spo307
Gold Member
i am building a 12" back hoe bucket and am looking for weld on shank, pin on teeth, were can i find them, not kubota I have heard there a lot of money
weld on back hoe teeth
- Thread starter spo307
- Start date
- Views: 3286
charlz
Elite Member
When I was building my 9" bucket a while back I could find them on Ebay. The consensus was to use bolt on though so you could remove them if you wanted to get a smooth bottom trench.
andymil
Member
- Joined
- Jan 6, 2008
- Messages
- 35
- Location
- 20 mi east of Pittsburgh, PA
- Tractor
- 27 hp Simplicity Prestige
I bought some teeth a couple of months ago. They were Hensley 00SPS (zero zero SPS) teeth with # 2898W00 adapters (weld on shanks). I got them from Romac Industrial Parts, Inc. They were about $12 each, including shipping, for the shank and tooth assembled but they sell them separately. The assemblies come with the teeth crimped on. They were very easy to deal with over the phone. 877-727-6622
They are a nice size for a small bucket. There are 5 of them on the 18" bucket on my Takeuchi TB 108 excavator and I'm putting three on the 10" bucket I'm building.
They are a nice size for a small bucket. There are 5 of them on the 18" bucket on my Takeuchi TB 108 excavator and I'm putting three on the 10" bucket I'm building.
andymil
Member
- Joined
- Jan 6, 2008
- Messages
- 35
- Location
- 20 mi east of Pittsburgh, PA
- Tractor
- 27 hp Simplicity Prestige
Sorry. I missed the "pin on" part in your post. I'd still call Romac or check there website. They may have something you can use.
Cami
Silver Member
- Joined
- Oct 31, 2009
- Messages
- 183
- Location
- Ladysmith, British Columbia
- Tractor
- Don't have one of my own! I work on other people's machines.
Check other dealers parts departments. I've found good prices at the local Deere dealer. It doesn't matter where they come from, so call around.
Inquiring about prices is cheap; call everybody in town! I once made ~25 phone calls to find a replacement door for a truck....it makes a big difference and it gets easier with each call....but some guys might get a bit tired of you....
Inquiring about prices is cheap; call everybody in town! I once made ~25 phone calls to find a replacement door for a truck....it makes a big difference and it gets easier with each call....but some guys might get a bit tired of you....