O/K guys here is the answer to my FEL float detent problem. I forgot to update this post a few weeks ago but I've been spending wayyyyyy to much time at work.
Jim at Emerichs didn't want to tie my machine up so he told me to wait until I didn't need the loader for a few days, and then to drop off the 4 way valve.
The problem was water in the valve no parts required. It was taken apart, cleaned, and then packed with grease. It is a closed unit so the water does not come from rain or washing the tractor. The mechanic thinks condensation forms on the inside of the valve during the heat up and cool down cycle. It's filled with grease now so condensation can't form. Works better than ever. The mechanic told me that Kubota will probably be putting out a TSB on this.
Here again having a great dealer makes all the difference in the world. I dropped the valve off in the morning (before they were open) and it was ready that day. A valve kit had been ordered ahead of time. If it had needed parts that they didn't have in stock they would have had them shipped overnight.
Great Service Thanks to every one at Emerichs
