Fire extinguisher

[ptsg]

Here is mine. Mounted on the ROPS with my own bracket. I still maintained the ease of pulling the fire extinguisher fast. It just slides on a little hook on the top, while the bottom just have a strap that allow for the fire extinguisher to slide in.

 

[falfrenzy]

I too had difficulty finding the best mount and ended up going with a nylon version that straps on. Has worked extremely well for me and was easy to remove from my old tractor to my new.

View attachment 594099

I would recommended that you wrap some Scotch tape or a bread tie through your safety pin so it doesn't get snagged by brush, or fall out due to vibration.

 

[RNeumann]

I too had difficulty finding the best mount and ended up going with a nylon version that straps on. Has worked extremely well for me and was easy to remove from my old tractor to my new.

View attachment 594099

I’m more impressed by the nylon version that straps the tractor to the wall than I am the extinguisher straps!

 

[Smokeydog]

KID366242 - Vehicle Bracket for Pro 10 MP Fire Extinguishers https://www.amazon.com/dp/B005EO35IQ/ref=cm_sw_r_cp_api_i_SvYECb63KQRVY

 

[RNeumann]

View attachment 594180
KID366242 - Vehicle Bracket for Pro 10 MP Fire Extinguishers https://www.amazon.com/dp/B005EO35IQ/ref=cm_sw_r_cp_api_i_SvYECb63KQRVY

Can u tell us about the chainsaw mount?

 

[Smokeydog]

Scrap pile chainsaw, chain and tool holder. 5” square tube and 2x5” rectangle tube split. Bolt with spring for clamp. Doesn’t really need a clamp. Uses factory plastic blade guard which helps moving saw from shop, truck or worksite. Note adjustable rubber foot to add support for the saw. 1/2 plate on bottom. Welded to loader upright. Can safely carry chain, saw or tools on tractor.

 

[RNeumann]

View attachment 594188

Scrap pile chainsaw, chain and tool holder. 5” square tube and 2x5” rectangle tube split. Bolt with spring for clamp. Doesn’t really need a clamp. Uses factory plastic blade guard which helps moving saw from shop, truck or worksite. Note adjustable rubber foot to add support for the saw. 1/2 plate on bottom. Welded to loader upright. Can safely carry chain, saw or tools on tractor.

That looks good! Thx for sharing.

 

[Einthewoods]

Here is my setup. I have had it on for over a year and no issues with it.

Holder: https://amzn.to/2SFFqnU
Extinguisher: https://amzn.to/2XC5zYH

 

[thekkfan]

I have one mounted to the right side of my steering column in my cab. For those with a cab, make sure it can be reached from the ground outside of the cab.

 

[cathy liebchen]

big Velcro straps on the ROPS. $5