Woods Rd7200

/ Woods Rd7200 #1  

Twanger

Bronze Member
Joined
Mar 22, 2002
Messages
91
Location
KCMO
Tractor
4310 4wd ehydro 420 loader asof 4/2/02
I can't decide how to use my 6ft rear discharge mower, with the top link attached, or allow the deck to completely float with the top link unattached. My problem is when I go over a crest of a hill, or down a valley my top link is either to short for the crest allowing the back wheels to come off the ground, or it is too long not allowing the back wheels to come up high enough to articulate a valley. Does anyone else just use their top link for transport?
 
/ Woods Rd7200 #2  
Around the property here I just drag it on its own wheels. I have the top link set so it engages the top floating linkage. with the linkage forward at a 45 degree angle. If I am going to transport it down the road, or load it on the trailer. I tighten the top link so the floating linkage is tight, and I can pick it up.
 
/ Woods Rd7200 #3  
It works, I've done it, but don't like the inability to pick up the deck for whatever reason. Others have replaced (temporatrily while mowing, I guess) the top link with a length of chain so that they still can pick up the deck if needed, but that the chain allows more flex.
 
/ Woods Rd7200
  • Thread Starter
#4  
The chain trick could be interesting, but going over a crest of a mound it wouldn't allow the rear wheels follow the ground. Thanks for the replies guys.
 
 

Marketplace Items

2025 ZJG ZJ-380 Mini Stand-On Track Loader Skid Steer (A59228)
2025 ZJG ZJ-380...
2019 International LT625 Sleeper 48" (A62613)
2019 International...
2013 Freightliner Bucket Truck (A55973)
2013 Freightliner...
2011 MULTIQUIP LIGHT PLANT/ FUEL TANK TRAILER (A58214)
2011 MULTIQUIP...
1901 HOMEMADE 16FT T/A TILT TRAILER (A59906)
1901 HOMEMADE 16FT...
2016 INTERNATIONAL 4300  4X2 24FT BOX TRUCK (A59908)
2016 INTERNATIONAL...
 
Top