PICTURES ONLY thread

[dirtymartini]

A few weeks ago when I brought my R 4047 home

 

[dirtymartini]

A few weeks ago when I brought my R 4047 home

View attachment 446155

View attachment 446156

 

[peter3759]

They are fantastic machines!

 

[Bentley Meredith]

 

[Bentley Meredith]

 

[Keltic]

 

[Ralph Copp]

Busy fall, plowing field to rid alders. Cutting and collecting wood. Bush cutting field for neighbor. Adding 3" to back drag. Getting 7010 setup for winter.

 

[ncrebel8]

To wet to do anything, sitting in the house bored, so...

The wife cutting while I was going to the other farm,


Posted before, the beginning of a new horse pasture,




Spreading lime/waste mixture on the hay fields..


The ever present co-pilot,

 

[Blue hood]

Hi there
I recently bought an LS R4041 and made some add-ons like a 12,000lb winch and a front and back 400 watts total on bar lights, (not yet wired).

I like to know if any of this charge could overwhelm my 80amps AGM battery, and if that's the case, if I should add a 22 amp second battery kit
(XS Power XP750CK).

NOTE: All are not to run a the same time.

Thanks

 

[lostcreekranch]

Hi there I recently bought an LS R4041 and made some add-ons like a 12,000lb winch and a front and back 400 watts total on bar lights, (not yet wired). I like to know if any of this charge could overwhelm my 80amps AGM battery, and if that's the case, if I should add a 22 amp second battery kit (XS Power XP750CK). NOTE: All are not to run a the same time. Thanks

What is power requirements of the winch?

400 watts for LED Light bars? That's 33.4 amps. That's a lot of light? 4 x 48 watt LED lights will give you a lot of light and give you ability to point lights as you need. Light bars are over rated IMHO.

Sent from my iPad using TractorByNet

 

[Blue hood]

Sorry, fail to add the pictures.

 

[Blue hood]

The winch amp draw could be from 85 to 300 at 5% duty cycle, (max 45 seconds).
The front bar light it's rated at 210 watts, the back bar at 90 watts, and the winch spot lights 2x48= 96watts.

 

[lostcreekranch]

1 HP = 746 watts

(HP x 746) / volts = amps

(5 HP x 746) /12 volts = 311 amps

Sent from my iPad using TractorByNet

 

[skidsareforkids]

Time to get it back on track.

 

[peter3759]

Skids I don't know where you are from but where i am it's more like this kind of back to work!

 

[Boris1]

Some pics from today's snow.

 

[skidsareforkids]

Skids I don't know where you are from but where i am it's more like this kind of back to work!

View attachment 454648

This picture may have been from that work day or a previous one I just can't remember. Less than a year ago that pasture was so overgrown with cedar and mesquite you couldn't even crawl through it. In the previous picture I lit the pile on a day that was probably a little too windy and way too dry but the county gave me permission so I went for it. What you see there is me waiting with a drink for the pile to get cool enough to mound it over and leave it for the night. That pile in question was still glowing red three nights later.

I live down here because my wife hates that white stuff in your picture.

 

[Cataclysm]

Slingin sand and roto tilling to smooth up a yard with the new 4155HC!

 

[BradTx]

Thought I would share. Enjoying the new LS and all of the info on this site.

 

[lostcreekranch]

New EA 73" Wicked grapple for our LS XR4046HC. Great match for our HD 84" grapple.