Wide pallet forks

[SRSeedBurners]

Started a thread a few weeks back looking for pallet fork recommendations and was directed to the Express Steel forks which I nearly pulled the trigger on. A set of Land Pride PFL5648 popped up in my FB marketplace that stopped me. I was about to purchase those and then looked up the specs and found they are too narrow. The Express Steel forks are too narrow as well. I have a safety cage that I use on the forks that require the outside edge of the blades to be 51.5 inches. THe borrowed pallet forks I'm using, which are john deere with an adapter for my kubota, has a total width of 55.5 inches. All the forks I'm looking at online are width in the 40s. Now I'm on the hunt for wider than normal pallet forks. The land pride PFL5660 are wide enough but come with 60" forks which are too long. Any suggestions? Pics of the safety cage, cage fork channel width and the tape holder for tax

 

[dodge man]

Normally the forks are roughly the width of your loader arms. I’ve never seen any that go wider but that doesn’t mean they don’t.

 

[SRSeedBurners]

Normally the forks are roughly the width of your loader arms. I’ve never seen any that go wider but that doesn’t mean they don’t.

Here's the right side loader arm with the current JD fork mounted. You can see the forks extend out beyond my arms.

 

[EarPlug]

Here is a 60" or 72" frame

Pro Series Extra Wide Pallet Fork Frame Attachment - Optional Fork Blades | Titan Attachments

This 3-in-1 heavy-duty pallet fork frame features an extra wide design for demanding jobs and an SSQA connection for easy installation.

palletforks.com

 

[Sportsman762]

I have the Titan 60" wide pallet forks. I wish I had gone with the 72" wide. The forks I had on hand did not fit the frame well and I had to grind the top rail to be round rather than square. I do not use them much as I have 72" long forks on them, however they are nice to have when I need them.

The following make wide pallet fork frames.
Bradco

Bradco Signature Series 60″ Wide Fork Frame with 72″ Long 6,000 LB Pallet Forks – Skid Steer Attachment Depot

www.skidsteerattachmentdepot.com

Blue Diamond

Pallet Forks - 6,000 lb Capacity Wide Frame HD

Pallet Forks - 6,000 lb Capacity Wide Frame HD

www.bluediamondattachments.com

CL Fab

EZ-PALLET FORKS : CL Fabrication

clfab.com

arrow

Extra Wide Skid Steer Pallet Forks - Arrow Material Handling Products Learn more

Extra Wide Skid Steer Pallet Forks - Arrow Material Handling Products -

arrowmhp.com

Loflin

American Made Attachments | Loflin Fabrication Since 1993

Field-tested American made attachments for skid steer, tractor & excavator: grapples, brush cutters, buckets, pallet forks, box blades & more—explore full line.

www.loflinfabrication.com

proworks

Severe Duty 54″ Wide Rail Pallet Fork Frame with 48″ 5,500 Pound Pallet Forks – Skid Steer Attachment Depot

www.skidsteerattachmentdepot.com

Virnig

Wide Rail Pallet Fork: Walk-Through - Virnig Manufacturing

Walk-through design allows quick cab access. Choose from three tine lengths and capacities to match handling and lifting needs.

www.virnigmfg.com

Messer

https://messerattach.com/product-category/attachments/towing-lifting/pallet-forks/

There are probably more. But this is what I was looking at.

 

[jigs_n_fixtures]

I think I would just reweld the man cage.

That said, I'm not a big fan of using a FEL as a man cage. There is no stops on it to keep it from falling if there is a hydraulic failure.

 

[nyone]

I think I would just reweld the man cage.

That said, I'm not a big fan of using a FEL as a man cage. There is no stops on it to keep it from falling if there is a hydraulic failure.

This is what I would do. A single non standard attachment isn't going to stop me from buying a standard set of forks.

I bet the wider ones he needs will be nearly 2x the price...for a few inches.

 

[scootr]

That is a beautiful pup. I'll trade him for a set of 60" Bobcat forks. All of my Bobcat attachments fit my Kubota MX.