RjCorazza
Elite Member
A long time neighbor and friend has a Hustler that has been problem free for many years, and he can break an anvil.
Educate me on zero turns
- Thread starter gsganzer
- Start date
- Views: 3691
A long time neighbor and friend has a Hustler that has been problem free for many years, and he can break an anvil.
tradosaurus
Super Member
- Joined
- May 8, 2017
- Messages
- 5,975
- Location
- Texarkana, TX
- Tractor
- Kubota MX5400 HST, heavy duty bucket, 3rd function, R1 tires (rears filled), 2 remotes
True. Fortunately I can drive my UTV to a nearby gas station.Except I have UTV's too. Gas.
I believe Kubota sells diesel UTV's.
WM75Guy
Elite Member
We switched from a gas Kawasaki Mule to a diesel Kubota RTV-X. Now the 3 tractors, the ZD1211 ZTR, and the RTV-X are all diesels. They get refilled from a 58-gallon John Dow fuel pod on a small trailer. The chainsaws, blowers, the weed eater, and the pole saw are all battery powered. The only gas motor left is a small 50CC Honda on the pasture vacuum. A gallon of gas goes a long way.
EddieWalker
Epic Contributor
Are you using the electric chainsaw to cut firewood? or is it just for cleaning up after storms?
WM75Guy
Elite Member
Just cleanup.
OP
gsganzer
Elite Member
- Joined
- Jun 11, 2003
- Messages
- 4,113
- Location
- Denton, TX
- Tractor
- L3800 w/FEL and BH77, BX 2200 w/FEL and MMM
I can see a battery power being good to have in the UTV when driving around the trails of a property. Certainly for a lot of stop/start cutting. The perils of a gas powered saw is always starting them. It's even worse with todays saws, if they don't get run long enough for a second hot start. My Husky 550 is great on a cold start and a hot start. When it's only run a few minutes and then I try to restart is usually where the issue is.
