Search results

I did not buy the gearbox OEM. I got it from Messicks. It sits on the deck flat. I should say, Messicks is a Bush Hog dealer and they sent me the gearbox I ordered. It is obviously a Chinese product, but that may be OEM at this point.

I have an RDTH72 rear finish mower that I replaced the gearbox on last summer. The belt is jumping off one of the blade spindles. I have no idea how long I run it in that condition, because I don't realize it's off until I smell the rubber burning. I have no frozen pulleys. They all turn with...

I don't know if it's the exact same model, but I tried one several years ago that looked just like the one linked in the O.P. It was OK for a general reference, but did not give reliable, repeatable results. To get anything close to repeatable, you had to have the bucket at the EXACT same height...

Thanks all! Looks like my tank is going for a ride!

I have an older steel diesel tranfer tank. About 100 gallons. I have some serious scale and rust issues going on inside, to the point where the filter clogs pretty fast. Is there a simple / low-cost way to clean this tank out, or is it trash? I really hate to have to replace it if I don't have to.

I would prefer to not mow with my FEL attached, but I do it for the additional weight. I usually take a scoop of gravel from the driveway to help. That being said, I always keep it low to the ground unless changes in elevation or other obstacles require me to temporarily raise the bucket to...

I found about 3 gallons of Rotella T 15W-40 in my barn this weekend. Unopened, but at least 6 years old. Use it or recycle?

It's a contest between the traction of your tractor and the pull of what you're dragging. the only way to find the winner is to push it and bend the cylinder.

I read that BMW was doing this on a trial basis in Europe. I believe heated seats only, right now. I have an On-Star subscription for my GMC that allows remote start via my cell phone. If I cancel, I lose that feature via cell, but still have the function on the key fob. I don't know if that's...

Congrats! I know it doesn't seem like much, but I would fill the fronts, too. Can't have too much ground hugging weight!

NH Number: 86401271

I have looked around and seen virtually no posts on the 2019/2020 Line of Bobcat compact tractors. I have a decent local dealer, and pricing (compared to Deere, Kubota, & New Holland) is very good. I would like to stay with New Holland, but their dealer situation in my area is weak. Has anyone...

I have a 1026R that was new to me last year. I was able to attach and disconnect the deck then with no problem. Now I cannot get the arms to drop down to connect to the bar that hangs the mower. It is hydraulic lift. I have connected the appropriate hose to the hydraulic line. The arms behave as...

I'm seriously considering parting ways with my 2002 TC35D with about 375 hrs. It has been a great tractor with a few known quirks, but the dealer around here is no longer a New Holland dealer. I have been looking at either the Kubota L3901 or Deere 3038E. I have to say that neither one of these...

About a year I took my 2002 TC35D to a local Kubota dealer to have some minor work done. The nearest NH dealer is over an hour away, and I figured they could handle it. For the most part, they did. Except that the ignition switch failed while in their possession, so they installed a Kubota...

TC35 Body Fastener Repair The TC35 (and other models of the same class) uses a number of Nuts captured in the plastic / fiberglass panels for attaching the panels. Mostly 8mm Thread. Over the years, through multiple removal and replacement, several of these nuts have spun in the panel, making...

I have a NH TC35D with under 300 hours. Over the years it has not been uncommon to get on the tractor and find that a mouse has lunched on a wire or two. I would trace it down and splice in a piece. This time it's different. There was a major party on my wiring harness and it is SHREDDED. I...

Hey guys- I was mowing the other day for a couple of hours when I noticed that the temp gauge on my TC21D was at the top. I have no idea how long it was like that. I pulled the screen in front of the radiator and blew it out. The temp came down right away. But I saw that the temp started...

I have a NH TC-35D (Not relevant, but I know you guys like to know), and have installed a quick hitch on the 3 pt arms. It is NOT the PAT'S EASY CHANGE. I got it at Tractor Supply, but can't remember what they called it. The issue is this: My Land Pride Box Blade normally attaches by the arms...

Greetings- I have a TC35D with HST and about 215 hours (insert cracks about driving in parades, etc here :)). I can't engage the PTO. It was a little stiff in and out the last time I used it, just a couple of days ago, but now the lever won't budge. The linkage to the gear box appears to be...

My TC-35D is not registering any temperature on the panel guage. I went ahead and replacd both the thermostadt and temperature sending unit. Is there a way to test the guage itself, to see if it's working?

I am having an FEL installed on my NH tractor. I ordered the black because I didn't want to pay the $275 for the factory color match, and mostly because I didn't want to wait the extra 6 weeks for delivery. Anyway, I intend to paint the loader NH blue to match. At $70 / gal, $20 / qt, and $7...

To account for any possible prejudices, I am posting this in both the New Holland and Mahindra forums. I currently have a New Holland TC35D. 2002 with under 200 hours. It痴 been a great tractor. My one regret is that I don稚 have a loader. It is probably worth around $12000 as is. To put a...

To account for any possible prejudices, I am posting this in both the New Holland and Mahindra forums. I currently have a New Holland TC35D. 2002 with under 200 hours. It痴 been a great tractor. My one regret is that I don稚 have a loader. It is probably worth around $12000 as is. To put a...

First of all, greetings to all from way back. I used to frequent this site a lot more when I was using the old Ford 601. Since I got my New Holland TC35D a few years ago, I spend more time working my tractor, instead of working on my tractor. I have been losing engine coolant. The only...