Rolled it over tonight.Question?B2650

   / Rolled it over tonight.Question?B2650 #31  
   / Rolled it over tonight.Question?B2650 #32  
Still working great, was dragging trees off the hillside last week and I can go anywhere without fear of flipping over. Just grab the end of the log and lift it up, no problem with traction at all.
 
   / Rolled it over tonight.Question?B2650 #33  
Did the same thing in the same way a few years ago with a BX25. Ran on it's side and blew clouds of smoke till it ran out of fuel after turning key off. Pulled it back upright with my truck up the hill and started it and ran fine the rest of the time I owned it. I just turned the key and cranked a short time and fired right up. Smoked some but then cleared out. Fire it up and go forth!:thumbsup:

John, where you live you might have to go with triples, that beautiful view you have makes it worthwhile though.:thumbsup:
 
   / Rolled it over tonight.Question?B2650 #34  
As stated above you should not be able to easily liquid lock a diesel. Theoretically you could run enough oil through an open valve to do it, but I doubt that happened.

True, but I have seen enough posts right here on TBN of someone bending a rod, or worse, when cranking an engine over after a tractor rolled, that I wouldn't take any chances myself. I have concluded the problem is a lot more common than I realized.
 
   / Rolled it over tonight.Question?B2650 #35  
True, but I have seen enough posts right here on TBN of someone bending a rod, or worse, when cranking an engine over after a tractor rolled, that I wouldn't take any chances myself. I have concluded the problem is a lot more common than I realized.

X2 :confused3:
 
   / Rolled it over tonight.Question?B2650 #36  
Any pictures yet?
 
   / Rolled it over tonight.Question?B2650
  • Thread Starter
#38  
Here is where i was at 1479681318752.jpg when i rolled it over1479681293170.jpg
 
   / Rolled it over tonight.Question?B2650 #39  
Thanks for the pictures. Hopefully your 'puckermeter' now has been calibrated for future reference!
 

Tractor & Equipment Auctions

Miller Bobcat 225G AC/DC Welder Generator Set (A49461)
Miller Bobcat 225G...
2013 POLARIS RANGER 800 EFI UTV (A51243)
2013 POLARIS...
P&H OMEGA 20-20 (A50854)
P&H OMEGA 20-20...
2018 FREIGHTLINER CASCADIA TANDEM AXLE SLEEPER (A51222)
2018 FREIGHTLINER...
1994 LUFKIN (A50854)
1994 LUFKIN (A50854)
IF YOU BID ON AN ITEM YOU MUST PAY FOR IT!! NO BACKING OUT AFTER IT IS SOLD!! (A50775)
IF YOU BID ON AN...
 
Top