Front-End Loader SSQA brackets

   / SSQA brackets #1  

catdozer

Platinum Member
Joined
Sep 18, 2011
Messages
513
Tractor
john deere
I'm throwing the idea around, thinking of making top and bottom brackets to weld on for new or converting attachments to SSQA. These would be in either 2 or 4 pieces and 3/8 and 1/2 thick. They would come ready to weld, angles would be all there.
Would like some input, would sell these. And they would be a lot stronger than the entire plates. I have made a few before and worked great.
Will have some pictures up tomorrow to display what I'm thinking.
 
   / SSQA brackets #2  
I would make them two piece vs four piece. The simpler the design the better they will sell. MY 2 cents.
 
   / SSQA brackets #3  
One piece is best overall. Then the builder doesn't have to rely on the integrity of the attachment to maintain the dimensional stability of the power unit's coupling device. Some don't respond well to one side of the coupler getting out of position relative to the other.
 
   / SSQA brackets #4  
I'm throwing the idea around, thinking of making top and bottom brackets to weld on for new or converting attachments to SSQA. These would be in either 2 or 4 pieces and 3/8 and 1/2 thick. They would come ready to weld, angles would be all there.
Would like some input, would sell these. And they would be a lot stronger than the entire plates. I have made a few before and worked great.
Will have some pictures up tomorrow to display what I'm thinking.
I could really use the 2 lower brackets (2 pieces) but have my own top bracket I have to use. I've built a Bucket Implement that I need to mount these lower brackets onto. I would weld your bracket to a bolt-on plate. You can see what I'm putting them on at bottomlessbucketstore.com
 
 

Tractor & Equipment Auctions

GENERATOR HOUSE POWERED BY TWIN (60 SERIES)  DETROIT 14.0L ENGINES (A50854)
GENERATOR HOUSE...
2022 Mack MD Rollback Truck (A50323)
2022 Mack MD...
2019 MMDI 14ft T/A Utility Trailer w/ Fuel Tank (A48082)
2019 MMDI 14ft T/A...
2014 INTERNATIONAL PROSTAR (A50854)
2014 INTERNATIONAL...
2007 TRANSCRAFT 48X102 FLATBED (A50854)
2007 TRANSCRAFT...
2006-2009 Ford 4x4 Pickup Truck Bed (A49461)
2006-2009 Ford 4x4...
 
Top