SCORE - Quick Hitch H-F

[MahindraYanmar]

I park my implements next to the barn where I had dug out because water flowed in the barn clean outs. A couple of bags of crusher stone, sitting on pallets, an occasional spray of Glyphosate, It’s the perfect place.

 

[bmaverick]

I park my implements next to the barn where I had dug out because water flowed in the barn clean outs. A couple of bags of crusher stone, sitting on pallets, an occasional spray of Glyphosate, It’s the perfect place.

Oh no, toxic tractor implements.

Hope you are not looking for a big million dollar settlement.

 

[bmaverick]

When the weather isn't so cold out, the next project for the quick-hitch will be this. All I need is a 30-gallon plastic barrel. Those are $8 on CL out here.

The 30-gallon fits like a glove for the quick hitch. This should be about 240-lbs of rear ballast.

 

[bmaverick]

Reading the Reddit post, the 30-gallon is not filled to the top.

Mark the inside of the 30-gallon barrel to 26-inches MAX.

Time to cure is 7 - 10-days above 70F.

I just have to find a good 1-inch solid rod.

 

[George2615]

Reading the Reddit post, the 30-gallon is not filled to the top.

Mark the inside of the 30-gallon barrel to 26-inches MAX.

Time to cure is 7 - 10-days above 70F.

I just have to find a good 1-inch solid rod.

Check neighborhood sales or marketplace for old weight lifter bars.

 

[bmaverick]

Some one made it as a lawn roller. Just keep the outer plastic barrel over the concrete.

 

[California]

I just have to find a good 1-inch solid rod.

Maybe fabricate this plus some ears welded onto the square tube.

Source: An old post where I added this new attachment point, onto an old incompatible back blade.

 

[ponytug]

Have you considered a design that would allow it to roll, if wanted? E.g. 1.25 pipe as a sleeve, and a 1" axle?

All the best,

Peter

 

[careyo63]

American threaded Pin on the L.and the Org. Yanmar R.. The small Metric Threads wear out. Standard threads screw right in and I Locked with a Locking Washer and Nut so it doesn't come loose anymore. Actually fell out before mowing so I had to lock it up!

 

[bmaverick]

You can SCORE a huge deal right now, this price has not been seen since 2020 !!! Even better than the last Black Friday sale!