Search results

Put this in the general tractor repair section, but figured I'd link it here in case one of you Bobcat folks has had this issue and has any thoughts: https://www.tractorbynet.com/forums/threads/radiator-hose-snapped.461874/

Well as the description says, was out clearing some brush and started smelling radiator fluid, checked and found this: Closer inspection revealed this: As you can see, the plastic part of the lower radiator, clean snapped off and is still in the hose. My guess is the only option is...

Just a Kioti in another color so figure I'd try here in addition to the Bobcat forum: Time for a new game of stump the chump....me being the chump. First off, I've scanned quite a few threads around same topic, and none of those have helped to fix the issue. Summary: yesterday tractor worked...

Time for a new game of stump the chump....me being the chump. First off, I've scanned quite a few threads around same topic, and none of those have helped to fix the issue. Summary: yesterday tractor worked great, used for a few hours, went to crank up this morning....dash lights come on, glow...

I posted this in the Bobcat forum, but that's getting little traffic, hope hear gets a few more eyes, as I don't think it's Bobcat specific issue: OK folks...think the problem just got more expensive....turns out the issue is in the following: #7 Bearing was shredded, that in turn caused...

As the subject says, think I blew a seal (haven't looked well yet, oil all over inner tire) wondering has anyone replaced one and difficulty level? Done it on cars many times never a tractor though. Hate to have dealer do something that could be done at home. CT335 2010 FYI.

As is said, the hose broke, part # is 7188081, Bobcat online parts catalog says item not available. Is there a replacement part or new part #? I tried looking at Kioti but couldn't figure out the correct cross-reference. Any help is appreciated. JD

Used a couple of old pans I had lying around, buttoned everything back up and noticed two black washers in the pan.....I fear these go on the two side plugs but before dropping the plugs to install them would like a confirmation. They could be from some old project but I'm doubting the...

So first mow of the year and dropped the mower about an inch lower than last year. While backing up a small grade left blade caught the earth and locked up. Can't free the blade by hand, am about to take apart but wondering of the spindle/hub is toast or if there is something to look for to free...

Getting ready for this and was thumbing through the manual, it shows 11 gallons of hydraulic fluid? Is this right? I have the hst 335 and need to know if during the draining am I draining all 11 gallons? Stuff is like 35 per 2.5 gallon jug. Same on the front axle, 8 quarts gear lube? Again...

So as the topic states, this is the plan. Mower was bought used, about 10 years old and spindle is shot....so, have new spindle in hand and am removing old one....that is until I got to the blade. Backed out the bolt holding the blade to the spindle, but the blade itself screws to the spindle...

I posted this in the Bobcat forum, but thought maybe some here might have a thought as well... Guys, I just bought a used LP mower and it needs a bit of TLC, so I am painting it and figured I'd go with Bobcat Orange...I know about Valspar Autumn Crush is a good match for Bobcat Orange, but...

Guys, I just bought a used LP mower and it needs a bit of TLC, so I am painting it and figured I'd go with Bobcat Orange...I know about Valspar Autumn Crush is a good match for Bobcat Orange, but being in spray cans I look at this as more of a touch-up rather than to use it to paint a 7ft mower...

All, going to look at this mower and wondering what to keep an eye out for (guess that's generic to any used finish mower). It's 4 years old and has new blades and includes operator and parts manual. Anything else you need let me know..thanks.

Ok...got another line on an FDR1660 Land Pride mower, looks to be in good condition and it's at a local dealer so at least I have "some" recourse if he sells me a dud. He's asking $795...thoughts?

Anybody know anything about this mower? I can't seem to find much info on it. Got a line on a "new" one on CL for $800 for a 60 in and it's a drive away so would like opinions before taking a couple hour trip. Thanks

Well, pulled the trigger today...after lots or searching and research decided this was the best one for me. Mainly came down to price and dealer (both location and attentiveness). CT335 8TL Bobtach Loader GP Tires Grille Guard $19,400 All should also know, that the pricing offerings out...

Looking on Craigslist for a do-it-all CUT for a new 15AC property (RFM, FEL, Snow plow, gravel drive maint, mulching, wood work) and stumbled across this...never having heard of Branson, figured I'd come here and get yalls take on it. Thanks 2007 Branson 4720 Tractor with only 146 hours. Runs...

Tractor John Deere 750- 3 cyl diesel engine with 800 hours of use 8-speeds fwd - 2 speeds rev / locking differential / 2 wheel drive Rear P.T.O / 3-point hitch / front P.T.O. R.O.P.S. (roll over protection system) Front-end bucket loader (JD mod 70) - 5 ft Belly mower (JD mod 160) - 5 ft...

Ok...another newbie question....assuming "quality" of the cut isn't the most important thing, which is faster at getting the job done? I don't think the tractor would make a difference here, but consider it a 30-40HP CUT. I'm not talking about the putting on and taking off aspect, although...

OK...so just became the proud owner of a 15 acre property in the MD/DC suburbs. 3-4 acres are finish mowed, 5 Acre pasture, remaining pretty heavily wooded. Trying to decide what size tractor would be a best fit for me. I'm looking to Finish Mow (no trees to speak of, nice open stretches)...