Grapple EA Everything Attachments WICKED 55 Root Rake Grapple

[EverythingAttachments]

Thanks for the follow up.

You're very welcome. I don't get to spend as much time on TBN as I'd like, but I do keep it up on one of my screens at the office, so I saw the notifications first thing this morning.
Thanks for following along, and I'll be glad to assist you with any questions!
Also, my direct email is travis@everythingattachments.com
Travis

 

[EverythingAttachments]

Well, did the OP just disappear?

 

[WM75Guy]

Maybe. Seems hoses on grapples weren't the only thing he didn't like here.

Ads

What's with the ads lately, they're getting overpowering and very annoying. Got this today when I opened up the page:

www.tractorbynet.com

 

[Rich_Z]

Well, did the OP just disappear?

No. The OP has been in the hospital with his wife who has cancer the last few days. Sorry if you think my priorities are out of whack.

 

[Rich_Z]

Hey,

I didn't read the entire thread(yet).

Those hoses are routed through those holes to keep them out of the way during transit, and will be nothing like that when hooked to the tractor.

Yeah, that'd be a seriously dumb arrangement.
Hope this helps.
Travis

OK, I watched the video again closely, and I see what you are talking about. Apparently that grapple was not hooked up to the 3rd function on the loader, like the older version was, so the ends that should have been attached to the third function are actually tucked through the holes in the tines and the connectors tucked in the holes in the tine furthest to the "driver's side". Matter of fact, it looks like the loader holding the new version doesn't even have a 3rd function setup on it. Unless I missed that too.

Sorry, that was not clear during the initial viewers, and it actually appeared that the hoses were coupled through the holes, not just being stored for transport as you have explained.

Thank you for clearing that up.

 

[EverythingAttachments]

No. The OP has been in the hospital with his wife who has cancer the last few days. Sorry if you think my priorities are out of whack.

Goes to show that there may be underlying circumstances when someone doesn't respond instantly.

I wish her the best, and that's a terrible circumstance in which my mom has been battling.

I would love to assist you with arranging the best grapple investment for your tractor, and welcome you to the EA Fam!
Travis

 

[Rich_Z]

Goes to show that there may be underlying circumstances when someone doesn't respond instantly.

I wish her the best, and that's a terrible circumstance in which my mom has been battling.

I would love to assist you with arranging the best grapple investment for your tractor, and welcome you to the EA Fam!
Travis

OK, I appreciate you extending me this offer. Yeah, this is a pretty rough time. It would be hard to believe that Hell is any worse than this. My wife is a true angel on Earth, and she is actually the one encouraging me to buy a tractor. I believe she is trying to keep me distracted and wants me to have a BIG distraction in case our prayers don't work.

Sorry to hear about your mom. Mine died from lung cancer a few years ago. What a truly horrible thing cancer is.

So, I do not have my tractor yet (TYM T474HC) so I don't know what sort of ends will be on the 3rd function that is going to be installed on it. Do you show the lead times on your website when placing an order?

Thanks again.

 

[EverythingAttachments]

OK, I appreciate you extending me this offer. Yeah, this is a pretty rough time. It would be hard to believe that Hell is any worse than this. My wife is a true angel on Earth, and she is actually the one encouraging me to buy a tractor. I believe she is trying to keep me distracted and wants me to have a BIG distraction in case our prayers don't work.

Sorry to hear about your mom. Mine died from lung cancer a few years ago. What a truly horrible thing cancer is.

So, I do not have my tractor yet (TYM T474HC) so I don't know what sort of ends will be on the 3rd function that is going to be installed on it. Do you show the lead times on your website when placing an order?

Thanks again.

Yes, it's a shame people suffer from it like they do. I hope your/our prayers are answered, man.

We can always update the couplers after you determine what the tractor has, so no worries about that.

Lead times aren't posted on the website, but our current build estimate is around 3-4ishh months or so.
Travis

 

[Darth_DMack]

I'm a new tractor owner, never had one. Bought my first tractor a month or so ago, a Mahindra 5155 (55hp). I knew I "needed" a grapple, for clearning land on my new hobby farm, so not knowing what I didn't know, I bought the Mahindra branded grapple along with the Mahindra branded 6' box blade. So far, they have been doing well. The tractor is awesome, but I fear that eventually, I will fold up that grapple like a twig.

Glad I saw this thread.

If / When my Mahindra grapple breaks, I will definitely get one of these!

 

[EverythingAttachments]

I'm a new tractor owner, never had one. Bought my first tractor a month or so ago, a Mahindra 5155 (55hp). I knew I "needed" a grapple, for clearning land on my new hobby farm, so not knowing what I didn't know, I bought the Mahindra branded grapple along with the Mahindra branded 6' box blade. So far, they have been doing well. The tractor is awesome, but I fear that eventually, I will fold up that grapple like a twig.

Glad I saw this thread.

If / When my Mahindra grapple breaks, I will definitely get one of these!

I'm also glad you saw this thread. I'll be glad to assist!
If you're on facebook, join us in the EA Channel Group(or if you're not, you can still scroll through, I think).
Travis

Oh, here's a 5145 with our Wicked 66!!

 

[Rich_Z]

Yes, it's a shame people suffer from it like they do. I hope your/our prayers are answered, man.

We can always update the couplers after you determine what the tractor has, so no worries about that.

Lead times aren't posted on the website, but our current build estimate is around 3-4ishh months or so.
Travis

I will be contacting you directly through your site in the future.

 

[EverythingAttachments]

I will be contacting you directly through your site in the future.

Sounds good.
Instead of using the email link on the site, do travis@everythingattachments.com and/or send me a head's up PM on here. TBN notifications jump out at me, so I generally don't miss em.

Thanks and have a great week.
Travis

 

[Torvy]

@EverythingAttachments

Travis, I cannot find the weight of the hammers on the MLE160 ditch flail. Do you have that info available? Thanks, T

 

[EverythingAttachments]

@EverythingAttachments

Travis, I cannot find the weight of the hammers on the MLE160 ditch flail. Do you have that info available? Thanks, T

I do not see it listed anywhere, either.
If you call the warehouse guys at 877-294-3997, they may be able to find it.
Travis

 

[mikester]

I'm also glad you saw this thread. I'll be glad to assist!
If you're on facebook, join us in the EA Channel Group(or if you're not, you can still scroll through, I think).
Travis

Oh, here's a 5145 with our Wicked 66!!

View attachment 816511

Out of curiosity why would you double up the tips instead of welding a one piece gusset web between the tines and bottom round tube? If you are using 3/8" thick AR450 tines it is pretty unlikely someone will just bend the tips with a CUT.

 

[EverythingAttachments]

Out of curiosity why would you double up the tips instead of welding a one piece gusset web between the tines and bottom round tube? If you are using 3/8" thick AR450 tines it is pretty unlikely someone will just bend the tips with a CUT.

Man, you'd be surprised how rough some guys are, so we take it to next level durability, so #1, we don't have to worry about or see anything bad happen, and #2, our customers can beat it up without worry!

Oh, and one of the roughest of them all is Ted.
Travis

Some more testing shenanigans here:

 

[mikester]

Man, you'd be surprised how rough some guys are, so we take it to next level durability, so #1, we don't have to worry about or see anything bad happen, and #2, our customers can beat it up without worry!

Oh, and one of the roughest of them all is Ted.
Travis

Some more testing shenanigans here:

What's the height of the tine at the round tube?

 

[tradosaurus]

If I was getting a grapple it would be a frostbite or that style. I think it would do everything I want a grapple to do and do a better/more precise/more room to Buck up longs that it’s holding up for me than a traditional style.

I will likely never order another EA implement due to Ted’s decisions about vaccines but I do have their 55” single lid. It’s eight years old at Christmas and probably has 300 hours of actual use. It is still able to grab a sheet of paper between all the upper and lower teeth. But it’s really too heavy for my MX, about right for the M.

So what was Ted's decision about the C19 vaccine?

 

[tacticalturnip]

So what was Ted's decision about the C19 vaccine?

Probably the same as damn near every other business when confronted by the government; get the jab or get out.

I'm personally willing to give them a pass, because while I avoided the 'vAcCiNe' I also didn't have the entire weight of society, Federal, and State government breathing down my neck at a time when I'm trying to keep my business open. Damn near every business that survived the pandemic pulled some crap like that, at figurative gunpoint.

Now, given the wide availability of knowledge pertaining to the failed policies of 2020-2022, I'd shun any business that tried that **** again. Hell, 2020 turned me about into a hermit, I don't mind being alone.

 

[EverythingAttachments]

So what was Ted's decision about the C19 vaccine?

Haven't heard anything about it in a looong time, so old news, I suppose.

Yeah, that's from when the gov't was scaring the out of everyone.
Travis