weld on back hoe teeth

[spo307]

i am building a 12" back hoe bucket and am looking for weld on shank, pin on teeth, were can i find them, not kubota I have heard there a lot of money

 

[DarrylH20]

i am building a 12" back hoe bucket and am looking for weld on shank, pin on teeth, were can i find them, not kubota I have heard there a lot of money

I like this place http://www.hltooth.com/

 

[DarrylH20]

I was just looking for shanks and didn't see any. Looks like a good place for teeth though.

 

[charlz]

When I was building my 9" bucket a while back I could find them on Ebay. The consensus was to use bolt on though so you could remove them if you wanted to get a smooth bottom trench.

 

[andymil]

I bought some teeth a couple of months ago. They were Hensley 00SPS (zero zero SPS) teeth with # 2898W00 adapters (weld on shanks). I got them from Romac Industrial Parts, Inc. They were about $12 each, including shipping, for the shank and tooth assembled but they sell them separately. The assemblies come with the teeth crimped on. They were very easy to deal with over the phone. 877-727-6622

They are a nice size for a small bucket. There are 5 of them on the 18" bucket on my Takeuchi TB 108 excavator and I'm putting three on the 10" bucket I'm building.

 

[andymil]

Sorry. I missed the "pin on" part in your post. I'd still call Romac or check there website. They may have something you can use.

 

[Cami]

Check other dealers parts departments. I've found good prices at the local Deere dealer. It doesn't matter where they come from, so call around.

Inquiring about prices is cheap; call everybody in town! I once made ~25 phone calls to find a replacement door for a truck....it makes a big difference and it gets easier with each call....but some guys might get a bit tired of you....

 

[spo307]

thanks for the help

 

[spo307]

Sorry. I missed the "pin on" part in your post. I'd still call Romac or check there website. They may have something you can use.

I am looking for weld on shank, pin on teeth that pin to shank in case they break.

 

[spo307]

will give romac a call thanks

 

[Usta]

Maybe toothbar companies.
W.R. Long or Markam

 

[jemjack]

I used some round 20mm spring steel cut to length 15 cms about and welded them directly to the bucket bottom, they work very well, the welds do break from time to time, and so need welding back on, but being very small, they do not put much resistance to the bucket when digging.

jemjack

 

[spo307]

Called romac, weld on shank, rock tooth and pin $ 20 ea. I need 3, don't know shipping yet, he is out of the shanks wont be in till the 16th nice guy, I told him I custom made the buck based on a kubota bh 90, and he talked me through it

 

[spo307]

placed the order yesterday with ROMAC very helpful on the phone, he was shipping same day.

 

[Diamondpilot]

For future reference this guy has bolt on ones for a good price. Many guys over on the Chinese Tractor Forum section put them on the FEL Bucket.

https://affordabletractorsalesco.co...tid=&picid=2789&category=&sub_category=&scid=

Chris