Rounded off drain plug

   / Rounded off drain plug #2,083  
I think you have a size problem.
I'm only on page 21 as of this post.
I like big pages.
I can't stop chuckling. I checked with my wife. There is no size problem. .............. HA HA - I am set at the default. You must be seeing at about 100 posts per page. Wonder if I will live long enough to see this thread end? Ha. It is amusing.
Yesterday at 8:52 PM
#2,075

Rounded off drain plug​

Prev
Next
 
   / Rounded off drain plug #2,084  
I wonder whether he ever tried getting that thing out with a... pallet! :ROFLMAO:

NOTE: heating and cooling is still a good approach; if not a torch then perhaps a heat gun set on stun...
 
   / Rounded off drain plug #2,085  
Once again...I should know better by now. Drinking a soda reading replies like this!!!!!
 
   / Rounded off drain plug #2,086  
I wonder whether he ever tried getting that thing out with a... pallet! :ROFLMAO:

NOTE: heating and cooling is still a good approach; if not a torch then perhaps a heat gun set on stun...
Saaay there,i don't believe he did. I also don't recall anyone suggesting he try it with his fingers either.🙄
 
   / Rounded off drain plug
  • Thread Starter
#2,087  
Oh good lord.

Hello!

Can't remember if I actually stated, issue with using a pipe wrench was that it just sheared material from the plug.

The beam running underneath is a support between the loader frame, bit of a hassle to remove and replace (due to pressure on it) but ended up doing so to drill through the plug and use the easy out bit shown in the plug back in whichever post I uploaded that picture in.
 
   / Rounded off drain plug #2,088  
Wow. Three+ years and 209 pages, for such a (fairly) simple/common problem.
 
   / Rounded off drain plug #2,089  
1642953286309.png
 
   / Rounded off drain plug #2,090  
Oh good lord.

Hello!

Can't remember if I actually stated, issue with using a pipe wrench was that it just sheared material from the plug.

The beam running underneath is a support between the loader frame, bit of a hassle to remove and replace (due to pressure on it) but ended up doing so to drill through the plug and use the easy out bit shown in the plug back in whichever post I uploaded that picture in.
Yes, you mentioned it in post # 10. (The only reason I know that is because in the latest resuscitation of the thread, it was mentioned a few days ago.)
 

Tractor & Equipment Auctions

Kubota 24in Quick Attach Compact Excavator Tooth Bucket ONE PER LOT (A51039)
Kubota 24in Quick...
2013 John Deere 824K (A51039)
2013 John Deere...
2025 Swict 84in Bucket Skid Steer Attachment (A50322)
2025 Swict 84in...
LINDE H70 FORKLIFT (A50854)
LINDE H70 FORKLIFT...
2018 FREIGHTLINER 1085D DUMP TRUCK (A51406)
2018 FREIGHTLINER...
Gravelly Pro-Turn 148 48in Zero Turn Mower (A48082)
Gravelly Pro-Turn...
 
Top