Quick Hitch Adaptor

/ Quick Hitch Adaptor #1  

ch47dpilot

Gold Member
Joined
Mar 26, 2010
Messages
261
Location
Enterprise Alabama
Tractor
09 Kubota L3400
I have the TS version of Pats Easy Change System. The adapter is designed for CAT 2 but my attachments are CAT1. I found these on Amazon. Amazon.com: RanchEx 1;)74 Quick Hitch Adapter Bushing Kit - Cat 1 For Quick Hitch (SKU 12851): Garden & Outdoor based on the description I figured they would work better than sleeves with washers and lynch pin. When I got them(and in description online) it says 1 1/8 OD. Well all 3 I ordered where 7/8" ID and 1 7/16" OD. Since all 3 where the same I figured its not a packaging error. My question is has anyone bought something similar that had the CAT 1 7/8" ID and 1 1/8" CAT 2 OD.
 
/ Quick Hitch Adaptor #2  
I use those type for my QH-compatible implements that use the one-sided pin arrangement. Most of my implements have the clevis-type pins, which I like much better.

Having said that, those one-sided pin adapters work great, easy to install and ensure the implement doesn't slide off one side.

Good luck.
 
/ Quick Hitch Adaptor #3  
It won't slide off one side with the simple bushings, either. The other side stops it. :)

Bruce
 
/ Quick Hitch Adaptor #4  
Generally those knob style adapters are for the Quick Hitch standard. Which is Cat 3 diamater pins. So those adapters are for Cat1 to Cat3 lin diamaters. Cat 2 gear generally has the clevis style pin supports on the impliments as the clevis are a lot stronger.
 
/ Quick Hitch Adaptor #5  
I have the TS version of Pats Easy Change System. The adapter is designed for CAT 2 but my attachments are CAT1. I found these on Amazon. Amazon.com: RanchEx 1274 Quick Hitch Adapter Bushing Kit - Cat 1 For Quick Hitch (SKU 12851): Garden & Outdoor based on the description I figured they would work better than sleeves with washers and lynch pin. When I got them(and in description online) it says 1 1/8 OD. Well all 3 I ordered where 7/8" ID and 1 7/16" OD. Since all 3 where the same I figured its not a packaging error. My question is has anyone bought something similar that had the CAT 1 7/8" ID and 1 1/8" CAT 2 OD.

I bought and returned that. It came w bushings. Tsc carries a bushing that should do what you want. As does rural king.
 
 

Marketplace Items

HLA Attachments Loader Forks (A64119)
HLA Attachments...
HOMEMADE TIRE DRAG (A63291)
HOMEMADE TIRE DRAG...
Patterson water pump (A59230)
Patterson water...
Adams 5 T Fertilizer Spreader (A63688)
Adams 5 T...
Bell 1600 Gallon Nurse Trailer (A63688)
Bell 1600 Gallon...
Caterpillar 3208 Truck Engine Service, Parts and Operation Manuals (A63117)
Caterpillar 3208...
 
Top