4707

[Bigpuddie]

my dealer said parts with shipping were much more than that. You got a very good deal.

Have you had any problems with clutches grabbing at idle? I have intermittent issues with tractor jerking forward while in idle, usually when cold. Dealer had factory rep adjust, accomplished nothing. When running machine at regular rpm, no issues, just at idle when cold. Very disconcerting to feel tractor jerk while in neutral...

I sure do like my new pin in hole stabilizers. Why they put that other variety on escapes me, only work for Cat 2 when most of our realities is a mix of both Cat 1 and 2. Maybe a supplier issue, maybe saving a few bucks where they shouldn't have. Now if I can get my tires swapped out for something better suited to me, what I really want are Nokian TRI 2's, I'd be a very happy guy.

My dealer sold them to me at cost. The stabilizers on mine are very good and stout. Most people with these tractors are using cat 2 implements, but I hear ya.

 

[CHF4]

My dealer sold them to me at cost. The stabilizers on mine are very good and stout. Most people with these tractors are using cat 2 implements, but I hear ya. View attachment 597785

They were stout for sure but slow changing twist twist twist.. there was only one hole to select then you had to twist. Isn’t that the same as yours?

I personally like these..

 

[Bigpuddie]

They were stout for sure but slow changing twist twist twist.. there was only one hole to select then you had to twist. Isn’t that the same as yours?

I personally like these..View attachment 598045

Your new ones are much better for Cat 1

 

[Bigpuddie]

Swapped the lighting to all LED

 

[Cyb33r]

Swapped the lighting to all LEDView attachment 599369

Looks awesome! What lights did you use?

 

[Bigpuddie]

Looks awesome! What lights did you use?

Thanks.

Off-Road LED Work Light/LED Driving Light - 6" Rectangular - 24W - 1,8 Lumens - Horizontal or Vertical Mount | Super Bright LEDs


Put these in the headlights :
H7 LED Fog Light Bulb Newest Version 3570 CSP-Chips LED Fog Lamp Bulbs White 6000K Use For Fog Lights https://www.amazon.com/dp/B07FPS35LN/ref=cm_sw_r_cp_apa_i_pfQQCbSQ25C3B

 

[Cyb33r]

Thanks.

Off-Road LED Work Light/LED Driving Light - 6" Rectangular - 24W - 1,8 Lumens - Horizontal or Vertical Mount | Super Bright LEDs


Put these in the headlights :
H7 LED Fog Light Bulb Newest Version 3570 CSP-Chips LED Fog Lamp Bulbs White 6000K Use For Fog Lights https://www.amazon.com/dp/B07FPS35LN/ref=cm_sw_r_cp_apa_i_pfQQCbSQ25C3B

Did you cut the stock wiring harnesses off or buy adapters? Did you do the rear lights as well? 30 degree in the front and 60s in the rear?

 

[Bigpuddie]

Did you cut the stock wiring harnesses off or buy adapters? Did you do the rear lights as well? 30 degree in the front and 60s in the rear?

Did the 30 degree front top, 60 degrees on side and rear. I did cut the factory plugs off and put Deutche connectors on. Pretty easy to do. Used the factory mounting brackets. Huge difference.

 

[Cyb33r]

Anyone with a Visio roof have any thoughts? How is the heat in the summer? Do you think it is worth the upgrade?

My dealer has a 4707 in stock without the Visio roof and I am trying to figure out how long the wait will be if I want one with that option.

 

[Bigpuddie]

Anyone with a Visio roof have any thoughts? How is the heat in the summer? Do you think it is worth the upgrade?

My dealer has a 4707 in stock without the Visio roof and I am trying to figure out how long the wait will be if I want one with that option.

I have it. Dont notice any added heat. There is a sunshade you can pull over it. If you do alot of loader work at full height, it's great. If you dont do alot of hay stacking or high loader work, you will be fine without it.