Egon
Epic Contributor
Spanner!
10 Hours In, found this laying in front of my bucket (see pic)
- Thread starter saxon11
- Start date
- Views: 22299
repete
Veteran Member
I know this is taking this post WAY off topic but one of the funniest things we used to do was on the rookies first night we would quietly sneak out to the apparatus bay and manually lift the bay door. Since we kept the fire engines plugged into air we could always release the brakes and roll the engine out the door with the sloped apparatus bay. Once outside we would quietly close the door, start the engine and drive around back. We would go back into the station and hit the house bells and wake the new guy up. He would tear out to the engine for his first run at night and dang if he didn't miss the engine.... 
We ALL had a good laugh as he became part of the family.
We ALL had a good laugh as he became part of the family.
bigcummins03
Bronze Member
It’s all good here can’t crack this nut
Oz_Kioti
Silver Member
In this part of the world, they're commonly just called a "shifter".
Then again, we call a "torch" what you guys call a flashlight.
jyoutz
Super Member
Many tractors have loops on the 3ph lift arms to store spare lynch pins. Check to see if maybe you just dropped a spare.
jyoutz
Super Member
I described it wrong. They are just 1” pins secured by those hair pin clips.
This type of pin without the loop at the end is what my implements came with:
category 2 tractor pins hairpin clips - Google Shopping
www.google.com
Last edited:
- Joined
- Feb 21, 2003
- Messages
- 26,976
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
Spanners have fixed jaw openings, aka open end wrench...
Egon
Epic Contributor
Hay Dude
Super Star Member
- Joined
- Aug 28, 2012
- Messages
- 18,615
- Location
- A Hay Field along the PA/DE border
- Tractor
- Challenger MT655E, Massey Ferguson 7495, Challenger MT535B, Krone 4x4 XC baler, (2) Kubota ZD331’s, 2020 Ram 5500 Cummins 4x4, IH 7500 4x4 dump truck, Kaufman 35’ tandem 19 ton trailer, Deere CX-15, Pottinger Hay mowers
sea2summit
Elite Member
That's the whole point. A little hazing is required IMHO to build cohesion, no one should get hurt other than feelings from time to time but it brings the team/unit closer together.We ALL had a good laugh as he became part of the family.
Boy, can't get much farther off topic than that!