hube2
Veteran Member
Sorry, I was talking only of the piston. Yes, the 3PT arms can be pushed up but this should not effect the piston and the arms should return to the lower level.
The comment about suction makes some sense, but there is over 12 inches of play in the arms on this machine To push hard enough upward to cause a suction in the piston would mean something pushing the implement up more than a foot with significant pressure. Yes, it's a possibility, but one that I find extremely unlikely.
The comment about suction makes some sense, but there is over 12 inches of play in the arms on this machine To push hard enough upward to cause a suction in the piston would mean something pushing the implement up more than a foot with significant pressure. Yes, it's a possibility, but one that I find extremely unlikely.