Good morning!!!!

   / Good morning!!!! #120,821  
rip, glad you got to spend time with your girls.

My daughter had her confirmation in church today along with about 11 other young people. They all had to pick and recite a favorite bible verse. She looked beautiful in her white dress.
 
   / Good morning!!!! #120,822  
45F and cloudy @ 12:30, headed up to a high of only 49F with a chance of showers ... :(

Did some cleaning/straightening up in basement yesterday, likely more of that on tap for today.

Rechecked pressure in water tank and it's holding ... :thumbsup: Probably check it again in a month.

Cleaned rust stains out of right side of stationary tub (phosphoric acid works great for that ... ;))

Drew 20 gallons of water for fish tanks.

Got filter and screen reinstalled in furnace. Also washed filter for big HEPA tabletop air cleaner, will put that back together once it's dry..

Got pilot holes all drilled and deck screws installed in barn owl nest box. Still have to install divider, the two doors, and closure hooks ... that might happen today ... along with cutting some boards ... :rolleyes:

Delivery of pump for parts washer rescheduled for today or tomorrow.

Somebody knocked the bottom off nugget feeder dumping the peanuts, need to clean that up and refill tube feeders with sunflower seeds.

Hope everyone has an enjoyable. productive, and safe day ... :thumbsup:
 
   / Good morning!!!! #120,823  
Lost a couple hours yesterday morning to YouTube watching wet blaster videos, RS. Seems like lots of home brew setups out there, but the same basic problems remain of keeping the grit out of areas where it doesn't belong, and removing metal plating from parts that need it.

Not likely to be a problem with the things I'm working on.

Dry blasting with ultra fine media will produce the same finish as the wet blasters with a lot less trouble.

Suspect the health hazards with wet blasting are way less than dry blasting ... unless you're using a blasting cabinet with a dust collector of course ... :D
 
   / Good morning!!!! #120,824  
Nice picture, and I'll bet you make a lot of birds happy too. Our new barncat "Waffles", an orange and white female, is providing us good entertainment. Especially when the neighbor's male cat and her get into a scrap.



I have a new friend who is going to go with me.

MSMA also works if you can get your hands on it. Maybe some of your cousins that do hay can offer advice.



Hope the stiffness goes away soon. Those Jackdaws are saying "Hey, here comes the human, who whacked himself yesterday to provide us entertainment."



Yes, thank you Irv!

RNG, still wished you were a Texan nearby. I'd take you too. Just have to do a virtual update for you guys. Looking at the weather, it might be best to hold off until Thursday...

"MSMA also works if you can get your hands on it."

I believe the EPA banned .. or at least tried to ban MSMA .. about 15 years ago because of it's arsenic content and possibility of groundwater contamination.

I wouldn't touch it .. but, that's just me.
 
   / Good morning!!!! #120,825  
... Michigan had 3,338 new Covid cases yesterday. Not sure what to believe anymore. ...

The Houston firefighter (son of a friend) I mentioned a while back who had come down with it and was being taken of by his wife is doing better apparently.

Unfortunately, his wife also came down with it, was admitted to the hospital, and, as of the last we heard about a week ago, had been put into intensive care.
 
   / Good morning!!!! #120,826  
   / Good morning!!!! #120,827  
Luther, putting up storm windows. Glad I changed out those type of windows 40 years ago. I still have to clean screens.

Hi Ron
The windows are crank-out awning windows, the storms are on the inside so not to bad to change, The biggest pain is washing them.
Keep the pics coming they are great.
Here's an old one not at the feeder. (if it works)
 
Last edited:
   / Good morning!!!! #120,828  
Eric, quite willing to give my address to send the checks
My 1st choice is my battery tools over the corded except in cases where clearly in appropriate. I particularly like the 1/4” impact drivers and have a couple. Was pleasantly surprised how well the reciprocating saw cut that metal with some good Milwaukee blades. Sophie has own for cutting palm fronds with a wood blade. I keep 4 batteries at the ready.
 
   / Good morning!!!! #120,829  
Love sushi, Rip. Sadly our favorite place is still take out only. Makes sense in that they alway had a good takeout business so why bother with the extra hassle of dine in. t one point I had ordered every sushi variant on their menu. Make great tempura as well.
 
   / Good morning!!!! #120,830  
Can’t think of any highway I like in NoVa/DC area. When we lived there it was always stressful to go most anywhere, but especially 95/Spaghetti Junction. I found it amazing how commuters and their commute scheduled ruled. I was always used to working late when necessary, but not there. Took a major major to ask someone to miss their commute home.
So the tolls are back??? Amazing. I remember when removed along 95
 
   / Good morning!!!! #120,831  
RNG, thank God it’s not the whole hand, Sophie would be scraping me off the floor. I suspect arthritis as well, have a few finger joints that have lost their svelteness of youth. Seems if I do more finger intensive tasks then I know I’ll pay for it about mid afternoon.

I found if I leave wires long enough that I have to trim 1/2 or so I do better. I saw online there are some connectors the wire actually passes thru, but apparently need a different crimper. Not going to happen. Unless I replace some of the older RG5 cables I don’t have many to make.
 
   / Good morning!!!! #120,832  
Furry looking bird, Dennis
 
   / Good morning!!!! #120,833  
I saw online there are some connectors the wire actually passes thru, but apparently need a different crimper. Not going to happen. Unless I replace some of the older RG5 cables I don’t have many to make.

I have one of the EZCrimpers for RJ45s
 
   / Good morning!!!! #120,834  
all I can say is these tasted better than they look....
oats, bananas, maple syrup, honey, cinnamon, apple sauce, vanilla and cranberries
no sugar, no flour, no salt, no butter

sending a plateful home with my helper. His mom makes everything with sugar and butter, big time.
I imagine these will get fed to their birds...;)
 

Attachments

  • IMG_0154.JPG
    IMG_0154.JPG
    5.8 MB · Views: 158
   / Good morning!!!! #120,835  
Tks wngsprd it was a week go Friday very nice
Thanks BEF now 67 and moving on up So to speak
 
   / Good morning!!!! #120,836  
all I can say is these tasted better than they look....
oats, bananas, maple syrup, honey, cinnamon, apple sauce, vanilla and cranberries
no sugar, no flour, no salt, no butter

Even large quantities of natural sugar, (maple syrup/honey/apple sauce will make my hands act up accompanied with large amounts of pain. 1 of those cookies would do me in for sure.
 
   / Good morning!!!! #120,837  
53° and 1.14” of rain so far. Went to Ellen’s dad’s house this morning to check on him, he’s had some issues lately.
Getting ready to pressure cook a pork tenderloin for diner.

Sodamo, I’ve had my fingers lock, not much fun. Usually happened from repetitive motion.
Nice Cardinal picture Ron.
 
   / Good morning!!!! #120,838  
48F clear sky.

Good day for outside chores,wind was BIG help when blowing leaves now all caught up before tomorrow arrives.
Saw 3 flocks of geese heading SW 2 flocks had large number of birds...honking got your attention.
Not much plan for this evening,,,dinner recliner share bowl ice cream with kittens and little tv and early pillow time.

Enjoy the evening all.
 
   / Good morning!!!! #120,839  
Eric.
"I intend staying in for the rest of the day for a bit of rest. On Friday I foolishly tripped over a brick in the dark in my haste to shore up some boards keeping rain off the fresh mortar. I stayed upright, however the plank of wood I was carrying took the opportunity to clonk me on foot, knee and forehead, all in one go . Much better today, just a bit stiff"
-------------------------
OUCH... Rest and relax. :thumbsup:
 

Tractor & Equipment Auctions

2001 BOBCAT 773 SKID STEER (A60429)
2001 BOBCAT 773...
1408 (A57192)
1408 (A57192)
XCMG CV83PD (A53317)
XCMG CV83PD (A53317)
2025 MACK GRANITE GR64F DUMP TRUCK (A59823)
2025 MACK GRANITE...
(APPROX. 25) 4' X 8' X 3/4" OSB SHEETS (A52706)
(APPROX. 25) 4' X...
DEUTZ MARATHON 60KW GENERATOR (A58214)
DEUTZ MARATHON...
 
Top