3010 reassembly help

[Jimdog571]

I still cant get it to go in all the way. When i took it back apart it looked like the shaft was hitting low. I used the alignment tool when i put the clutch pack an disc back on. I had it pretty straight and square today especially with the guide bolts. Not sure whats going on.

 

[Zebrafive]

If that's the case, rotating the engine might get it to go If the clutch disk was high, 1/2 a turn might lower it enough to engage the shaft.

 

[Jimdog571]

I've been turning the flywheel if that's what you mean.

 

[Zebrafive]

I've been turning the flywheel if that's what you mean.

Yes, that's what I meant.

My 2030 only has one clutch disk (PTO clutch is internal) and I have just eyeballed to center. It (on my 2030) is the inner shaft that engages it, and it has some play at the end.

 

[Jimdog571]

I finally got it together after wrestling with it for hours. I guess it just needed to be lined up exactly right. Thank you for your suggestions and help. I greatly appreciate it.

 

[Zebrafive]

It's good feeling when a split tractor comes back together! Especially when it takes a long time.

 

[DLTTrekkers]

Testdrive it ?
Nice feeling!
Did you smile ?

 

[Jimdog571]

Oh yeah awesome feeling. Works great. I cried a little when it went together.