string in rebuild kit/to30

/ string in rebuild kit/to30 #1  

killbilly

New member
Joined
Feb 22, 2005
Messages
2
hey guys, i got a rebuild kit the other day for my old ferguson to30 and when i opened it there was some string in the box. is this supposed to be some sort of gasket or what. i can't find the application anywhere in the manual. thanks for the help.
 
/ string in rebuild kit/to30 #2  
Are we talking about a motor rebuild kit...if so the only thing I can imagine is that the rear main kind of looks like string (if you hold you tounge right), more like a shoe lace
 
/ string in rebuild kit/to30 #3  
Ditto. I've never been into a fergy.. but ford uses rope seals as mains... though i think they mostly leak or drip a little.. even if installed correctly. Luckilly napa can cross the ford rope seal over to a modern neophrene one.. Perhaps the fergy one can be crossed as well?

Soundguy
 
/ string in rebuild kit/to30 #4  
Could it be the pull string for pulling the upper rear main seal thru on a partial rebuild? I mean that is just a guess but it used to be a trick the old timers did to replace leaky rear mains without a complete tare down.

Mark
 
/ string in rebuild kit/to30 #5  
Could very well be. Especially if it is a hollow braid.

Soundguy
 

Marketplace Items

2009 IC Corporation PB105 School Bus (A64194)
2009 IC...
2018 International DuraStar 4300 26ft. Box Truck (A61573)
2018 International...
2015 Chevrolet Silverado 1500 Crew Cab Pickup Truck (A59228)
2015 Chevrolet...
2015 JOHN DEERE 644KH HYBRID LOADER (A66091)
2015 JOHN DEERE...
2017 Hitachi 85USB (A64126)
2017 Hitachi 85USB...
FIFTH WHEEL ATTACHMENT PLATE (A65643)
FIFTH WHEEL...
 
Top