40x60x14 Shop

/ 40x60x14 Shop
  • Thread Starter
#101  

I think we are going to end up with something similar to this. IMG_2130.JPG
 
/ 40x60x14 Shop
  • Thread Starter
#103  
I've had a lot more fun in a hot tub then I have in a shop!!!!!

Me too! My "kids" are three teenage daughters so I hope they don't have the same expectation out of the hot tub. At least the shop will be more productive.
 
/ 40x60x14 Shop #105  
I think we are going to end up with something similar to this.View attachment 578933

Good deal. A few years ago on another property I installed 5 LED floods with motion sensors and I could NOT keep them from false triggering and I know a few things about motion sensors. I guess I could ignore them when they trip but I had to look. Never again LOL
 
/ 40x60x14 Shop
  • Thread Starter
#106  
Good deal. A few years ago on another property I installed 5 LED floods with motion sensors and I could NOT keep them from false triggering and I know a few things about motion sensors. I guess I could ignore them when they trip but I had to look. Never again LOL

No way we could stand any kind of motion light. It would shine directly into our bedroom window everytime it came on. My wife does NOT like to be woken up in the middle of the night! After the first night of false triggers I'd actually be scared that she would do something drastic to the shop.
 
/ 40x60x14 Shop #107  
All my LED lights outside my house are on a switch. We turn it on when it gets dark outside and we turn it off in the morning when we wake up. If we are sitting out on the porch and enjoying the evening, we turn them off. I've never met a motion sensing light that was reliable, and dusk to dawn are not much better.
 
/ 40x60x14 Shop #108  
All my LED lights outside my house are on a switch. We turn it on when it gets dark outside and we turn it off in the morning when we wake up. If we are sitting out on the porch and enjoying the evening, we turn them off. I've never met a motion sensing light that was reliable, and dusk to dawn are not much better.

No kidding. I put up with dusk to dawn for years until I installed programmable switches. They are 20 bucks at Home Depot and they are awesome!
 
/ 40x60x14 Shop #109  
Congratulations on your new shop! Did they use wooden blocks for rebar chairs (post # 7)?
 
/ 40x60x14 Shop
  • Thread Starter
#110  
Congratulations on your new shop! Did they use wooden blocks for rebar chairs (post # 7)?

Yep! As long as it works I’m good with it. He has a great reputation as a builder, hopefully I’m not they guy that gets a bad job.
 
/ 40x60x14 Shop
  • Thread Starter
#111  
IMG_2131.JPG
We have metal on the north side!
 
/ 40x60x14 Shop #113  
Might try to scrape up some of that gravel. Then start carrying dirt.
 
/ 40x60x14 Shop
  • Thread Starter
#115  
I really like your choices in color!!!

Thank you Eddie, I do too! I have to give my wife 100% credit for the choices though. She did a great job!
 
Last edited:
/ 40x60x14 Shop
  • Thread Starter
#116  
First day this week that they have worked on the shop. Got the pad uncovered, and started on the overhang on the corner.
IMG_2152.JPG
IMG_2153.JPGIMG_2154.JPG
 
/ 40x60x14 Shop #117  
Awesome. The porch is gonna be very nice.

When ur an old fart like me you can sit under it during a warm spring rain. :)
 
/ 40x60x14 Shop
  • Thread Starter
#118  
IMG_2161.JPG
We got doors while we were gone to visit family in IN for Thanksgiving. Best picture I’ve got since it’s a blizzard out there.
 
/ 40x60x14 Shop #119  
I like your door glass height much better than mine!!!! Yours look to be a little low but better than having to stand on tip toes to see out.

Are your doors 7 panel? I tried putting my glass in the third panel but they were just too low. So mine are in the fourth panel.
 
/ 40x60x14 Shop
  • Thread Starter
#120  
Mine are six panel with the glass in the third one up. Here is the view from the center of the shop.
IMG_1890.JPG
Bottom of the window is 52.5”.
IMG_1890.JPG
3” thick doors with double windows.
 
Last edited:

Marketplace Items

Ford 2 Row Corn Planter (A62613)
Ford 2 Row Corn...
2006 JCB 506C HIGH LIFT TELEHANDLER (A62613)
2006 JCB 506C HIGH...
Danuser 3 Point Post Auger (A65640)
Danuser 3 Point...
UNUSED WOLVERINE TDB-11-66W 66" BUCKET (A64281)
UNUSED WOLVERINE...
2016 Chevrolet Silverado 3500 Flatbed Truck, VIN # 1GB4KYC8XGF238980 (A65563)
2016 Chevrolet...
1901 T/A CAR HAULER TRAILER (A59914)
1901 T/A CAR...
 
Top