent a couple hours spraying weeds yesterday afternoon, 12 gallons of 3% glyphosate from the backpack sprayer to cover the equipment yard gravel and upper parking area. Also decided to do what's left of the grass in the back yard, as there hasn't been enough water to sustain it for two summers now. When spring comes I'll dig out the sprinkler heads, put in drip, and plant a few shrubs. The rest'll get a layer of decomposed granite to go along with the rest of the yard.

Everybody makes mistakes, Roy. It's what they do to fix 'em that counts, and it sounds like your mechanic did alright by you.
 
   / Good morning!!!! #41,975  
Good morning! 31˚ heading to 71˚ sunny - nice day when it warms up a bit.

Roy, my Moms new Camery had a mouse nest in the air filter also but she only drives it twice a week. I guess they can't put screens in the air entrance.

PW is back together and working as designed, thanks to the morning crew especially RNG.

Yesterday we got new chairs for the dining table. They were all arm chairs that swivel, rock and roll, and did not fit under the table. Since the table is a early 1900 oak table and was low for the smaller people back then, I raised the round legs up two inches with these from Lowes Shop 2-1/2-in Beech-Birch-Hickory Classic Bun Feet Wood Table Leg at Lowes.com

It came out good. Two projects complete in one day I need to slow down.
Nice upgrade on the table. What did you do with the original chairs?
 
   / Good morning!!!! #41,977  
Good morning everyone. Enjoying a cup of coffee and watching the sunrise. Looking forward to the next couple of days in the 60's. Nice break from winter.
Plan to get the tractor out and do some cleanup.
 
   / Good morning!!!!
  • Thread Starter
#41,979  
I had a mouse build a nest in a s10 I that was a daily driver. I was driving down the road, had smoke coming out! I found a big nest there, cleaned it out, then continued on. It cost me a new set of plug wires.

A little gloomy here, looks like a little snow here.
 

Tractor & Equipment Auctions

SDLL30 skid steer with bucket (A56857)
SDLL30 skid steer...
2007 Ingersoll Rand G240 240kVA 3-Phase Towable Diesel Generator (A59228)
2007 Ingersoll...
MACK T/A DUMP TRUCK (A58375)
MACK T/A DUMP...
SHOP TOOLS (A58214)
SHOP TOOLS (A58214)
JOHN DEERE 644K WHEEL LOADER (A58214)
JOHN DEERE 644K...
500 BBL FRAC TANK (A58214)
500 BBL FRAC TANK...
 
Top