Search results

Almost a year now, since I put the correct oil in the reservoir, no leaks not even a wet spot.

Thank you for your reply however, when I purchased my sprayer it was with a kit to be installed on a John Deere 318. This is the information that I am looking for.

I would like any Information on how to install a MO25GAO60045 sprayer on a John Deere 318

Thanks to everyone for your helpful feedback, I have considered all comments. I originally purchased this sprayer for my John Deere 318 which I stop using a few years ago. After reviewing all comments, I have decided to revisit my old 318 and her up and running again this summer. Again thanks...

It’s a 25 gallon sprayer.

Can I install this sprayer on my z425 zero turn?

Can I install this sprayer on my John Deere Z425 zero turn mower?

All said and done, running like new, no leaks and it’s splitting wood like a champ. I going to give’er a fluid change soon as I get some from Walmart tomorrow.

Absolutely, although I will be using a 90 degree iron street elbow as soon as the paint dries.

Thank you, thank you very much. I’m sure the street elbow will do the job for me as well. I will convert mine as soon as the weather clears up a bit. I am considering an hydraulic oil fluid and filter change also. What type fluid do you use, I will be using dexron transmission fluid.

What type of elbow pipe hose fitting, that you are using on your fluid return line?

Hydraulic pipe fittings versus water pipe fittings, are they interchangeable?

New updated handle and linkage to match the new version control valve and now everything is working perfectly. My thanks to all for their time, patience and suggestions on how to solve my problem. Best regards Melvin.

Good morning, the hydraulic connection have been corrected. The problem now is with the control lever. I am getting a new lever and linkage today. I will keep everyone posted on the new linkage install.

I tried to mount the handle differently to no avail. At any rate, tomorrow I am going to try a new handle. I will keep you guys posted.

The reason I wanted to upload a video was to show how the control handle made contact with the valve body which would not allow me to apply the pressure cycle. Please look at my finger pointing.

I’m trying to figure, how to post a video of what I am talking about.

Yes sir the ram directions are correct now removing and replacing the valve like the valve on your Duerr splitter. My problem now is; the old valve handle may have wrong shape to complete the cycle.

Exactly! Yes sir!

Old valve.

Hoses to ram are solid metal lines which cannot be reversed. This describes my problem. It is raining today therefor, I will try to take pictures and post them tomorrow. This cause me to wonder if the valves have internal adjustments to change fluid flow to the ram depending on the splitter...

I installed a new control valve on my 20 ton MTD log splitter. My problem is; the piston retracts when it should apply pressure to split wood. Is there a method/adjustment to reverse the piston’s direction when the control valve is activated?

I don't know the length of the MIU14391, Z255's engine oil drain hose. However, the Briggs and Stratton oil drain hose #1723165SM is the one I uploaded in my post. I have decided to try a three-inch 3/8" iron pipe to the oil drain opening on the engine to extend my Brigg's 1723165SM hose to make...

Hi guys, I bought the John Deere OEM easy change conversion kit and the conversion kit's oil drainpipe is way too short to clear the Z365R's Chassie. Therefore, I purchased the Briggs and Stratton's engine drain hose, which is much longer than the easy change conversion's drainpipe but, still...

Thanks everyone, just the information I was looking for.

Thank you, I have seen this video. The conversion seems easy enough but, this conversion is done on a lawn "tractor" not a "zero turn". I am aware that the engines are the same, the conversion kit will be the same, the procedure will be the same. My concern is after the conversion the ability to...

Anyone ever installed the new John Deere OEM easy change conversion kit on the new John Deere Z365r?

I suppose things fixed itself when the owner/operator wised up and put the correct oil in the reservoir.

Anyone using the imatch chain box?

Well gentlemen, I think my leakage problem have been solved. I was topping my reservoir off with the wrong weight oil, I was using AW-10 Hydraulic fluid. The more 10 weight Hydraulic fluid I added to my reservoir the more the leak increased. Once I started using the correct weight oil 20-50W...

I have a John Deere Z425B M0Z425B013384, Zero turn with one of the four Hydraulic pipe fittings leaking on the TUFF TORQ BY KANZAKI MODEL DUP 10E. There are four pipe lines going into this unit and one fitting is leaking. I cannot get any of my 15/16 open end wrenches on the nut to try and...

I have a L3301 Kubota with a DPF exhaust filter. It is recommended not to idle the engine. My question is; how long do you warm up the engine on the L3301 and what rpm? :confused:

The Snow blade on my Kubota L3301, angle side to side speed is excessively fast. What kind of hydraulic flow restrictors do I need to slow the blade angle cylinder down? The blade angles at warp speed.:confused2:

I have a L3301 with a L525 FEL. I am interested in how everyone's hose connectors are mounted. The four hoses connectors on my tractor have, all four male fitting mounted to the tractor, and the female connectors go with the loader. Is this the normal hose rigging? :confused:

I have a Simplicity Champion Zero turn with a 18 hp. Kohler that is a no start. I have rebuilt the starter, replaced the solenoid but the starter will not turn over. As of now, I do not have 12v. to the starter. Does anyone have a starter/switch circuit diagram, so I can trouble shoot the...

I have a King Kutter landscaping rake and Countyline back blade. Is there a way to lubricate the swivel on these implements? :confused:

I have a three point hitch "countyline" rear blade and a "king Kutter" three point hitch landscaping rake. I would like to know how do you grease the swivel for the blade and rake? :confused:

I recently purchased Ford 101 10-419 plow. What can you tell me about it and where can I get parts and a manual? what is the size of this plow and can I taylor it to fit my John Deere M? I already have a three point hitch on the M. I am sure the plow is to large for my M as it came with three...