simplicityguy92
Bronze Member
- Joined
- Mar 5, 2008
- Messages
- 88
does anyone think it would be possible to make tracks that fit over the tires on an old bobcat?
skidsteer tracks
- Thread starter simplicityguy92
- Start date
- Views: 1674
YukonKing
Bronze Member
Goodday,
Yes I've seen them built, and used them on bobcat for winter to pull a chipper through the bush. A series of crossbars that cover the tire side to side then extend down the sidewall a short distance. Just like regular snow chains crosslinks/bars but bent solid steel. Then linked togethere with chain, just like the rails on reg chains. Usually more crossbars (to provide floatation) then if needed you can weld (coarks) to the face of bar to add traction.
I've seen solid ones i.e. they are put on with one tire off then the other tire is put in the loop then bolted back on. Or like tipical chain with a claspe of some type.
Hope it makes sense.
Yes I've seen them built, and used them on bobcat for winter to pull a chipper through the bush. A series of crossbars that cover the tire side to side then extend down the sidewall a short distance. Just like regular snow chains crosslinks/bars but bent solid steel. Then linked togethere with chain, just like the rails on reg chains. Usually more crossbars (to provide floatation) then if needed you can weld (coarks) to the face of bar to add traction.
I've seen solid ones i.e. they are put on with one tire off then the other tire is put in the loop then bolted back on. Or like tipical chain with a claspe of some type.
Hope it makes sense.
rdbrumfield
Veteran Member
hit on search above and type in tracks and rdbrumfield. I posted some pics of tracks I made in 02. I made them for each tire, but it would work for a bobcat too.
