string in rebuild kit/to30

/ string in rebuild kit/to30 #1  

killbilly

New member
Joined
Feb 22, 2005
Messages
2
hey guys, i got a rebuild kit the other day for my old ferguson to30 and when i opened it there was some string in the box. is this supposed to be some sort of gasket or what. i can't find the application anywhere in the manual. thanks for the help.
 
/ string in rebuild kit/to30 #2  
Are we talking about a motor rebuild kit...if so the only thing I can imagine is that the rear main kind of looks like string (if you hold you tounge right), more like a shoe lace
 
/ string in rebuild kit/to30 #3  
Ditto. I've never been into a fergy.. but ford uses rope seals as mains... though i think they mostly leak or drip a little.. even if installed correctly. Luckilly napa can cross the ford rope seal over to a modern neophrene one.. Perhaps the fergy one can be crossed as well?

Soundguy
 
/ string in rebuild kit/to30 #4  
Could it be the pull string for pulling the upper rear main seal thru on a partial rebuild? I mean that is just a guess but it used to be a trick the old timers did to replace leaky rear mains without a complete tare down.

Mark
 
/ string in rebuild kit/to30 #5  
Could very well be. Especially if it is a hollow braid.

Soundguy
 

Marketplace Items

2015 Freightliner M2 106 AWD Altec AT37G Bucket Truck (A60460)
2015 Freightliner...
NEW Wolverine ADB-13-1218R, Skid Steer Auger (A62679)
NEW Wolverine...
Front Tank Bracket (A64126)
Front Tank Bracket...
Muck-Truck Wheelbarrow (A61567)
Muck-Truck...
2022 Mac Trailers 48ft. T/A Walking Floor Trailer (A61573)
2022 Mac Trailers...
300 Gal Portable Fuel Tank (A64127)
300 Gal Portable...
 
Top