new

We're looking for 3-4 members who are interested in receiving a free tractor related product for testing. In exchange for this product we would ask for a product review and feedback within 5 days of receiving the item. If interested, please send me a private message with your name and address...

Here is a little project I just completed. I was wanting something different than my old "standby" 3 point carryall and I settled on this. I started with a used jobox I bought off marketplace and had some 3" channel and other scrap steel laying around. I started cutting, grinding, welding and...

Installed new blades on my Blecavator. I found out that JD5 blades fit perfectly

New welder? You just got into welding? If you don't actually have anything that needs welding - then here are some sample projects. https://packaged-media.redd.it/2e7fllo3pusc1/pb/m2-res_638p.mp4?m=DASHPlaylist.mpd&v=1&e=1712437200&s=110b9fdf3d0d8830a336ff610b7e898cf95fb000#t=0

Started baling today and the hydraulic tensioner will not get tight (bales loose) then it started shooting oil out the gauge. Help!! I can't find the book and my dad passed away in December so I can't ask him.

I need some help diagnosing a recurrent issue with my front final end drive on my MFWD T4.75. The sun (part # 5191412) & planetary gears (5165273) housed in the hub locked up somehow resulting in the planetaries loosing some teeth and the sun gear ground completely smooth. The Hub (87542225) was...

Well, I did it. Gunna try a CF Moto. While the wife and I really enjoy trail riding in the Kubota RTV-X1100C, there's a couple times a year I have friends from out of town come visit and they all have Polaris and Can Am 1000's and the RTV just isn't fast enough for long distance rides with those...

Hi all I just bought a 2016 Branson 2400h 4x4 with the sl00 fel and an MK Martin 60 inch blower. The lady I bought it from didn't post a price in the ad so when I inquired and she said $6k (CDN) I bought it. 324 hours on it. The only thing wrong with it is the rear hydraulic lift arms don't...

.

We have several in my area that are permanent. We go all the time to these, but it is a must do when ever we hear about a new one. These tend to be pop up markets that don't do it every year. We always find something really great, like Lamb sausage sticks, other jerky's, cheeses, local...

Hi All - I just picked up an 1100 hour MF1156 that was run at a golf course for many years and then set out back when new machines arrived, it starts runs and drives but needs a waterpump, fan and radiator. We drove it up on a trailer seems to have plenty of power, shifts and the transmission...

When the conditions are too muddy, but the vegetables need to be harvested

Western KY native always looking for advice from subject matter experts in the field of shadetree and professional mechanics. I have stumbled on this website a few times decided to register to ask questions when needed and maybe answer a few if I can.

I just had a 60X60' metal building put up and Everything is wonderful accept the lousy concrete pour. Aside from having a bunch of cracks everywhere there is a low place in the center of the floor where water will hit the concrete out in my covered side shed and end up piling up on the wall and...

This tractor was stolen between March 24 and March 26 in Crowley, Louisiana. It is a New Holland TC 45 that belongs to my nephew. The plow was also stolen. It was parked in an old shed, and the key was not anywhere near it.

How do you repair a slipping clutch. It's fine on flat ground and doesn't Slip at all but going up a hill and it slows down.?

I'm getting ready to buy either a 5075e or a M4D. Currently own a JD 4052r and a Kubota B2601 so I'm not necessarily loyal to either brand, both dealers are rather close and seem good to work with. I've really looked at both tractors and each has things I like. I've heard a lot of people...

I was a kubota guy my whole life. I currently own a septic business and we use my U-35 mini excavator a lot and love it. I just purchased a 50-acre farm on a foreclosure. Never thought I would be going Kioti but more bang for the $, more features and more power. I am paying cash for my new...

Just took possession of a new Mahindra 2638. Got it equipped with rear remotes, hydraulic top link, rear blade, tire chains, wheel spacers and rear tire ballast. Will put it to work shortly to prepare a site for a new garage workshop. Can’t wait! Now looking for a service manual. Why are...

Hello...new to the forum. I own a 2005 John Deere LX280. Been a great mower for almost 20 years. Has about 700 hours on it. Was looking for a new model that's as close to this model specs as possible (size, hp, deck size, reliability). What are your suggestions? I'm guessing the 300 series...

Well last Fall I was looking for a BX with 54" deck to use as a mowing machine, I already have a BX25D. Unfortunately I found a TZ18DA first with a 60" deck and a great price so I bought it last October. Then, I couldn't keep off of Machinery Pete's website and I found a heck of a deal...I...

The loader jerks really Bad when the oil is hot . I have replaced the pump, loader control valve, relief valve, change filter and oil ,replaced all suction hoses on suction side of pump ,changed the quick couplings and switched the hoses on the lift and replaced the cylinder packing . Installed...

I just got my 2013 Ram 1500 back from the shop 5.7 Hemi. Symptoms were ticking, lack of power, and check engine light. After a week in the shop they finally located a burned valve. The shop had the heads sent off to a local machine shop who repaired the burned valve, not sure the details. I'm...

Hello folks, After giving up on my 314 and sending it on down the line, I am without a mower; this hasn't been a problem, but it'll need to be rectified before we get into Spring. My lawn, if you could call it that, would currently be about an acre on a just under 2 acre property. It barely...

Hello all. Well i was very excited to get my first tractor this weekend(I have only had skidsteers in the past.) Saw a great deal on a RK37 shuttle shift with 240 hours and I jumped on it. Guy said it had no leaks and I didn't notice anything while i was checking it out, but it was in the...

The Brand is Sony. I have a Best Buy and a Crutchfield local to me. I could also just order straight from Sony. I'm trying to think of a reason to buy from one of the stores. The new models come out in a month or so and I don't expect the prices to be better. I have a model in mind that I...

Does anyone have a suggestion on how to prevent the joint rod end from slipping out of the control lever on a LA463FL? I replaced it and it works for a brief time and then slips out, usually when lowering. I left the cover off and observed it and it even will slip out with the bucket lowered...

Hi y'all. Just joined and thought I'd start with a little intro. I recently bought a home sitting on 5 acres (+/-) and with the sale the PO left us a JD 755 Turf & Lawn Utility tractor that "needs a little" work. What I was told is: it needs a battery (currently has no battery at all), the fuel...

Hello guys, I just joined this forum. This is my first post, I didn't see a "General" forum so I chose this one (mods feel free to move if needed). Anyway, I finally bought a Mitsubishi D3250FD that I had been courting for a couple of years. Year is unknown. Yes, it's a Vietnamese rebuild...

After four surgeries in the past three years, I can’t lift or run a shovel anymore. Decided to get a little help!

IF you have a similar building, how accurate were the online or original price quotes? I need another goat barn. I visited another farm where I plan to buy some goats, and they had a large,tube frame steel building. I liked the way it looks and I think something a bit smaller would work very...

I have a L S XU 6168 its a 2019 with 230 hours it has two codes F11 F31 i put two new fuel filters on it still has the codes no throttle lever or pedal however it run great it will move you just cant give it throttle PS were can i get a code reader for this tractor Any help would be...

I would like to have a new 3/4 heavy duty diesel pickup. My 2011 GMC 2500HD has given me excellent service. I have maintained it well, its running fine now, but since it has over 250k miles I am thinking of getting a new one. Now 13 years old, I feel I need to re-start the clock on a new truck...

Black Friday is 8 days away And racks usually go out of stock around this time of year. So we want to give you a chance to cut the line and order your rack before the public. So we've opened up our Early Bird Black Friday sale for TBN Members! ORDER YOURS HERE SAVE 15%!

Solis in USA is new brand, but globally we are exporting tractor to more than 150 countries from India. Solis is the largest tractor exporter from India since last 4 year. we have achieved leadership position in many market in addressable segment like France, Germany, Hungry, Slovenia, Belgium...

We are a company founded out of Petoskey, MI and we are looking into purchasing a Skid Steer at the end of this month to help us service our clients. Any recommendations on attachments that you guys might suggest? Here is our website for reference: Home - Grip N' Rip Tree Removal