Lea
Silver Member
- Joined
- Nov 13, 2011
- Messages
- 120
- Location
- Fort Frances Ontario
- Tractor
- john Deere model M kabota 2320 TLB
Snow Attachments Front mount
- Thread starter Lea
- Start date
- Views: 6325
OP
Lea
Silver Member
- Joined
- Nov 13, 2011
- Messages
- 120
- Location
- Fort Frances Ontario
- Tractor
- john Deere model M kabota 2320 TLB
Roger
No the only bearing I need is at front, I have put about four hours on it now and it runs perfect
No the only bearing I need is at front, I have put about four hours on it now and it runs perfect
ff1221
Bronze Member
- Joined
- Jan 20, 2008
- Messages
- 90
- Location
- Kincardine Ontario Canada
- Tractor
- Massey 5455 cab & Loader John Deere 4320 cab & Loader John Deere 2520 w/loaderKubota KX41-2
Just realized I didn't get pictures for you, my apologies for that but I see you are making out ok looks good. If there is any info you need don't hesitate to ask, now that the snow has slowed up I can get more done.
skyhook
Veteran Member
- Joined
- Mar 12, 2013
- Messages
- 1,906
- Location
- Canada Ontario
- Tractor
- 1996 Kubota L4200 GSTC,(sold) 1994 JCB 210S 4x4x4
Looks good, Lea,
when you get a chance later, let us know where and how much those gear boxs were,
and how you did the shaft etc, etc etc.:thumbsup:
when you get a chance later, let us know where and how much those gear boxs were,
and how you did the shaft etc, etc etc.:thumbsup:
OP
Lea
Silver Member
- Joined
- Nov 13, 2011
- Messages
- 120
- Location
- Fort Frances Ontario
- Tractor
- john Deere model M kabota 2320 TLB
Here is more pics of finished blower. This blower is a 66" Farm King that I bought new for $1950 and then mounted on the front, all together I have around $3200 invested in the blower and the cab. The big blower is one put together last winter only to find auger was bent , I vibe rated so much I couldn't use it .
Attachments
OP
Lea
Silver Member
- Joined
- Nov 13, 2011
- Messages
- 120
- Location
- Fort Frances Ontario
- Tractor
- john Deere model M kabota 2320 TLB
Skyhook
I bought my gear boxes and most every thing else at surplus centre , they r clockwise rotation both of them and 1/1ratio since a snowblower turns counter clock wise and the rear pto turn clock wise u want your shaft out the front turning clock wise this will make the snowblower turn counter clockwise which is what u want. They cost around $145 apiece and I got all the shaft ends and couplers from them to, the had everything I need.
Lea
I bought my gear boxes and most every thing else at surplus centre , they r clockwise rotation both of them and 1/1ratio since a snowblower turns counter clock wise and the rear pto turn clock wise u want your shaft out the front turning clock wise this will make the snowblower turn counter clockwise which is what u want. They cost around $145 apiece and I got all the shaft ends and couplers from them to, the had everything I need.
Lea
skyhook
Veteran Member
- Joined
- Mar 12, 2013
- Messages
- 1,906
- Location
- Canada Ontario
- Tractor
- 1996 Kubota L4200 GSTC,(sold) 1994 JCB 210S 4x4x4
Thank's Lea, sounds good,
do me a favor next time,lol,, turn your tractor upside-down before taking pictures.
do me a favor next time,lol,, turn your tractor upside-down before taking pictures.
OP
Lea
Silver Member
- Joined
- Nov 13, 2011
- Messages
- 120
- Location
- Fort Frances Ontario
- Tractor
- john Deere model M kabota 2320 TLB
Skyhook
You know if you click on the pic it inlarges it and comes out so u can see it ,without standing on your head
You know if you click on the pic it inlarges it and comes out so u can see it ,without standing on your head
srs
Veteran Member
Lea, on my MAC all of them are upside down including the ones you posted in Build-It-Yourself (STEAM JENNY). I can't get them to be right side up either. Stanley