Chatter Fix for TC-45D

   / Chatter Fix for TC-45D #11  
JT, I looked at mine a little closer last night and it is a little looser than I previously recall. Still though, no rattle. I also noticed that there is not much room for the entire cover to move front-to-rear. Maybe you could loosen the clamp and slide the rear part more to the rear and the front part more to the front and thereby tighten the whole setup up. I think mine probably had only about a 1/8" free-play, when I would try to slide it front-to-back. Good Luck!
 
   / Chatter Fix for TC-45D
  • Thread Starter
#12  
Boy do I feel like a dummy! The cover (shroud) does have an integrated clamp nearest the transmission. Loosen the 4 bolts and extend it for a tighter fit. Previously, I examined this thing and I even fooled with it. The only excuse I can offer is that when the clamp is tight the seam is nearly invisible. Things are now quite again. This web site is great..... thanks all!

JT
 

Tractor & Equipment Auctions

2021 Doosan DX350LC-5 Hydraulic Excavator (A50322)
2021 Doosan...
2014 Gillig G27B102N4 31+56 Low Floor Passenger Bus (A50323)
2014 Gillig...
2012 BOBCAT E80 EXCAVATOR (A51242)
2012 BOBCAT E80...
Generac 5000Watt Heavy Duty Diesel Generator (A51691)
Generac 5000Watt...
NPK GH-7 Excavator Hammer (A50774)
NPK GH-7 Excavator...
BOBCAT QUICK ATTACH HYD SOD LAYER (A51244)
BOBCAT QUICK...
 
Top