The selector on My Jinma 254 is stuck in 4WD. Any suggestions on what I can do? The selector gets half way but won't go further and I don't won't to force it I case I damage something. It should just move between the 2 easily.
2WD & 4WD Selector
- Thread starter tangles
- Start date
- Views: 1332
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
try shifting while creeping along. it may be something as simple as driveline run up from when it was parked.
if that don't help I'd jackup all 4 and place in neutral and block clutch and get a helper to wiggle tires to and from while you play with selector.
post back.
soundguy
if that don't help I'd jackup all 4 and place in neutral and block clutch and get a helper to wiggle tires to and from while you play with selector.
post back.
soundguy
wvpolekat
Platinum Member
I have had to "rock" my Kubota before. Just barely hit the reverse pedal while applying steady pressure to the lever, then go back forward. As soundguy said, things can get a bit bound up. Also, may want to drive it on a more slick surface. Mine has the most trouble on pavement.
