snow

Not for a tractor but. At an auction today, a wide tracked walk behind snow blower with 9 HP, electric start, power steering, forward and reverse that runs sold for $45. I would have had some interest but it would just take up too much room in my garage. I got a set of 4 aluminum...

Has anyone else found covermytractor.com for their tractors? They have a lot of soft cabs, covers, and canopies for different manufacturers and models. They even have things for skid steers, wheel loaders, and excavators. If anyone has any information or feed back on them, I would appreciate it...

We are right at 300" so far this year. I will put up a few pics. The first one is of my house and you can see where my Mini Aussie Barney got up there and walked around a while. We had two storms that were 78" and 59". I run a snow blowing route of 79 driveways. I am hoping it quits soon. Enjoy...

Just out doing more cleanup in my yard. Love the blower on the RTV! I can't believe how it throws snow for only being 26 horsepower! Now that I see how good it works, I took the blower off the B and finally got to use my hydraulic rear blade. And both are so good on fuel. I've filled them once...

Wondering if anyone has a suggestion for viewing with a rear mounted snow blower. b3200 kubota with a soft cab. I have an inside wide angle mirror but it doesn't work that well :( Possibly another version would? But when the wind is blowing along with the blower, it's sometimes a whiteout which...

Just wondering if anyone has an inexpensive easy way to remove accumulated snow after using the tractor blower etc. my uit is in a heated garage and when it snows enough every day to use the unit(s) it melts amd makes a small lake LOL. I've tried a windshield scraper which is somewhat OK but...

This guy used a piece of pipe on the edge of his bucket to skim the surface and not dig up his driveway willy

The place we bought in Oregon got about 10-12" of snow last week. We were up there and were able to drive up the driveway when there was about 8" but then it snowed more over night. A contractor in a 4wd truck got stuck after we left and then the GC brought a skid steer in to clear it. No one...

This week we drove to our place in Oregon. The whole area got a lot of snow, passes were closed for time and had chain controls when open, etc. The GX460 (basically a 4runner with V8 and full time four wheel drive) did great. Packed snow, ice, fresh powder, whatever. I didn't even lock the...

Is the K-Connect blower overpriced? YES. Do I love it? YES!! LOL This thing is a blast to run! It was great with the Boss plow on it, but for me I think this is even better. I've never put ballast, but I had to bring firewood to house, so figured I'd just leave some in the dump box. Will only...

This is something I never thought we'd be posting, but here we are. I've got 6-8" of snow out in the pasture in the Opelousas, LA area, and it's not over yet. We've got at least another couple of hours to go! Anybody got a snow plow they want to sell, cheap??? :ROFLMAO:

I also posted this over on Orange Tractor Talks. For my TBN users, I wanted to share my new snow setup on my L5740. Totally overkill for most snow weather events here in Maryland, but it's "nice to know you can." Luckily we just had a couple decent snow events so I was able to test everything...

How to "best" repair a wallowed out shear pin hole in the auger sleeve? Weld on a new ferrule, then re cross drill?

Inexperienced snow mover here who is dealing with snow in SW VA after two snowless winters in a row. So I'm also rusty. I need advice, ideally from folks who use a snow plow blade with a rubber edge on asphalt. On my Kubota B2601, I have a B2672 front mount on my loader arms with a 5-foot snow...

Didnt think it would work but it does, so far. Have 3 blades I am going to make up brackets for so I can use them on this unit. one is a vee , an atv mini state plow, and an old gravely straight blade that would move dirt too.

I expect most have heard of the snow storm in Upstate NY. I am in the place you read about. My house got 80" in a few days. It was pretty intense. I run a Kubota M6-111 hooked to a Cyclone 92" inverted blower. I hear everyone saying the inverted is no good in deep snow. Maybe it is not the...

So I do not have much experience using a snow plow; bought one a few months ago. Yesterday put it use, learning and getting used to it. Worked reasonably well with the loader in the float mode on our concrete pad and gravel driveway. Equipment - Yanmar 6' front blade with skids on a '23 SA425...

Here in Virginia we are having our 2 x per decade decent snow event. I have a #8 brownstone driveway and I've never been very good at getting the snow off with my JD 1025R. I have a rear blade, which requires constant attention to keep from gouging. I have put PVC on my loader and use it in...

I recently purchased a new place and have a gravel driveway approximately 1/3 mile long. It's not flat but the hills are not too steep either. I used to plow snow at the old place with a rear blade on a Kioti CK35, this driveway is longer and I now have a Yanmar YT3589 cab. I don't expect a...

Can someone tell me if these chains look right on the back wheels

Can someone tell me if this is the right way to put chains on the back wheels I'm new at this .

Yesterday I looked at a 6ft Snowdogg UTV plow that's FS near us. I'd not seen one before and I was rather impressed with its construction. This does have a stainless blade and just the bottom wear edge that trips when you strike something. Its pump, oil tank and valves are in the black box...

Went to pick her up today! Can't wait to try it out! Only got these couple pics because I had to wash it, trailer and truck as soon as I got home to get all that damn road salt off everything, then put it in barn to thaw out. There sure is a LOT of electronics involved in this thing. There are...

First time trying that for me, and I've had near 70 winters with snow. I am impressed! 3 inches of fluff that started small. Temps today got up around 30. Question is, where does the snow go? ;-)

Greetings, Im looking to get a couple pairs of tire chains (front and rear) on my Branson 3515H, mainly for forest logging and snow clearing. Traction on ice and hard bedrock is needed, I dont mind heavier chains to add lower centre of gravity. Anybody can recommend Trygg tire chains? Im...

Just about new. Indoors or under cover. BX2810 K-Connect mounting system BX2816 50" blower. Ready to mount to your BX series tractor. Originally fitted to a BX2380 $4000 location S. Vermont

I plow mostly gravel but some asphalt and at times the tractors wheels lift off the surface. I'm looking at putting schedule 40 3inch diameter pipe along the cutting edge. Anyone else having this problem.. I'm kinda sorry I traded my frame mount plow which never had this problem for this QC...

my father just purchased an mx6000 last year, wants a snow plow with angle. prices are insane like everything else. i have an old western 8' and planned on welding a SSQA to it and putting new cylinders on it. everything i can read online people are back and forth if i should mount it like a...

Hi all, I just bought this snowblower today and I'm hoping someone recognizes it. It's 6' wide. Does anyone know the make and maybe the model so I can find a manual and parts? Also, any good sources for shoes? Its missing them. Many thanks!!

well until last week we have been blessed with unusual warm weather and no snow, today was the second snowstorm in a week, 8 inches fell today 6 inches previous, the wife finds it amusing I clear snow in shorts but the heater is top notch, after doing our yard and driveway of half mile went down...

Snow plowing season started for me on my birthday today, 5 inches of wet snow and soft ground......my favorite kind......not :P

Any recommendations for chains and where to buy them? My tractor is 4wd, should I get chains for the rear, or all 4 tires? I'll be plowing about two miles of single lane gravel road with a 9ft 6-way rear blade. We don't get a ton of snow or ice here (western Colorado @ 6,800ft ASL), but once...

I know this is for tractors but not sure where to post. A fellow has a Cub Cadet tracked self propelled snow blower for sale. I think it said 286t. It starts and runs but barely. The owner thought the gas was old and clogged the carb. Wants $100. Anyone have any ideas...

$5,000.oo cash One front mount Meteor Snow Blower with hydraulic chute rotator complete with mounting harness and transmission, must have a mid PTO to run it. It was bought new for my Kioti CK 27. I used it for 4 winters and found the loader worked better for my application. Comes with a new...

I was doing a pre-season look at the Kubota B2789 snow blower this afternoon. One of the impeller blades was binding on the housing. Pessimistic me, was all in a worry about a bent shaft or impeller (4 blade) I removed the discharge chute thinking to get a pry bar in. But even that top port...

the GR 2707 will work on the GR 2120, contrary to what the dealer told me. The solution to the chute handle is simple, use an eye bolt mounted on the side plastic cowling with a straight bar on the back and front to beef it up. A lot cheaper than the new thrower with the weights on the back...

I currently have a rear mount 72" blower. I use my bucket as oftent as the blower. I have close to three acers that I keep clear, most of it is turf. I'm giving strong consideration to adding a 72" snow pusher. I've not been able to find much info on CRI but I really like the looks of their...

SOLD Winter is coming, so get ready now. After upgrading to a larger unit, I am selling my 74" Blizzard/RAD B74 snow blower attachment. I have used this for the past 10+ years on a Kubota L5740. It's in great shape as you can see from the pictures, and was always stored inside when not in...

I'm going to convert a light duty truck plow to my tractor (JD 3039R) and I want to make sure I understand how to hook up to the tractor's hydraulics. I am going to use a frame mount, and not loader arm mount - I will remove the loader for the winter season. The plow will be a Fisher Minute...

https://www.bxpanded.com/72-snowplow I've got a nice L series snow blade with the Kubota quick hitch mount. But don't have any tractors with the quick hitch. Thinking of options, I came across the bxpanded listing. Wondering, can it possibly work? If it does, that blade would look good...

Backstory: Im wanting to build a 20' wide by 24' deep with bottom of trusses at 14' rv/truck storage cover. No walls, no doors, no siding(for now), just a roof over a gravel floor. We live in an area that gets quite bit of snow. Our Ground snow load is 108 psf, unheated roof snow loaded is 82...

I bought this 6 ft blower a few yers ago , i removed the crank handle for the chute and installed a 12v winch. the blower works great but there's no name tag or label that was on it when i got it and i would like to know who made it. Anybody got any idea or seen one these. any help would be...

Is there a way to get the chain back on the reduction gear and drive gear without having to disassemble the entire thing? The gear's set screws, despite using Locktite, wiggle out and the gear comes loose then off comes the chain. It's very frustrating because it doesn't appear to be an easy...

I broke the shear bolt closest to the fan. Apparently part of the bolt is still in the shaft. I've tried feeling for it with a shorty philips screwdriver to no avail. Can I undo the nuts at the fan and slide the coupling out to reveal the shear bolt hole ? Do the two shear bolt holes in the...

Does anyone know if a Kioti rear mount SB50 will fit a Kubota BX2380

Hi folks, my husband and I bought 25 acres in a snowbelt in Nova Scotia, Canada. Our driveway is gravel, a bit of a switchback up the mountain, 1000ft long and climbs about 100-120ft in elevation. I'll be doing all the snow removal, because I work from home and my husband leaves the house at 4...

I bought a Dalen 2022 rear snow blade and have done some work to get it in shape. Replaced wheel bearings and some paint work. There are 5 two-foot carbide insert wear blades and the middle one is missing some carbide inserts. See picture. They are very expensive and I would probably have to...

Hello! Looking to buy a tractor for a 300 yard(ish) gravel/ dirt driveway w some elevation. Been looking at the Kubota’s in the 25-30 hp range. New tractor owner here. Suggestions please and TY.

I hope that this thread will continue as others perform maintenance or adjustments on their tractor. Century included. My tractor seemed to be struggling with HP lately. The tractor did not roll on a slight incline as it did in the past. It turns out that the brakes were sticking. I pulled the...