Publishing Loader Capacity Numbers That Far Exceed The Capacity Of The Axles

   / Publishing Loader Capacity Numbers That Far Exceed The Capacity Of The Axles #21  
Again, not is and never has been an issue with either of mine but then they aren't CUTS either. I know nothing about them and candidly, don't care. Not in my wheelhouse at all.
 
   / Publishing Loader Capacity Numbers That Far Exceed The Capacity Of The Axles #22  
I'm glad you're spending so much time telling us you don't care about things that aren't important to you.
 
   / Publishing Loader Capacity Numbers That Far Exceed The Capacity Of The Axles #23  
How many front axles ahve been broken on tractors by lifting something that exceeds the capacity?

It seems ridiculous the manufacturer would have a rated load on the front axle that is less than the weight added by maxing the FEL?
I would suggest that the low capacity number is for a load over rough terrain. Heaven knows that nobody here has ever loaded a bucket and gone bouncing across hills and hummocks but I am sure some have. 😀
 
   / Publishing Loader Capacity Numbers That Far Exceed The Capacity Of The Axles #24  
In my view, none are over rated for capacity. It's the owner that overloads them by adding 'ballast' to the tractor, something I don't do.
My little tractor will lift a ton out of the back of my pickup as delivered, but is just a little tippy without something hanging on the back, usually a landplane, box blade, or in winter, a snow blower. Ballast makes loader work safer.
 
   / Publishing Loader Capacity Numbers That Far Exceed The Capacity Of The Axles #25  
My question is why someone would buy a 1,500 lb lawnmower and expect to operate it like a 10,000 lb skidsteer?
A lot of the SCUT and CUT buyers lack the knowledge and experience to buy the tractor they are. They also are prone to roll-overs and similar things due to no load awareness and the effects of your Cg.
 
   / Publishing Loader Capacity Numbers That Far Exceed The Capacity Of The Axles #27  
bx.jpg

What 1600 lbs worth of mulch and shrub looks like in the BX brochure
 
   / Publishing Loader Capacity Numbers That Far Exceed The Capacity Of The Axles #28  
I would suggest that the low capacity number is for a load over rough terrain. Heaven knows that nobody here has ever loaded a bucket and gone bouncing across hills and hummocks but I am sure some have.

Exactly. If that 1600lb rating is good for when you hit a 6” rut at 8 mph, it’s good for 2000lbs on a stone driveway at 3 mph.

What the axle is rated isn’t just one number.
 
Last edited:
   / Publishing Loader Capacity Numbers That Far Exceed The Capacity Of The Axles
  • Thread Starter
#30  
In my view, none are over rated for capacity. It's the owner that overloads them by adding 'ballast' to the tractor, something I don't do.
Hey 50 you probably shouldn't apply for a loader position at this place then 😄

 

Tractor & Equipment Auctions

Toro Z-Master 5000 Series 72in Zero-Turn Commercial Mower (A56857)
Toro Z-Master 5000...
2007 Ford F-350 9ft. Stakebody Flatbed Truck (A55852)
2007 Ford F-350...
DEUTZ MARATHON 60KW GENERATOR (A55745)
DEUTZ MARATHON...
LOT: (80 approx.) Gallons of Chevron Delo 400 XLE SB SAE 15W-40 Synblend (A59076)
LOT: (80 approx.)...
2025 4 reel trailer (A55973)
2025 4 reel...
2022 Ford F-250 XL 4x4 Ext. Cab Pickup Truck (A55973)
2022 Ford F-250 XL...
 
Top