dirtymartini
Silver Member
A few weeks ago when I brought my R 4047 home
PICTURES ONLY thread
- Thread starter TSO
- Start date
- Views: 261995
dirtymartini
Silver Member
Bentley Meredith
Member
Bentley Meredith
Member
Keltic
Bronze Member
- Joined
- Jul 20, 2003
- Messages
- 78
- Location
- Cape Breton Island
- Tractor
- 13 LS 7010C,91 Kubota L4150,Thomas 153S< Can Car C-4,BobCat 35E, BobCat 590,Pete 378 Tandem, Lots of other junk.
Ralph Copp
Bronze Member
- Joined
- Jul 10, 2011
- Messages
- 93
- Location
- Albert County, NB Canada
- Tractor
- 135 MF, 7010 LS, 510B John Deere Backhoe, 660 Grizzley, 70 hp Speed Boat
Busy fall, plowing field to rid alders. Cutting and collecting wood. Bush cutting field for neighbor. Adding 3" to back drag. Getting 7010 setup for winter.
ncrebel8
New member
- Joined
- Jan 21, 2015
- Messages
- 24
- Location
- Warrenton, NC
- Tractor
- LS U5030C, JD 2955, JD 7610, Ford 3930, MF 135, Gleaner M2
To wet to do anything, sitting in the house bored, so...
The wife cutting while I was going to the other farm,
Posted before, the beginning of a new horse pasture,
Spreading lime/waste mixture on the hay fields..
The ever present co-pilot,
The wife cutting while I was going to the other farm,
Posted before, the beginning of a new horse pasture,
Spreading lime/waste mixture on the hay fields..
The ever present co-pilot,
Blue hood
Member
Hi there
I recently bought an LS R4041 and made some add-ons like a 12,000lb winch and a front and back 400 watts total on bar lights, (not yet wired).
I like to know if any of this charge could overwhelm my 80amps AGM battery, and if that's the case, if I should add a 22 amp second battery kit
(XS Power XP750CK).
NOTE: All are not to run a the same time.
Thanks
I recently bought an LS R4041 and made some add-ons like a 12,000lb winch and a front and back 400 watts total on bar lights, (not yet wired).
I like to know if any of this charge could overwhelm my 80amps AGM battery, and if that's the case, if I should add a 22 amp second battery kit
(XS Power XP750CK).
NOTE: All are not to run a the same time.
Thanks
lostcreekranch
Super Member
- Joined
- Dec 14, 2012
- Messages
- 7,948
- Location
- Austin County, Texas
- Tractor
- NH TL-100A with Bush Hog 5045 FEL, WR Long 3rd function, LS XR4155HC w/FEL, WR Long 3rd Function.
What is power requirements of the winch?
400 watts for LED Light bars? That's 33.4 amps. That's a lot of light? 4 x 48 watt LED lights will give you a lot of light and give you ability to point lights as you need. Light bars are over rated IMHO.
Sent from my iPad using TractorByNet