1020 hydraulics

[stonestacker]

got a1020 it had sit for a while, fired it up and no hydraulics! so added some fluid and still nothing loader or rear.
is it possible there is air in the lines or pump Thanks for your support Bill

 

[tthopskin@yahoo.ca]

from sitting a relief valve maybe stuck open try it 2-3 times a day it mite shut and your good to go ..some of the older tractors had a ball on a spring and it would stick open and shut down the hydraulics .. good luck

 

[stonestacker]

Thanks for the input,where would the relief valve be on the 1020?

 

[tthopskin@yahoo.ca]

that i dont know ...every tractor has them in different spots .good luck

 

[ac450]

that i dont know ...every tractor has them in different spots .good luck

Did you get it working? I have the same problem

 

[J_J]

Check to see if the pump is pumping fluid.

The pump may need primed.

Have you checked and replaced the hyd filters and cleaned the screen if it has one.