Plowing engine trouble

/ Plowing engine trouble
  • Thread Starter
#21  
Just seen there is fuel coming out of 2 of the 3 lines coming out of the pump. They are tight any clues of the cause ? ImageUploadedByTapatalk1452714614.803268.jpg
 
/ Plowing engine trouble #22  
is the sealing part deformed? i dont think this is why it would not start though?
 
/ Plowing engine trouble
  • Thread Starter
#24  
It was low 30s. I guess it could have been doing that earlier. I have it in the garage now will be going out soon to see what is wrong with it.
 
/ Plowing engine trouble
  • Thread Starter
#25  
That about when it died but it got probably 5 over the night
 
/ Plowing engine trouble
  • Thread Starter
#26  
Got the Yanmar back together. Had to bleed the whole system. She fired up and went and plowed my huge driveway and it did great. I am loving this tractor.
 
/ Plowing engine trouble #27  
Got the Yanmar back together. Had to bleed the whole system. She fired up and went and plowed my huge driveway and it did great. I am loving this tractor.

Good to hear :thumbsup: I assume you have the winterizer in there??

Addative.jpg


While your at it....Has your antifreeze been changed or tested in a while?
 
/ Plowing engine trouble
  • Thread Starter
#28  
Ah no winterizer. I will have to get some. Anti freeze is full don't know when the last time it was changed. I will have to do that to. Does it matter what kind of antifreeze I use?
 
/ Plowing engine trouble #30  
Ah no winterizer. I will have to get some. Anti freeze is full don't know when the last time it was changed. I will have to do that to. Does it matter what kind of antifreeze I use?

As Todd8665 mentioned add the Power Service.
I would get in the practice of adding the Power Service in all fuel year round. It has other benefits and will help avoid this problem in the future.

Glad your running again.
 
/ Plowing engine trouble
  • Thread Starter
#31  
Sure will! The fuel lines are not leaking any more either.
 
/ Plowing engine trouble #37  
yep you have a water pump. Go with 50/50.

If you did not have one Todd is right you only want 25% antifreze or you will overheat as the thermosiphon wont work correctly.
 

Marketplace Items

2010 Kenworth T3 Class 7 Flatbed, 4x2, w Tuck-Under Liftgate (A63689)
2010 Kenworth T3...
2016 Audi A6 AWD Sedan (A64557)
2016 Audi A6 AWD...
2014 BRENNER 210 BBL CRUDE TRAILER W/ PUMP (A65643)
2014 BRENNER 210...
Rotary SPOA9-200 Automotive Lift (A59228)
Rotary SPOA9-200...
2022 EZ-GO ELITE ELECTRIC GOLF CART (A63276)
2022 EZ-GO ELITE...
2012 MACK GU GRANITE 6X4 T/A ROLLOFF TRUCK TRACTOR (A59914)
2012 MACK GU...
 
Top