Power Washer Troubleshooting

   / Power Washer Troubleshooting #1  

snpower

Gold Member
Joined
Nov 12, 2010
Messages
441
Location
Charlottesville, Virginia
Tractor
John Deere GT235, GT 275, 1025R
Perhaps a stretch for Lawn & Garden but...

I have a Black Max pressure washer with a Honda GCV160 engine. It is 9 years old, and has been trouble free until today. It is not developing any pressure; I do not hear the characteristic "loaded" sound when the pump is running. I used it two days ago and everything was fine. The water hose isn't clogged and the wand hose is virtually brand new. I'm hardly getting anything out of the sprayer even with the pressure nozzle removed.

I pulled out the loader valve after seeing someone do that on youtube - it isn't sticking that I can determine. Thinking I need to get a new one of those or perhaps a pump assembly...
 
   / Power Washer Troubleshooting #2  
Check the inlet screen. Get rid of it, they're useless.
 
   / Power Washer Troubleshooting #3  
Pumps are pretty cheap, when I bought my gas driven PW, I bought a spare pump as well. 5 years and the spare is still in the box.
 
   / Power Washer Troubleshooting #4  
if that does work, take some motor oil and run it into the pump assembly itself through the water inlet, a lot of the time it will unstick them.
 
   / Power Washer Troubleshooting #5  
Before I start the engine on my gas power washer, I turn the water/hose on and hold the wand open so that water flows through and gets any air pockets out. Seems to help
 

Tractor & Equipment Auctions

2012 Bomag BC572 Refuse Compactor (A49346)
2012 Bomag BC572...
2017 Mack GU713 Granite Tri-Axle Dump Truck (A48081)
2017 Mack GU713...
(1) 10ft Livestock Panel (A48837)
(1) 10ft Livestock...
UNUSED CFG SKID STEER AUGER SET (A50460)
UNUSED CFG SKID...
Year: 2015 Make: Hyundai Model: Elantra Vehicle Type: Passenger Car Mileage: 125,812 Plate: Body (A48082)
Year: 2015 Make...
UNUSED Bubble Aluminum Foil Reflective Insulation (A50860)
UNUSED Bubble...
 
Top