10 Hours In, found this laying in front of my bucket (see pic)

[Egon]

it's an adjustable open end wrench. Crescent is only a brand name....lol

Spanner!

 

[repete]

I know this is taking this post WAY off topic but one of the funniest things we used to do was on the rookies first night we would quietly sneak out to the apparatus bay and manually lift the bay door. Since we kept the fire engines plugged into air we could always release the brakes and roll the engine out the door with the sloped apparatus bay. Once outside we would quietly close the door, start the engine and drive around back. We would go back into the station and hit the house bells and wake the new guy up. He would tear out to the engine for his first run at night and dang if he didn't miss the engine....
We ALL had a good laugh as he became part of the family.

 

[bigcummins03]

It happens a lot.
Get used to it. Lol

It’s all good here can’t crack this nut

 

[Oz_Kioti]

Ever use a “Band-Aid” before”
”Kleen-Ex”?
“Crescent wrench” is a perfectly fine name for an adjustable or open end wrench….we use it around here all the time.

In this part of the world, they're commonly just called a "shifter".

Then again, we call a "torch" what you guys call a flashlight.

 

[jyoutz]

Many tractors have loops on the 3ph lift arms to store spare lynch pins. Check to see if maybe you just dropped a spare.

 

[jyoutz]

All my Cat 2 implements use those finger-eating Lynch pins. jyoutz - you must have some pretty fancy Lynch pins.

I described it wrong. They are just 1” pins secured by those hair pin clips.
This type of pin without the loop at the end is what my implements came with:

category 2 tractor pins hairpin clips - Google Shopping

www.google.com

 

[5030]

Spanner!

Spanners have fixed jaw openings, aka open end wrench...

 

[Egon]

Spanners have fixed jaw openings, aka open end wrench...

https://en.wikipedia.org/wiki/Wrench

 

[Hay Dude]

https://en.wikipedia.org/wiki/Wrench

Hah!
Looks like ol Egon just put 5030 in his place again!

 

[sea2summit]

We ALL had a good laugh as he became part of the family.

That's the whole point. A little hazing is required IMHO to build cohesion, no one should get hurt other than feelings from time to time but it brings the team/unit closer together.

Boy, can't get much farther off topic than that!