Throttle stuck wide open
- Thread starter Ed@richsq
- Start date
- Views: 1810
TractorTech
Elite Member
- Joined
- Jan 26, 2012
- Messages
- 3,057
- Location
- California
- Tractor
- Ford 7710, Ford 550, Ford 1910, Ford 4430, KD Forklift, Ford LGT17H, New Holland L255 Skidsteer
Welcome to TBN.
Can you tell whether it is the linkage or the pump?
Did you take the linkage off of the pump and see if the pump would return to idle?
If so, did you try to move the throttle shaft on the pum?
Can you tell whether it is the linkage or the pump?
Did you take the linkage off of the pump and see if the pump would return to idle?
If so, did you try to move the throttle shaft on the pum?
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,914
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
Welcome to TBN.
Try lube spray the pivot points than work throttle level by hand with engine off.
Try lube spray the pivot points than work throttle level by hand with engine off.
Tx Jim
New Member
Welcome to this forum.
I agree that throttle linkage needs to be checked but I'll bet governor on engine has failed. https://partscatalog.deere.com/jdrc/sidebyside/equipment/70311/referrer/navigation/pgId/20629824
I agree that throttle linkage needs to be checked but I'll bet governor on engine has failed. https://partscatalog.deere.com/jdrc/sidebyside/equipment/70311/referrer/navigation/pgId/20629824
