starting procedure for m6040

   / starting procedure for m6040 #1  

pockets

New member
Joined
Oct 20, 2010
Messages
1
Tractor
m6040
on the kubota m6040 what is the starting procedure (no manual to be found) on the ignition switch there is is an off position, then a lightning stroke, then the next postion the dash lights come on and then the next is the start. Where is the glow plug indicator located and what position turns on the glow plugs ?
 
   / starting procedure for m6040 #2  
on the kubota m6040 what is the starting procedure (no manual to be found) on the ignition switch there is is an off position, then a lightning stroke, then the next postion the dash lights come on and then the next is the start. Where is the glow plug indicator located and what position turns on the glow plugs ?

Turn switch to "On" position (roughly straight up and down). If the coolant temp is too low the glow plug indicator (left center of dash, below 4wd indicator) will illuminate. Hold in "On" position until glow plug indicator goes out. Turn switch to start.
 

Tractor & Equipment Auctions

3in Poly Pipe (A49461)
3in Poly Pipe (A49461)
INGERSOLL RAND COMPRESSOR (A50854)
INGERSOLL RAND...
(INOPERABLE) CAT D4D (A50854)
(INOPERABLE) CAT...
WHITE CI-7 DRAW WORKS POWERED BY TWIN (60 SERIES) DETROIT 14.0L ENGINES (A50854)
WHITE CI-7 DRAW...
2017 Makita HM1307CB 35lb Demolition Hammer (A49461)
2017 Makita...
2012 John Deere 7280R MFWD Tractor (A51039)
2012 John Deere...
 
Top