Search results

$89 for monitor and two cams (one up front and one for the rear). Amazon.com: HD 72P Backup Camera and 7" Monitor Kit, 2 Cameras for School Bus/Trailer/RV/Truck/Pick up/Van Rear View Camera Single Power System IP68 Waterproof Night Vision Driving/Reversing Use: Car Electronics

I installed two waterproof switches I bought online. I had to make a new mount plate (black acrylic from Amazon) because I couldn't find anything to fit the existing holes that WERE waterproof. I have installed two light pods below (I don't have a pic of those, but will try to add tonight) that...

I run one of these nozzles with a 3gpm flowjet pump. Have a manifold that allows agitation back into the tank as needed. Covers around 16-18ft.... nozzle https://www.northerntool.com/shop/tools/product_200326933_200326933 manifold... Fimco Quick Release Manifold Kit 7771967

:welcome: to TBN and welcome to the pack!

I use this little coleman with my pole saw strapped to pallet forks. I have a wireless remote on/off from amazon to turn it on. If you look closely, you can see the box plugged into the outlet. cost me $11. It's went up a little in price, but works nonetheless...

Thought I'd update after adjusting my rear roller height and top link again, I was able to get a great cut first time through AND was able to pick up ground speed with my farmer's helper. Here's a few pics field mowing tall grass mixed with foxtail and lespedeza. Some of the areas were just over...

Mine ain't a 'bota but this one is 1/8" plate :) I've smacked it with a couple good ones at least 4" in diameter and held up fine.

No, its not lazy. I couldn't see my pallet fork tips when they are right off the ground and level. I can now. I can also swivel my rear one and keep an eye on haybine and baler without breaking my neck all day! Last week I used the rear one to watch my flail mower while trimming the side ditch...

I made this one from a pickle barrel. Dropped in (10-1/2) 80lb. bags. At an estimate of 86 lbs/bag cured + the barrel, stabilizer, and other pieces, I think its around 930lbs. I dropped in a couple pvc pipes for tool storage if needed, and didn't pour all the way to the top. I store chains in...

I'll add to the discussion that I have the std duty FH-EF175. Mainly wanted a backup for my 54" mower if it dies and to trim back pastures after grazing and couple fields that get bush hogged 3 times a year. I'll have to say initially I wasn't impressed with mowing quality with the Y knives. I...

60" twin lid from MTL. Best attachment purchase so far.

You mean THIS Remington saw? I used (3) 5" hose clamps from TS to pin it to my forks. I use a little suitcase genny I picked up off CL for $75 and a wireless remote on/off switch from Amazon for $11 to turn it on and off. I also have a gas pole saw I can use from work platform for greater reach...

This is from the titan site. I only say this because my BETSTCO had the same assembly and I had no trouble assembling the way I described. I wondered if that issue stressed the folds, especially if there was any side to side movement (ie. smacked side of a tree, etc).

60 gallon pickle barrel, 10-1/2 80lb bags of quikcrete (est total ~950lbs). The top and lowers are interconnected, of course. Room for a couple tools with lid off or log chain under the lid.

Contrary to what others here say, yes, you can-but only with the right rotary cutter. Will the output be as plentiful as a sickle type or disc/drum- no. In fact you'll have some waste due to what you run over with the tractor that will not get cut. Doesn't sound like much until you do the...

Same here Spudman on the 60". I like that I can still get in the woods in a lot more narrow spots to pick up logs and debris. I've learned (and taught my wifey) that piling trimmed branches and logs is as much an art form as picking them up without leaving scraps behind. :)

I have the exact same set from Titan and really like them. Purchased from Titan's ebay store with coupon for ~$420 if I recall correctly. I also added a set of lower lift pins and a top link so I could use them on the rear. Pic is before I drilled the top link hole.

So I had a good friend give me this older water tank/sprayer setup that was mounted to decrepit 3 pt carry all frame. Said it needed some welding/repair, but I had other ideas. Eventually settled on pallet mounting the tank and saddle with new ball valve, filter, pump, and boominator nozzle...

... "You'll shoot you're eye out!" bwahahahaha! :laughing:

Not the baby phone mount, but bigger brother with some extra mounting plates laying around at work......

For Visa at least, that's not legal depending on your state.......

I get all of these in map below, and my strongest are NBC on Sauratown Mt and FOX, CBS out of Roanoke. I have my antenna pointed to the SSE towers for WGHP(FOX) and WFMY(CBS) down off 220 (no rotor, its fixed). So I'm getting a stronger signal from Roanoke off the back side of the antenna. :eek...

Nope, it specifically says 'in the app' right on the coupon. I've tried before and it will not subtract from the total if you use the regular website.

If you order it from their ebay store, you can use this for $100 off. But act fast ends 7pm PST, and you have to use the ebay app on your phone or tablet. This is how I got mine delivered for $925. :dance1:

Today only until 7pm PST. Looks like you have to use the eBay app on your phone or tablet. 15% off, Max $100.

:welcome: to TBN and welcome to the pack!!

Nice cart. But this is ahead of you on the list as the 'ultimate' tractor attachment. LOL. :2cents:

Just got this in email. Thought I'd share for anyone interested. Today only, 15% off max $100. Expires 6pm PST 9pm EST.

Expanded sheet or perforated sheet are readily available for DIY. Or if you know any fabricators, you can get 1/8" sheet CNC any style/shape you wish. I chose the latter......

Wanted to share my latest mod on my NX5510- grill guard insert. Was cut from 1/8" sheet, 3/4" holes. Just didn't like the look of expanded sheet, and costs were similar to buying perf. steel. Before and after pictures attached.

That math seems fuzzy..... Is this your loader or a different one? Numbers look almost identical to my KL6010.

So I ended up ordering a couple of NTE waterproof switches that I've used before on my ATV pod. They can be had on Amazon here. https://www.amazon.com/gp/aw/d/B007Z7OC0K/ref=sxts_1?ie=UTF8&qid=1541367260&sr=1&pi=AC_SX220_SY317_FMwebp_QL65 They wouldn't fit the opening, so I used a piece of...

Welcome fellow N Carolinian and welcome to the pack!

:welcome: to TBN, and welcome to the pack!

Welcome to the pack!

Already been through this for our ENTIRE dry lot the horses are in. Get most if not all the mud OUT. Either cow carpet or underlayment, then sandrock or pea gravel depending on what you can get for your area. Underlayment here 12x400' runs about $400 plus $30 box staples. Tried it a few...

Anyone know what size/brand rocker switch it takes for the right rear fender mount on the NX tractors? I'm adding a rear 'hookup' light for obvious reasons. :D

T5 blend is $15.97 BEFORE $5/gal rebate. T6 is $19.97 BEFORE $7/gal rebate both on Amazon. Either product is a win, with up to 4 rebates per person/household through 12/31.

Welcome to the pack! ... and TBN!

Thought I'd share my pickle barrel ballast I made yesterday. I know there's been many posts about these. I like this one in particular since its plastic, tall and narrow. Took 10-3/4 80lb bags to fill. I can store chains in the top and the lid still seals.

Home, safe and sound! Ready for 1st project - 55 gal Pickle barrel ballast :licking:

Hello Guys, In the market and been shopping for nx5510 w/ cab in shuttle and hydro. Not sure what the markup is on these now and would like opinions. Got 2 quotes for 2018 nx5510HC w/ FEL, 2 rear remotes, rear wiper, and rear mirror. $34,992 (really remote from me) and $35,600 (local with...