Grapple Pin On Grapple

[buck12]

I have been doing a little research on grapples. I really want a grapple for my Mahindra 2615 with a 106 loader. Problem is my tractor doesn't have the quick attach bucket and I really don't want to spend the money to convert it. I found where BamaRob added a Millonzi grapple to his 2615 in this thread http://www.tractorbynet.com/forums/attachments/98559-grapple-install.html It appears Millonzi is no longer around. Does anyone make a pin on grapple to fit my loader?

 

[wcampbell47]

WR Long claims to have the schematics for over 750 FEL's. Tried them?

 

[Gordon Gould]

I have an ATI bolt on grapple. Fits a wide range of buckets. My bucket is 5'.
I couldnt make the link to Millonzi work so I dont know exactly what you want. Maybe something like the ATI will work for you.

 

[sbakf]

ANBO has one that will pin to my BX2660 - still thinking if I really need one. Have one of theirs (quick attach) on my L5740 - been very happy with it. They're expensive, but extremely well built - give them a call.

 

[Artisan]

If THIS is your fel's bucket then THIS might be the just the ticket for you, perhaps powered with THIS. (Scroll to bottom, look at 700-5032-4080 )

 

[buck12]

WR Long claims to have the schematics for over 750 FEL's. Tried them?

I will check with long. Didn't see that when checking their web site. I was planning to use their kit for the hydraulics.

 

[buck12]

I have an ATI bolt on grapple. Fits a wide range of buckets. My bucket is 5'.
I couldnt make the link to Millonzi work so I dont know exactly what you want. Maybe something like the ATI will work for you.

I have been trying to decide between a bolt on grapple like yours and a dedicated grapple. It looks like your bolt on works well.

 

[Gordon Gould]

I have been trying to decide between a bolt on grapple like yours and a dedicated grapple. It looks like your bolt on works well.

It does. It is not as good as a dedicated unit but for me it was a good trade with my semi-perminent mount bucket. I did add some teeth to the grapple fingers to give it more bite. I cut some short pieces of 1/2" rebar and welded them on. You can see them in this picture I think.

 

[jake98]

Unlimited Fabrication made mine pin-on. rootgrapple.com

 

[HCJtractor]

my Kubota was not QA so I added the Tach All quick connect system that converts the FEL to standard skid steer QA. Seems it costs about 6 or $700. It works pretty good, is not perfect but certainly decent. I have a Markham grapple and it is awesome, probably my most useful implement.