john deere 3032e

John Deere 3032E. PTO will run at idle but any other RPM and it shuts off unless you activate the hydraulic circuit.. Eg.. loader control, 3 point. Very strange. Anyone else have similar problem? Thanks.

Yes, a follow here who does actions and brings them home, then sales them has a 2020 John Deere 3032E FS here will 600 some hours. Asking 28K as you see in photos.

My 2016 3032e tractor is showing after I had to change the battery. It will crank after taking the battery cable off and putting it back on resetting the system. Giving it me this code. When u lean off seat it will turn off and not crank. It thinks the PTO is on. Anybody got any answers. Thanks

Had an error message of neutof on a John Deere 3032e. I read some forums where it was suggested to jumper the line and bypass the Neutral Safety Switch to verify it was faulty. I did that but the tractor still would not start. Bought the replacement switch anyway and the tractor fired up...

How does one add cruise to this unit?

I have a 2019 JD 3032e that will not turn over. I used the tractor on a Friday afternoon spreading road base and trying to beat a storm. I put diesel in parked it and left the fuel cap off so I am sure some water got in. I tried to start it the next morning and when I turn the key you can hear...

Can you guys tell me some info about this model? A quick google search doesn’t reveal any GLARING issues, but thought i would ask the experts…. thanks in advance……

My old JD 1050 is causing me fits....time to think about replacing it (new tractor-itis). My local dealer has a 2021 used JD3032 HST with loader at a decent price, less than 50 hours. I haven’t been shopping for a JD and don’t know much about this one. What are your thoughts about this...

M buddy has 3032E, the rear lift is not working crrectly,,it is either all the way up or all the way down,,any ideas what the problem might be or what can we check,,thanks advance

Going tomorrow to look at a used 2015 JD 3032E for my son to use on his property. I currently have a JD 770, and have been happy with it. It has been reliable and trouble free. My question is; Is the 3032 a good tractor, or is this model prone to having issues? Thoughts???? Thanks

I have a 2015 JD 3032E and it, up until now was a dud. Back to the dealers at least 12 times before 500 hours, (700 on it now). It was so bad they extended the warrenty to 5 years and 1000 hours, it's up now. In all those repairs I think, (hope) the bugs are worked out. The problem I am having...

Saw a listing for a 3032e, looks to be about what i need. What is a reasonable number of hours on a tractor like this? I would anticipate my own usage to be fairly light. Just looking for something used since I plan to store outside and can't see the sense in spending over 20k for a new...

I have a 2015 3032E and it is just now out of warranty. I do my own repairs and have done so on my Case 580SE for years. I know that there are many different manuals to select from, $350 down to $25. I would like to keep it around $100 and have enough info to fix any part of it. Thanks in advance.

Hi folks, I just bought a new-ish 3032e from the dealer. This is my second tractor and first JD. The first thing that struck me was the exhaust fumes from the diesel which unfortunately makes me extremely sick. I saw a thread...

First of all, I am new to the forum posting but been a lurker for a number of years. I am a hunter and will be upgrading my tractor this year from a 1950 ford 8n to something new for food plots and I will be utilizing a disc, rototiller and light bucket work around my 60 acre hunting property. I...

The pto on my neighbors 3032E won't engage. My knowledge of these newer tractors is limited. I suggested cheeking fuses,seat switch,pto switch. Does this tractor have a pto speed sensor? Thanks,Jim

Are their any upgraded seats that will fit the 3032e? I have a bad back!

I know that the drawbar on a 3032e has a vertical load capacity of 882 lbs. does anyone know how much I can pull with this drawbar

I know that the drawbar on a 3032e has a vertical load capacity of 882 lbs. does anyone know how much I can pull with this drawbar?

Is this an acceptable deal? 2018 Deere 3032E HST with a pinned 55" rock bucket, pinned pallet forks, turf tires, Rim Guard, and a draw bar for $20,000. I am assuming there is no sales tax for a private purchase. The tractor has 3 hours on it and stored in a heated garage. Will get some...

Looking for something with a hydro transmission to primarily run a 5ft brush cutter and a 6ft finish mower with some grapple work on a front end loader. I grew up on a Deeres and still have my dad's JD 5025 so I'm leaning that way but the Massey guy makes a great pitch. Would love a little feed...

Wow, 54 views and no replies. Please disregard the post below. I found a source for a TSM ($95/CD). Should take about a week to get it. ********************************************************** I have a friend with a JD3032e that is giving him fits. He is not real computer savvy so I offered...

I would like to know where the prv for the 305 loader is so I will be able to adjust it when I get my gauges in

Hello, new member here and hopefully my questions have not already been asked many times. I have a few questions so bear with me. Anyway, I had a 2014 JD 3032e that I bought new to use around my 20 acres property, mostly pasture. I did not use it much and only racked up about 40 hours on it...

I have a 2013 3032e that has performed flawlessly since new (262 hrs.). A few weeks ago it would not start, I found a dead battery. I gave the battery a charge, the tractor started right up, no problem. A few days later I tried to restart the tractor, again a dead battery. I installed a new...

So I have a paid for 08 3032e with a 305 loader, 400 hours, looks showroom. My buddy is selling a 03 4310 with a 420 loader, 437 hours, stored outside so she’s faded and a little, functions perfect. 12/12 Power reverser. Spec wise it's about a 900lb larger machine, has more 3 point lift (not...

My first post! First off, I appreciate all the helpful info on here. I've been reading and doing my homework. We have 17 acres riverfront wooded acres that we want to build a cabin on. We had a dozer come in last winter and clear a road. Probably have him come back down this winter and build...

Hi, just figured I'd give a novice tractor owner's review of the 3032E I just bought a couple months ago. First off I picked up the tractor with FEL, R1 tires, and Frontier 60" rotary cutter for $20299. Probably not the lowest price in the country but certainly the lowest within reasonable...

Alright guys, I thought I had my mind made up to buy this extremely clean 2014 JD 3032E with only 90 hours and still under warranty. The tractor literally looks brand new and the owner has never even used the front bucket. The bucket was removed and doesn't have a single scratch on it. The...

Alright fellas I'm thinking of selling my 2305 and getting a tractor and a zero turn. The tractor will be mainly a firewood tractor that needs to have the lift capacity and height to load my dump trailer. It will also need to pull a cutter in the summer and make some $, 5' is fine. I'm more...

I am frustrated with this technical manual. I have a 610000+ serial 3032e, and the TM127919 manual. The fuel filter info listed in the tech manual is WRONG. It references the old style Tiere 3 (pre 610000 serials) engine setup, with screen filter and secondary filter. The newer ones have a...

My PTO won't spin, I pull the switch and nothing. The light comes on but nothing. I tried to turn it manually and it would not turn.. It seems to be locked up... I have not used it since the fall. The tractor runs great and the FEL works great but it is brush hog time and no PTO. Any help will...

Time for a new tractor. Trying to narrow my choices down lately and have found both a 3032e and a 3320 that are both in great shape. Specifics: 3032e is a 2016 model with 60" rotary cutter, 60" box blade, FEL, 300 hours - $16k asking. Seller seems firm. 3320 is a 2011 model with 60" rotary...

Grapple, third hydraulics, 12 volt outlet, quick hitch, storage basket, and mailbox to store chains.

New to this site but have been lurking researching here for some time. Was planning on getting a Kubota, but ended up with the John Deere 3032e earlier this week, for not much more than a Kubota B2650. Kubota dealer not willing to deal... Never had either before but I can say we put this Deere...

How much should I expect to pay for a 3032e with a fel and 60" cutter?

Hi Everyone, I am new here and have a question would like get your thoughts and suggestions. I have a 2016 JD 3032E with D160 FEL. I am going to add a grapple to the loader. For the 3rd function hydraulics, I will have the WR Long Valve Kit. Now the question is how to identify the power beyond...

Will the 3032E's 25 PTO hp run the MX5? That is the minimum for the cutter. Anybody using this setup?

John Deere 3032e D160 loader third function Hello, I have a JD 3032e and would like to add a third function kit and grapple. Most likley will get both from Everything Attachments. I'm having trouble confirming that the third function valve can be added to my tractor and loader. The 3032e...

I was wondering what everyone thought about trading a 2007 JD 2305 with under 300 hours for a new 2016 3032e. I am looking for a little more tractor but still want to stay small enough to get into the tight spaces my 2305 can. The dealer basically offered me a trade difference of 11,700.00 and...

I have a 3032e that is not engaging the PTO when the switch is engaged. I have replaced the switch, checked the fluid, checked the safety switch under the seat and nothing.I have removed the shredder to eliminate that and can turn the shaft ( not easily) with a wrench. The light on the dash...

Hi all, I'm new to tractors and pricing out my first one... I'm looking at all the major brands, trying to get a sense of comparable models across brands. I'm generally looking in the 25-35HP range, and the JD "families" (1 family, 2 family, 3 family, 4 family) are confusing me. It looks like...

Hello all! Looking at a John Deere 3032e or 3038e. Just the right size and plenty simple. The problem is that all the reviews mention that you cannot take the loader off. Then I found out that the loader is often installed at the dealer level. If the dealer can bolt it on, a person should be...

I have owned my JD 3032E with the Frontier LP1172 land plane for less then a month. I noticed the other day when I turned on the tractor and raised the land plane off the ground it was pulsing. It was going up an inch or so and down an inch or so over and over. It seems to stop eventually but...

I have a 3032e john deere that needs a 22NF 500cca battery where can I find one all I can find is a 390cca

I have a friend that has a 3032e that he bought new. He absolutely loves it, but the bucket droops. The loader raises and holds just fine, but the bucket tilt will not hold position. Has been back to the dealer a few times where they supposedly rebuilt the rams and the loader control valve...

I am considering adding rear hydraulics for snow Blower chute control as well as other attachments , part number BLV10461, dealer tells me 3-4 hr install plus since I'm about an hour away an additional $50 service call plus 2 hrs travel at 80 per hr, so could be a $500 install cost . Just...

Hello all. I have a 3032e. I will be adding a grapple to the loader, so I will be in need of a 3rd function for this. So I am looking for input on how to get this done. I was looking at the Artillian kit for adding this with a diverter valve, but this kit would not directly work as I do not have...

Hello all. I have a 3032e. I will be adding a grapple to the loader, so I will be in need of a 3rd function for this. So I am looking for input on how to get this done. I was looking at the Artillian kit for adding this with a diverter valve, but this kit would not directly work as I do not have...

Hello all, I just joined and am making my first post. I have ordered a John Deere 3032E and a Gator today and would like to see if I got a good deal on the tractor. I paid $13988.00 new out the door including shipping and all. 0% interest for 5 years. I could find only good reviews on this model...

New to TractorByNet - appreciate the insights.. .. and details anyone can offer about hydraulic/transmission oil capacity on the noted John Deere model. The specs in the OM say 12.3 litres (13 q); I've added almost 14 litres and nothing is registering on the dipstick (its not on the garage...

So I've heard an ad on the radio from a local dealership offering a John Deere 3032E with FEL and tiller for $221/month. This sounds like a great deal. When I called the dealer, they were unable to tell me how they arrived at that price, considering everything you build on the JD website comes...

Hello to all. Just purchaced a nice 3032e and am looking at the Wildkat econo grapple. Here is my question....Does the grapple mount to the D160 loader once you remove the bucket? Or am I going to have to fabricate brackets to make it work? Ive seen a few threads about the grapple, just not...

I've got a 3032 about 3 years old with 135 hours. My problem, when I use the hydrostat pedals and release to slow down the hydrostat doesn't immediately respond, rather keeps moving forward for an extended period of time. Reverse is worse, I have to gently push the forward pedal to get the...

I was out brush hogging Saturday and needed to apply the differential lock. I heard a pop when applying it. Kinda like a gear bang maybe. Just did it once and never heard it again. I was kind of turning when I applied it so I don't know if that might have caused it. Never could duplicate the...

Today I was out doing some spring bush hogging with my 3032e and a king kutter 5ft bush hog/brush mower, when suddenly it sounded like there were three gunshots and a looked back to see ALL my hydraulic fluid pouring from the back of the tractor. I cut the engine immediately and jumped off to...

I ordered the JD 3032E maintenance kit from Green part store for $89. I never thought the kit would be cheaper than local parts store Wix filters. But I bought the whole kit including both air filters, oil filter, fuel filter and oil for what the Wix filters alone were going to cost me locally...

Just put on a Winter Cab (Original Tractor Cab) from Green Dealer and have some open areas on floor around seat (Right, left and behind) any ideas to enclose these areas to make cab a little tighter from the cold?

Hi guys. First time poster. I am in the market for my first tractor. I've narrowed my decision to 3 models. The 2032r, 3032e or the 3038e. Looking at the numbers, I can't see the advantage of one over the other. I don't need or expect that I'll ever need a Mid-PTO. And it's unlikely that I'd...

I have JD 3032e tractor that I pull a 6ft. finish mower with. Last time I tried to mow, as soon as I pulled the pto switch, the engine dragged down and stalled. I disconnected pto coupling to the mower and tried with nothing attached. Same result. Checked hydraulic fluid level, ok. Front end...

Trying to add a grapple on my 3032e Deere looks simple to just tee into the lines and have a manual control valve but I am missing something because in order for grapple to work I have to work my 3 point hitch and new manual valve together I'm looking over something just can't figure it out and...

my tractor has a problem starting turn the key the starter does not kick in took it off tested it it was fine check all fuses relays all the safety stuff cleaned all grounds cables it will not kick in im looking for some ideas from some of you thanks

I[ATTACH=C So far it has 21 hours on it and is running strong.

I got a quote for a 2014 JD 3032e w D160 loader (305 loader is 2013 earlier) $18,300 Frontier RC2060 rotary cutter but has all the options slip clutch, chains and solid tire $1,600 Frontier BB2060 box cutter $950 This has all the tier 4 pollution CRA*P on it thanks to the MORON*S & IDIOT*S in...

I'm new to all this, buying my first tractor and am trying to decide on which of these three machines to purchase for a 40 acre mini-farm. Brush-hogging / mowing / bucket use, etc. I think I need help!! They look the same to me but JD is lower in price than the other two.... I see more...

I am new here. I have a john Deere 3032e without hydraulic remotes. I want to use a log splitter 3pt. JD wants $889 for the kit to add remotes. Is there any chance I could do it a little more economically? Thanks Chuck.

Would Diesel from Exxon work in the JD 3032E New Model?

Hello, This is my first post to the forum and I am looking for some advice. I recently bought 6 acres of property and it is all grass. There are some considerable hills to mow. I had the JD dealer come out to look at the property. He mentioned the hills were too much for a zero turn and...

My family operates a small horse farm and have been using a JD 3032E tractor for roughly two or three years with very few incidents. I come to you today for help, advice, and a general hope that you will relieve me of my ignorance regarding this situation. The few issues we have with our 3032E...

I am considering replacing/upgrading my 3032e and am looking to TBN for input. I purchased it new about 2 years ago to use on my 8 acres. Right now, I just have a pole barn and use the tractor to mow with a 5' brush hog. It only has 35 hours on it. I bought it with the intention of using it...

I finally got a good start on my homemade cab for my JD 3032E this week and thought I would share my experience as I got the idea and courage to do it from this site. After my neighbor took delivery of his new Farmall with a cab it gave me a little incentive that I could build one without having...

Hello, I'm new here and just recently purchased a jd 3032e. So far i am very please with the tractor and have had no issues. However, I would like to be able to increase my FEL lifting capacities. I've been having a hard time finding a shim kit for a 3032e. Does anybody know if a shim kit...

New John Deere 3032e only got to use it 2 times so far. 3 hours on it. Ready for spring so I can use it much more.

I got a call from my dealer saying they received a "product improvement notice" from JD on my 2 year old 3032e for a new fuel delivery valve. They are going to pick it up, install the new part, and deliver if for free. I haven't scheduled it yet, but probably will next week. I looked online...

Just inked the deal on a new 2013 3032E, Dealer is asking me if I want a Quick-Coupler for the 3 pt hitch for the implements. I will be getting a brush hog and blade with it. Thoughts on this accessory for $350 ???

Hope someone can give me some suggestions on something I might be missing. I have a 2013 3032e with 30 hours on it. I started it the other day, worked for a short while and shut it off. When I went to start it back up it would not turn over. Tried to jump it off and still response at the...

I just bought a John Deere 3032e. I have a woods bh 6000 backhoe from my old tractor. I was wondering if I could build a sub frame that would work on that John Deere or would I be better off to turn the Backhoe into a trailer or towable deal I can hook up to the 3pt hitch. I understand that the...

Hello everyone. I am in the market for a compact tractor. I have JD, IH and NH dealerships very nearby (4 miles) and have spoke with each of them. The JD dealership has a new 3032e with loader (non-QD) and has quoted me $17.4 for the package. 0% finance...yadda, yadda. They also have a '04...

This is my second post. I parked my perfectly running John Deere on a slight slope when the fuel was low. Tractor running fine when I turned off key. When I attempted to restart I noticed that there was no solenoid click. I was off the machine so I checked to make sure I was in neutral and I...

This past weekend I was able to do some side work with the 3032e. A guy had two black walnut trees he wanted down and in exchange I got the wood - done. While I was there he mentioned that he wanted to eventually remove some old stumps from trees that were cut down about 5 years ago. He...

Which one seems like a better buy? I just need a loader and 3ph. Opinions???

Hello. Quick question. I need to spread 5 tons of lime over 2 acres. What is the best way? Do you think I could pull one of the spreaders that coops rent out? If so, how much lime could it pull too? The coop will not deliver unless I get a semi load. I'd like to find a way to get ag lime. I...

Looks like a green fluid and is dripping very slowly where it is bolted together on left side of axle. I called JD today and they said it isn't in warranty because it is over 2 years. Anyone have a problem with this or any ideas?

How do the 3032E and 3038E tractors cope with moving and loading round bales? The specs look like it could be touch and go. Does anyone use their machines for handling round bales?

I have a new 3032e with loaded tires, 305 fel and a 6' rotary cutter/bush hog. The tractor weighs about 2100 lbs. I would guess the loaded tires add 600 lbs and the 305 fel is around 700 lbs. The TSC brand cutter should be around 700 lbs. That adds up to 4100 lbs or so. I would be happy...

Wondering what you all think. I'm going to load the tires here shortly. I have a small king kutter disc but I'm looking for something heavier duty. Looking at both 3 point and pull. What do you think would be a good disc for this (small) tractor?

Mods, if this post needs moved, please move it to the correct location. About 6 or so months ago, I got an email from TractorbyNet asking me to do a review of the 3032e I purchased in May of 2012. I had spent many hours on this site, read countless threads on tractors, and after visiting a few...

My recent post on the 1026 was loaded with very good comments by all of you. I greatly appreciate it! Having considered all of that......I tried the 1026r at the closest dealer (80 miles) yesterday and tried it in snow. Major dissapointment :( I called my salesman this morning and I think...

Quick question: What is the lift height range of the 3 point linkage on the 3023E and 3038E tractors. I can find capacity, but not lift height. I'm wondering if I can lift a round bale of hay into my trailer, which has a deck height of 500mm. Thanks.

Went out to the property today and found that the light switch had been left on and drained the battery completely. After charging it, the JD 3032e wouldn't kick over. It seems that the starter doesn't want to engage. It clicking sound associated with a dead battery is there but the engine...

One of the shortcomings of the 3032E is the inability to use the PTO to power a log splitter, wood chipper, etc. without having to over-ride the seat switch. Some use a sand bag on the seat, others short out the seat switch with a jumper, or install a micro switch under the seat so that the...

I just wanted to give an update, as some may know I traded in my 2320 after a major problem and purchased my 3032E. It took a little time to get use to the fel control verses the 2320 due to the position of the control but besides that it has worked GREAT, I wish I had done this in the first...

Curious if anyone know what this may be. Childeren went out and hit the switch the other night. Drained the battery. Once the batter was charge the tractor would not start. Noticed that the Hazard lights Digital Hour meter are also dead. Swapped out all the fuses as well as the relays no luck.

Just sold my JD 850 gear and purchased a new Kubota, did some extensive research comparison between the JD and Kubota before making my decision, just wanted to share some of my observations. Actually I checked on NH also, but they were priced way out of the same range as the JD and Kub. I...

I have a quick question for everyone out there, I recently traded my 2320 in on a 3032E I ended up with a deal on a used one with only 34 hours and only 6 months old so part of the deal was for the dealer to go ahead and do the 50 hour service so they did prior to delivery. I have had it for...

I have a JD 30032e and with 38 hours and the tachnometer operates irracticallly. Been going on since about hour 5. Sometimes it works and sometimes it does not. It is under warranty, but if it is a loose wire or something, I would prefer to try to fix it myself before hauling it back to the...

anything I should be aware of, or look out for? I have a 1950 8n for the last ten years. Is the john deere as tough as that old ford?

If I raise the front wheels off the ground with the FEL, and engage the FWD and put it in gear (HST) should the front wheels be powered even if the back wheels are not moving? I suspect my fwd isn't working, but don't know how else to test it. Thanks Steve

Hello all, need a little friendly advise I was looking at getting a new 3032e as a matter fact I was going to go ink the sale on Monday, my dealer called me today and stated that he just had a 3032e come in on trade it is 2011 with only 36 hours on it he said he was willing to give it to me for...

OK, well it looks like I am going pull the trigger and get the 3032E and trade my 2320 due to major damage to the rear and tran.'s my question is that I have had alot of people tell me to get the tires loaded which I am leaning toward but can anyone give me an idea generally how much it would...

Just wondering which deal you guys thought looked better. John Deere 3032E Tractor- 12,359.09 John Deere 305 Loader- 3,496.76 Frontier Grooming Mower- 2,100.00 Frontier 5' Tiller- 2,200.00 Total W/Tax OTD=20,760.00 With my $2250 down Payments=303.00...

Just wondering if you guys think this is a good deal. I think I have decided to move up to a bigger tractor. John Deere 3032E Tractor- 12,359.09 John Deere 305 Loader- 3,496.76 Frontier 6' Grooming Mower- 2,100.00 Frontier 5' Tiller- 2,200.00...

OK, looking for input from others that have had any experince with 3032E, I am currently going to trade my 2320 due to an castrophic accident with the trans.'s Deere is going to cover it but I want to off load it before any other problems, I am going to buy a D130 to cut the grass and have the...

I found this on Craigslist and am not sure if it would fit on a 3032e. Does anyone have any experience mounting a blade to the front of this type of tractor? JD Model 380 Blade

I'm in my third season with my 3032e, coming up on 300 hours. I'm a rookie to modern tractors and bought it new without the benefit of the good advice on this site. My decision was influenced solely by the helpfulness and honesty of the JD dealer I bought it from compared to brief visits to...

i'm starting to think i chose the wrong tractor.my jd won't be in for another week and no money has changed hands.since i found this site and done some reading between the jd and kabota,i'm starting to think the kabota is the better built and stronger tractor.my father-in=law has only jd...

New to posting on the forum, but certainly not new to reading and researching. Recently moved to Wyoming about 6 months back now. Got me a little 10 acre place and needed a CUT to keep the field cut, with an FEL to help keep the snow moved and do odd and end chores around the property. Found a...

K dealer quotes 17.4K plus tax for the L3200 HST JD dealer quotes 17.3K plus tax for the 3032E, but includes Frontier RC2060 rotary cutter These seem to be the going rate. Are there better deals to be had? Which is the better tractor between these 2?

Hey everyone, new member to the site but have been reading on it for a long time. Figured I'm ready to buy so I'd ask the questions now, hopefully I can get some good guidance. We're looking at buying a tractor for about 7 acres of cutting grass and misc stuff around the farm. Mainly the...

Looking at these two tractors. Please give advice on which is a better tractor in the long run and which will have a better resale value say 3-4 years down the road. Have 2+ acres to mow. Main reason wanting a tractor is the land was previously timber that was cut with the stumps pulled up...

All, Just bought a 3032e. Wondering which grapple you all think would be right for me. Got the extra rear hydraulics. I'll be clearering blow down pines, moving rocks, cleaning up logged land( logged 8 years ago). Total I have 116 acres that needs a ton of work. Thanks in advance...

Thanks nirion for posting the details of your deal. I wanted the same thing and got it. I also added the rear hydraulics and the coolant heater for another 875. I thought it was a pretty good deal overall. They have to order the hydraulic kit. I can actually see the dealers lot from my...

I have a 3032e John Deere Tractor that will not hold throttle lever when it is moved to increase RPM. This is an orange lever on the right side of the tractor dash. I have checked the linkage and tightened it. This has not fixed the issue. What maintains the lever in place? Thanks in advance! Ted

Just bought a 3032E and was wondering if anyone has had experience with the Frontier WC1103 wood chipper? I have piles of brush/thin limbs off trees with diameters less than 3 inches. Am seriously considering investing in it but want to make sure it will do the job of chipping into mulch piles...

After researching on this forum and input on a previous thread, I have pretty much decided to with a new 3032e instead of a used 4310. Warranty and 0% played a major factor in this. Here is what I am looking at: Deere 3032e 305 Loader Frontier RB2072 6' rear blade Cruise Drawbar R4 tires $16850...

Just bought a JD3032E & love it except for the fumes. Has anyone seen one modded w/vertical exhaust? Is it any better? This is my 1st tractor. Thank You, Dave

Although I really need a larger tractor, I keep coming back to the 3032E due to price and small size (we have some tight areas between pens that a larger tractor may have some issues getting around). Due to the low weight of the 3032E, I would probably be able to take it more often to my other...

I'm planning on purchasing a tractor very soon (as in I need it yesterday). For my location, based on the dealerships close by, John Deere seems to be my best option, and out of the lineup it appears the 3032e will be the best fit based on value and needs. My only issue is that we have some...

I am looking into getting a newer Deere, as we are planning on building a house this year. It is currently 4 acres (flat in central OH with almost no trees), but could expand to 10 at the same location. Uses include 6' finish mower, moving snow, maintaining 250' gravel driveway, moving...

Hi everybody.I was on the way to work the other day and had to stop in and get gas .While i was filling up a truck had pulled up to the pump next to me and had a 3038e on a trailer.So i asked him how he liked it .He responed that it was not his and it was the company he works for. But he did...

so confused. Been talking to 3 jd dealers and one is pushing the 3005 saying that be honest with me and that the 3032 could not do what I want as the 3005 could such as pick up hay in the rear and then ill be using for grading a road ect etc and that 3005 better for that then 3032. I will also...

I am about to buy my very first tractor - JD 3032E. Just want to make sure it will pull my arena drag....that will be its main purpose. I have a 7ft round arena werks style drag. Should this be enough tractor for the job? Any advise would be greatly appreciated!! :)

I WILL DO MY BEST IN GIVING THESE INSTRUCTIONS AS REQUESTED IN EARLY POST SO BARE WITH ME PLEASE.THE 2 GAUGES I BOUGHT OFF EBAY THEY ARE THE TELEFLEX AMEGA SERIES THE OIL PRESSURE PART NUMBER IS 57903P AND WATER TEMP IS 57904P IF ANY BUDDY WANTS TO USE THESE GAUGES .THEY ARE WATER PROOF AND LENS...

As the title says, I've narrowed my choices down to a John Deere 3032e and Bobcat CT235. Their prices are pretty close with the Bobcat coming in a few hundred dollars less. Both tractors have pin on loaders. I'm looking for advice as to which I should choose. It will be used primarily for snow...

Hello, My local Calgary JD dealer quoted $18,799 + GST for the JD 3032e with 305 loader. Is that reasonable? According to the JD website, the MSRP for this setup is $20,274 + GST. On the surface it looks good but this is my first tractor purchase so I'm not sure how much dealers typically...

I know you can buy a kit for this (about $750):( from John Deere but I was wondering if anyone has done this without buying the kit and just making their own with parts and hoses from supply stores. If so, was it cheaper?

Hi everybody I would like to update my review of my 3032e. My previous post was a while ago. I now have 56 hrs on it and can't complain one bit .It did have to go in for warranty work for a leak from the loader control joy stick unit. The dealer picked up and had back to me next weekend...

Hey guys, I need some opinions on the John Deere 3032E and 3038E tractors. I am considering one of these model tractors. It will be used for brush hogging w/ a 5' mower, boxblading a long drive, and general loader work. I would like a grapple in the future. My main concern with this machine...

I have an electrical problem with my 3032e. Dealer said it was a dash board problem after 4.5 hrs of testing (whatthe heck? it took them 4.5 hrs to test a dash and fuse panel? and charged me $382.5??) Anyone have this problem before??

Hey all, I'm trying to decide what tractor I would like. I have decided between the 3032e and the 2520. It will come with an FEL, and no other attachments at this time. I have 4 acres, small driveway to maintain, large garden and various other things to maintain. I will do my mowing with my...

I all, Just want to say hi to everyone. I am a new 3032e owner with a front end loader. I am very very new to the tractor world so any and all tips would be great. Thanks and I hope to have photos and a video once in awhile. Russ

Called all my local dealers and the best quote was $13,500. No negotiating has started.I think that is still high and am not going to buy unless I can get them under $13,000. What say you? Thanks

First off I would like to say hi to everybody this is my first post but have been reading forum for the last couple months. Well I pulled the plug on a 2011 john Deere 3032e with fel and pallet forks, rimgaurd ballast box and it was delivered on June 25.Before I decided on the 3032e I check out...

I know this has been discussed over and over, but obviously my 'search' skills are wanting and I can't find any of the discussions. I remember reading here of someone who had loaded the rear tires of his tractor by syphoning from a barrel into the tire, using a special valve that one would...

Hello to all, I've done quite a few searches here but still having some trouble making a decision so I decided to post another comparison like everyone else...:laughing: I own 60 acres of woods and field. Field is rented to a farmer. My wife and I want a reliable compact tractor to do bushog...

Noticed today a film of oil on the 'canister' on the left side of the tractor directly behind the FWD controls. The canister (looks like a spin on oil filter, but is painted black with no part numbers or logo) seems to be bolted to the xmission with a single line leading to or from the oil...

Hi everyone great information here, it's been very helpful. Looking for any feedback you might be kind enough to offer. I'm sold on Deere because the dealer is close and has been pretty helpful so far, I don't like the pedals on the Bota's, and my wife loves JD because her Grandpa did. I'm also...

My SIL is considering a bid he got for a new 3032 tractor with r4 tires. It has a 305 Loader, Engine Block heater($73), 3rd function Hydraulics($749.), Draw Bar ($132.). Dealers price is $16,965. plus tax. The dealers quote shows about a $2100 discount. I'm thinking if he can get a...

My SIL is considering a bid he got for a new 3032 tractor with r4 tires. It has a 305 Loader, Engine Block heater($73), 3rd function Hydraulics($749.), Draw Bar ($132.). Dealers price is $16,965. plus tax. The dealers quote shows "about" a $2100 discount (I say "about" as he has a box...

Do you think a 3032E would be able to pull a 2bt 14" plow. Got a opprotunity to get one very reasonable, but would like to know if you all think the tractor can pull it ok..Not to much clay in soil where Im at...Thanks

hi, When I 1st got my 3032E last fall I checked out all the knobs and levers to make sure they worked and to learn what they did. I remember tightening, by hand, the drop/lock valve to slow down the descent of the back blade. Now I can't budge the knob without getting a good grip with a pair...

getting ready to order my new 3032e.have 16 acre mini farm.Am I making good choice.

Need some advice Need some advice...Im replacing the trusty 8n with the following attatchements..6' box blade, and 5' brush hog..Most of the work would be the usual front loader work ,brush hogging, and garden tilling and some plowing for new garden spots...No need for a mower have a ztr for...

Some background about me. I am a guy that does most of the repairs on my cars, truck, home, guns, bows, boat, bikes, etc. on my own. With that said, I'm also an attorney/CPA in the middle of busy season. We ended up getting a really good deal on a foreclosed house in early January, moved in...

I just bought a new 3032E and have put about 10 hours of moderate dirt work and bush hogging on it. I noticed that the bucket has a little "slop" in it. Like when i'm going over rough terrain with an empty bucket it tends to move an inch or two back and forth. Is this normal? The bucket works...

Did anyone that purchased a L2800 or L3200 consider a John Deere 3032E? I'm finding the John Deere to be $1000+ less, which I did not expect. Do you think the 3032E is a comparable model to the L3200? I would be getting a FEL with the tractor.

I am looking into a rock bucket for the 3032E with 305 loader. Do you think the 66 inch John Deere rock bucket is too large for this loader? Do you know of options for a smaller rock bucket, something with less depth around 4 - 5 foot? I can find smaller rock buckets but they require a skid...

I just bought a brand new John Deere 3032E diesel and noticed there are pink spots in various locations on the snow where I have run the tractor. I just got it back from the shop and they said they couldn't find a diesel leak. Believe the hydrolic fluid is a different color so ruled that out...

Hi All, Can anyone give me the scoop on these two tractors Walter

Here is the best cab option I have been able to find for the 3032e & 3038e. It looks pretty good but it is expensive (well over 3 Grand US). I thought I would post this up here in case anyone would be interested. The following are detailed pdf files of the sales flyer and installation...

I have found two tractors that are very similair and the price is only $500 for the 3120. They are both still under warranty wiith between 250-300 hours on each. They are both 4wd, R4 tires, hydro trans with FEL loaders. The 3120 has a 300X loader and the 3032E has a 305 loader. I am not what...

This model JD3032E with loader , and NOTHING ELSE is being sold off by JD Australia due to a dead market here. The price is good , trust me on this ( dollar equiv thesedays , by the way .. ). They have several of them . No one wants loaders here tbh , so it's added as a no option ( get rid of it...

trying to decide between a 3032e and a 3038e price difference is around a $1000.00 more hp is nice but not having a turbo (3032e) is also a good thing. How is the torque on both of the tractors what are the real world differances Randy

I'm a new owner of a JD 3032E with a couple of questions. I could find nothing in the owner's manual or the archives of TBN about them. This is my 1st tractor with HST. When I let off the go pedal, either forward or reverse, it feels like brakes are applied. This is more than just engine...

I have about 15 acres to bushhog on some pretty steep ground. I also have a few projects in mind for a FEL like clearing saplings, brush, and light landscaping. I have done quite a bit of comparative shopping for about a year and would like your opinion on the models comparison above. I'm just a...

I am looking at the john deere 3032e and the 3038e tractors Also thinking about the bobcat ct235. My questions about the john deeres are how much to get the cruise control and can you set any speed with it or just full speed for the range you are in? how usable is the two range hydro drive...

On the 3032e... Does cruise control work in reverse.?? Does the 3032e come with the knob valve that adjusts how quickly the 3pt. hitch drops.?? Both of these questions would be the game changer for me to consider buying this machine. Thanks.

We are looking to buy a tractor for our horse property (5 acres). We are considering the John Deere 3032e or the Kubota B3300. They are very similar in price (the John Deere is actually several hundred cheaper). We will be using it mostly to mow pasture, move dirt for stalls, and using an...

For some reason I've been on a roll with expanded metal lately. I like to carry around two or three lengths of 5/16" chain for all-purpose use, but lacked a convenient way to carry them. Since there are some unused cast bosses with 3/8"-16 tapped holes on the 305 loader's right side mast, I...

Compared to most of the projects on here this one is pretty insignificant, but I'll post photos anyway. My new little JD came with a decent grille guard frame as standard equipment but the first time I handled brush with it I knew it was too open to do much good against sticks and brush poking...

My tractor has started stalling after it get's warm. Cold it runs good for about 1 to 2 hours. It always restarts and will run for a short while before doing it again. I changed fuel and both air filters. Has to be something silly; thanks for any help

Took the new 3032E down and had the rear tires loaded today. I had them use a weaker than normal solution of calcium chloride--25 pounds of cc in each tire mixed with 35 gallons of water (no ultra-cold winters in my part of the country, and besides, I keep this tractor inside). I later decided...

Have been checking out these models and can't figure out a couple of options on them... hoping someone can help: 1. I believe they're identical in size, including tire dimensions. Correct? 2. Can you get power beyond? i.e. to run a log splitter? 3. The brochure states it can take a front...

I am currently comparing the John Deere 3032e to a Kubota B3300SU. Test drove the Kubota today and really liked it. Both are within a dollar of each other as priced. A Deere dealer is five miles away, and the Kubota dealer is about fifty, but close to my work. Both seem like nice machines, but I...

I am having a real hard time picking a tractor. I want a tractor, loader and backhoe for now. Possibly a tiller, rotary cutter and chipper down the road. I have a some lot clearing to do so I am a little concerned about the ground clearance on the 2305 though it seems like a sweet tractor...

I need some input...I am buying a tractor to do four main things: 1) finish mow my 2 acre yard 2) plow snow 3) plant food plots 4) landscape I like the higher HP of the 3032E but there is no belly PTO for a mower. The 2520 is considerably smaller but looks to be more versatile. The 305...

Hi everyone, I've been monitoring the forums here for a couple months while I've been going through my tractor search. Now I'm finally nearing a decision and I decided to post to get your opinions. Here are my options. These are all cash (or higher finance rate) prices: 1) MF 1529-- FEL...

I am going to buy a new tractor in the next day or so. My research came down to two models the 3032E or 3038E. Both are very similar. --- Same Weight, same loader lift capacity, same transmission. Just: Why is the 3038E stronger with a SMALLER engine (1.5L) than the 3032E with 1.64L while both...

I had this built for about 60.00 total.$30.00 for the welding & rest on parts. This is just a readily avalible bumber hitch you can get for 20-30 off e-bay & I bought this one new used for 12 I think. sourced chain hooks off e-bay & tow hooks from local auto parts store for cheap. Unit also uses...

Hi all, new member here. I'm looking at a new 3032E and was wondering if you could help me with pricing. 3032E Loader 5' rotary cutter with slip clutch 5' box blade I've been quoted $16,898 delivered. How does that sound? Thanks in advance

My local JD dealer is about $800.00 installed for the part# LVB25743 Rear Hydraulic Kit. Has anyone else priced this unit out.? Maybe 800.00 is fair, but really would like to hear what people have actually paid for this unit. I intend to also run lines for grapple if wanted. Joe

When I recently negotiated the deal on 3032e the dealer offered to throw in filters and fluids needed for the 50-hour service. I'm only at 8 hours but needed to go by the dealer for something else yesterday so I thought I'd pick up the 50-hr. parts while there. When we looked up what was...

This is my new compact JD 3032E with Ratchet Rake and a Box Blade. I tried to clear some of the land on my property with the Box Blade but just could not make much headway so I followed your thread on the Ratchet Rake and man am I glad I did! It works great with about 32 hp tractor! Here are a...

I've got a new JD 3032e with an FEL, 25 PTO HP, and dual rear hydraulics and am looking for recommendations on how best to use my Cat 1 3PH. Here's what I anticipate I may be doing with it: - Grading/crowning my gravel driveway (I've got a single blade on loan from the dealer now that I'm...

Ok I'm new here and am in need of some advise from ya'll out here. I'm looking @ buying either the Deere 3032e or the Kubota 7800 . Which would fit the bill better? At the same time plan on buying a PTO wood chipper , Brush Hog and furrow plow for simple gardening chores. Both brands have great...

Just had my new 3032E tractor delivered and absolutely love the machine. Easy to use and enough power to handle on job on my 4 acres of land. My dealer said to change oil at 24 hours despite what the manual says. What are some of you other 3032E owners doing? How long before initial oil...

I traded a 2305 for a 3032a and wow what a difference. Its more stable, sounds like a tractor, and tractor handles the bush hog not the other way around. This tractor is well built and very strong. The next implement will be a set of forks soon. The only negative thing is the diff. pops in...

Looked at a 3032e with loader for 15500 plus tax, can you add a 3rd remove valve on the unit. Local dealer said no but JD own web site show attachment that need that extra valve? Thanks KC

First off what a great site and informative group of people thanks for being so welcoming. No sucking up intended but I have gained a lot of information here and now need some more specific opinions(facts are welcome as well). I am buying a new tractor in about a week and keep going back and...

Well I picked it up yesterday from the dealer $15,400 I also bought a JD tooth bar for $389. This is the only piece of new equipment I have ever bought personally in my life! Do you think my price was okay? Today I am going to buy a finish mower, brush hog, tiller & box blade. What is your...

Pulled the trigger on a 3032e. With my 2305 as trade, $20,300 is the total cost. I owed $10,200 on the 2305 after 1 1/2 years of use. I'm taking a hit but now I don't have to worry about that darn trans fan on the drive shaft breaking.

with 60hrs now on my 3032E & not realy convinces the loader could take actual work, I am now convinced the tractor & loader are much tough. The loader suprises me.I think it is more in design of the loader than heavy steel which it does not have, but the strapping of loader from the front lower...

JD 3032e is here! Took delivery yesterday. Here are a couple pics. Used it yesterday to pull hay wagon. I really like it so far. The kids were just as excited as I was! My little guy had a JD40 before I got mine given to him by his great-grandfather.

Hello guys, I was quoted $12,200 on a 3005 and $13,200 on 3032E, no FEL, and $16,400 on 3032E with the loader? I need to know what type of pricing i should be looking to get on these here in NC? Also, the 3038E was $13,975 w/o loader and $17,175 with it. any information or...

Well, pulled the trigger on a new JD 3032E today. Been looking at everything and the Deere just felt right. Got the R1 ag tires filled with Rimguard, FEL w/pin on bucket, pin on forks, cruise control. Some things that influenced my decision were dealer location, attitude and parts...

I have a dealer in my area that has the JD 3032E with Fel, RFM, and trailer for $18750, please let me know what you think. I'm new and coming closer and closer to my tractor NEED and purchase. Thanks to all my TBN Friends.:confused:

i hope some owners of this tractor are viewing tonight...my friend/neighbor is looking for a compact tractor and he wants to do a 2000 series. something 25 or so hp...I don`t like them as well as the 3032e for example. better step to access floorboard besides the floorboard is flatter on the...

I was looking at the John Deere 3032E tractor with a loader. I will be using it to maintain our 5 acre lot, mowing, dragging driveway, garden ets. The price seemed very reasonable @ $15,590. Does anyone have any info, good and bad, about the 3032E? Thanks

Along with other models of tractors, the 3032E is one I have been looking hard at. The only thing that bothers me about this machine is the loader is a non-removable type. The bucket itself is removable. Do you think this would cause problems down the line by adding wear to the front axle...