TS354C Parts Manual

[greg_g]

Not necessarily. On the TaiShan I owned, power steering had a separate pump with it's own filter. It was hanging off the side of the engine, a silver canister with a replaceable internal filter.

//greg//

 

[Desert Bred]

Got it.. this is how i see that but im not sure.

1. Oil filter
2. New Hydraulic filter setup
3. Fuel Filter
4. (old hydraulic filter setup?)

Also, I'm planning on draining and cleaning the strainer today.. i found this schematic of the plumbing here. but it's for steering (2004) mine is 1998, but it looks close, and it shows it plumbed into the strainer.. i added the red to show the remaining plumbing in the back for the lift.



I've got the line going into the strainer at #4 and another on the opposite end of the strainer canister. Those red lines for me represent the lift hydraulics and where my attention is.

Also I couldnt find anything regarding this '?' in the picture- that 90ｺ elbow piece..

 

[Diamondpilot]

<img src="http://www.tractorbynet.com/forums/attachment.php?attachmentid=337679"/>
Got it.. this is how i see that but im not sure.

1. Oil filter
2. New Hydraulic filter setup
3. Fuel Filter
4. (old hydraulic filter setup?)

Also, I'm planning on draining and cleaning the strainer today.. i found this schematic of the plumbing here. but it's for steering (2004) mine is 1998, but it looks close, and it shows it plumbed into the strainer.. i added the red to show the remaining plumbing in the back for the lift.

<img src="http://www.tractorbynet.com/forums/attachment.php?attachmentid=337680"/>

I've got the line going into the strainer at #4 and another on the opposite end of the strainer canister. Those red lines for me represent the lift hydraulics and where my attention is.

Also I couldnt find anything regarding this '?' in the picture- that 90ｺ elbow piece..

<img src="http://www.tractorbynet.com/forums/attachment.php?attachmentid=337681"/>

#2 looks to be a fuel filter, not hydro.

Chris

 

[greg_g]

That 90 degree elbow piece is a single hydraulic remote, typically for a hydraulic dump bed trailer. If it had a QD connector on it, you'd have probably recognized it yourself. That hex bolt I described diverts hydraulic flow from the rear lift to that elbow. It may also have something to do with why your lift arms don't respond. With the flow diverted and the lift lever pulled up, hydraulic pressure raises a connected trailer bed. When you push the lever back down, gravity pushes fluid back to the sump via the same elbow.

And yes, #2 is a fuel filter. #4 is the original fuel filter housing. A spin-on canister similar to the oil filter screws into the bottom. Apparently a previous owner decided to cap it off, and use an automotive inline filter instead. I'd be inclined to return that to original equipment, as the canister has far more filtration area.

#3 isn't a filter at all, however it does have a screen in the head. That's the fuel sediment bowl. Dirt and water collect there, and must be drained/cleaned periodically.

//greg//

 

[Woodsman1234]

If you still have the PDF I would like to have a copy. My tractor is a KAMA 354X but the manuals are for a TS354C. I don't really know but it sounds like my KAMA is a 3 cylinder version of the TS354C.

I have converted my 354C parts manual to PDF; if anyone needs one just let me know.

 

[earlestone1]

I would like a pdf copy of parts manual.. Thanks earlestone1@netzero.net

 

[iRanch]

I could use your PDF version of the parts manual if you still have it available!

 

[amayasgrandpa]

I need the owners manual do you have it in pdf form?

 

[Affordable]

I have a parts manual but don't stock any parts, call Artrac tractor in Arkansas, if you want the manual I have I will take $ 25.00 plus shipping

Tommy
Affordable Tractor Sales
"Your Jinma Parts Superstore"
Home of compact Jinma, Foton, and Koyker Tractors and Parts, Wood Chippers, Backhoes - Affordable Tractor Sales Company

 

[JR1968]

Please send me a copy jason.richardson@shell.com

 

[JoeyMac]

Hi, I would like a copy please. Thank you

 

[DAN7992]

Tommy: Do you have a owners manual for a Kama Tractor Model TS354C 4 cylinder. Thanks Dan7992

 

[Affordable]

I have 1- Kama Book which is just for the tractor, the engine books are separate and I don't know which engine you have, we possibly have that book also

If you want this tractor parts book email me at tommydplumber@gmail.com

Tommy
Affordable Tractor Sales Co
"Your Jinma Parts Superstore"
Home of compact Jinma, Foton, and Koyker Tractors and Parts, Wood Chippers, Backhoes - Affordable Tractor Sales Company
979-865-4002

 

[pswift]

Tommy: Do you have a owners manual for a Kama Tractor Model TS354C 4 cylinder. Thanks Dan7992

Noting conversation about KAMA tractors, I have a KM 454.
No service manual nor parts vendor.
Does anyone have a suggestion on whom I may contact for parts/manual?

 

[Affordable]

Sorry I only had one and the other guy bought it, Artrac Tractor in Ark. had some parts and books, may want to see if he can help

If not I May be able to get you one from my Supplier and have him ship with a parts order, the only manuals they have are Tractor parts, Engine, ( need to know what engine your tractor has ) There are NO SERVICE MANUALS for these tractors

Tommy
Affordable Tractor Sales
"Your Jinma Parts Superstore"
Home of compact Jinma, Foton, and Koyker Tractors and Parts, Wood Chippers, Backhoes - Affordable Tractor Sales Company

 

[wolverine4u1]

I would like a pdf copy as well please.
Thanks Dale

 

[Woodsman1234]

Re: Woodsman 1234 TS354C Parts Manual

I too would like a copy of the pdf for the TS354S manual.

 

[tubebender]

yes, i would like a copy. working on one and have no manuals.

 

[Bob Rooks]

yes, i would like a copy. working on one and have no manuals.

Tommy said he only had ONE manual book, and that it had been sold. You will have to contact him directly for an update. Afaik, there are NO PDF manuals for this tractor. If you have the Y385 engine, it's the same as in the Jinma 354. Please read all previous posts.
"Artrac Tractor in Ark. had some parts and books, may want to see if he can help."
Maybe you could Google "Kama tractor manuals" and see what pops up.

 

[tubebender]

this kama 354 has a 485t motor, at this moment I have no manuals for that engine. so far google has been no help, but thx any way. we will take any advice on the setting the timing to the injector pump. normal T>D>C> to pump is showing timing off by 94 deg.but engine will run on ether. so cam to crank timing is correct.